WATTS SentryPlus Alert Flood Sensor Connection Kit
Flood Protection for Reduced-Pressure Assemblies for BMS and cellular communication
SentryPlus Alert Flood Sensor Connection Kit is an ideal solution for upgrading reduced-pressure backflow preventers to include flood protection. The kits are available for select Watts and Ames assembly series and are compatible with building management systems and cellular networks.
Đặc điểm kỹ thuật
The Watts Flood Sensor Connection Kit shall monitor for excessive relief valve discharge from a Reduced Pressure backflow preventer, and automatically trigger mechanisms that alert users to potential flood conditions. The BMS connection kit shall include an activation module, a ground wire, and a power adapter. The cellular connection shall include the same components plus the Cellular Gateway. Each kit shall be purchased separately from the assembly with the flood sensor. A signal from the factory-installed flood sensor shall be received by the activation module when a discharge is detected. If the discharge meets the conditions of a qualifying event, the normally open contact shall close to relay a signal to the BMS input terminal or to the Cellular Gateway, depending on the configuration in use. The Cellular Gateway shall transmit a signal to the Watts Syncta Cloud IoT platform to issue alerts according to the user’s preference of email, phone call, or text message. The activation module shall include adjustable settings for wet threshold and timer delay. The timer delay shall prevent the alert system from issuing false warnings on intermittent discharges from the relief valve.
Đặc trưng
- Installs with no disruption to service
- Detects excessive water discharge from the assembly relief valve
- Activates the flood sensor and provides connectivity to third-party building management systems
- Connects to BMS through dry contact output from the kit (No communication protocol integration required.)
- Activates the flood sensor and provides connectivity to the Watts SynctaSM Cloud IoT platform to issue alerts by email, phone call, and text message
- It is customizable for a wet threshold and a timer delay
Nội dung
Bộ kết nối cảm biến lũ BMS
- Activation module with 8-foot cable
- Power adapter, 24V DC
- Dây nối đất
Bộ kết nối cảm biến lũ lụt di động
- Activation module with 8-foot cable
- Cổng di động có phần cứng gắn kết
- Power adapter, 24V DC
- Dây nối đất
Hãy gọi cho bộ phận chăm sóc khách hàng nếu bạn cần hỗ trợ về thông tin kỹ thuật.
ĐỂ Ý
Use of the SentryPlus Alert Flood Sensor Connection Kit does not replace the need to comply with all required instructions, codes, and regulations related to the installation, operation, and maintenance of the relief valve to which it is attached, including the need to provide proper drainage in the event of a discharge. Watts is not responsible for the failure of alerts due to connectivity issues, power outages hoặc cài đặt không đúng cách.
Thông tin trong tài liệu này không nhằm thay thế thông tin cài đặt sản phẩm đầy đủ và thông tin an toàn có sẵn hoặc kinh nghiệm của người lắp đặt sản phẩm được đào tạo. Bạn được yêu cầu đọc kỹ tất cả các hướng dẫn lắp đặt và thông tin an toàn của sản phẩm trước khi bắt đầu lắp đặt sản phẩm này.
Cài đặt điển hình
Hoạt động
The SentryPlus Alert system helps protect against property damage resulting from excessive relief valve discharge, which could be worsened by a blocked or overwhelmed floor drain. The discharge may be caused by one of these typical conditions.
- Fouled first check seat caused by dirt, debris, or rocks
- Failed the first check spring
- Clogged or blocked relief valve sensing line
- Failed relief valve diaphragm
The sensor connection kit is designed to activate the factory-installed sensor attached to the assembly relief valve. (The sensor is installed on the valve exterior and does not alter valve functions or certifications.) When an excessive discharge occurs, the sensor energizes a relay signaling potential flooding. The activation module receives a signal from the flood sensor when a discharge is detected. If the discharge meets the conditions of a qualifying event, the normally open contact is closed to provide a signal to the BMS or the Cellular Gateway input terminal. In a BMS configuration, the signal sent to the BMS input may trigger alerts distributed according to the BMS application. In configurations using cellular communication, the sensor relay triggers the Cellular Gateway to communicate with the Watts Syncta Cloud IoT platform. Registered users who are linked to specific assemblies receive alerts by their preferred notification method: email, phone call, or text message.
Mô-đun kích hoạt
The activation module contains the electronic circuit assembly, interfaces with the flood sensor, and provides connectivity to the BMS input terminal or the Cellular Gateway. Cân nặng: <0.25 lb. The module is designed with adjustable settings for wet threshold (sensitivity to water discharge) and timer delay (duration before alarm). For more information on custom flood sensor settings, download IS-FloodSensor-Settings.
Cổng di động
The Cellular Gateway is included only in the cellular flood sensor connection kit. The activation module is hardwired to the Cellular Gateway for constant communication between the two devices. In turn, the Cellular Gateway communicates to the Watts Syncta Cloud IoT platform when a qualifying discharge event occurs. Specifically, a signal of potential flood conditions from the Cellular Gateway prompts the Syncta application to alert users by email, phone call, or text message.
Dây nối đất
- 24AWG
- Solid core, uninsulated, tinned copper wire
- Tuân thủ RoHS
- 5 feet
Bộ đổi nguồn
- Đầu ra DC voltage:24V ±2.0%
- Phạm vi dòng điện đầu ra: 0 ~ 1.04A
- Đầu vào voltagphạm vi e:90 ~ 264VAC
- Dải tần số đầu vào:47 ~ 63Hz
- Đầu vào dòng điện xoay chiều :0.7A/115VAC 0.35A/230VAC
Đặc điểm kỹ thuật
Job Name –––––––––––––––––––––––––––––––––––––––––––– Contractor ––––––––––––––––––––––––––––––––––––––––––––
Job Location –––––––––––––––––––––––––––––––––––––––––– Approval ––––––––––––––––––––––––––––––––––––––––––––––
Engineer ––––––––––––––––––––––––––––––––––––––––––––– Contractor’s P.O. No. –––––––––––––––––––––––––––––––––––
Approval ––––––––––––––––––––––––––––––––––––––––––––– Representative –––––––––––––––––––––––––––––––––––––––––
Câu hỏi thường gặp
What should I do if I need technical assistance with the product?
For technical assistance, please contact customer service for support with technical details.
Does using the SentryPlus Alert Flood Sensor Connection Kit replace all required instructions and regulations?
No, using the kit does not replace the need to comply with all required instructions, codes, and regulations related to the installation, operation, and maintenance of the relief valve.
What happens if there are connectivity issues or power outages ảnh hưởng đến cảnh báo?
Watts is not responsible for alert failures due to connectivity issues, power outages hoặc cài đặt không đúng cách.
Can I modify the product design or specifications?
Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice.
Tài liệu / Tài nguyên
 |
WATTS SentryPlus Alert Flood Sensor Connection Kit [tập tin pdf] Hướng dẫn sử dụng LF919-QT-FS, LF919, 957, 994, 400, C500, 4000SS, 5000SS, 009, LF009, LFU009, SS009, U009, LF909 Small, LF909 Large, 909RPDA, SentryPlus Alert Flood Sensor Connection Kit, SentryPlus Alert, Flood Sensor Connection Kit, Sensor Connection Kit, Connection Kit, Kit |