Hướng dẫn sử dụng Máy in Pantum

To assist you effectively, we need to identify your specific model. Since you have a Pantum color laser multifunction printer with fax and wireless capabilities, it is likely part of the CM2200, CM2100, hoặc CM2800 loạt.

1. Finding your Model Name:
Check the front or top of the printer body; the model name (e.g., CM2200FDW) is usually printed near the control panel. Alternatively, look for a white sticker on the back or side of the device containing the Serial Number and Model Name.

2. Entering Fax Contacts:
Most Pantum multifunction printers allow you to manage contacts in two ways:

• Via the Control Panel: Điều hướng đến Fax menu, look for Sổ địa chỉ or Liên hệvà chọn Thêm vào or Mới. Use the keypad to enter the name and fax number.
• Thông qua Web Interface (Embedded Web Máy chủ): This is often the easiest method. Find your printer's IP address (usually under Network Settings), type that IP into a web browser on your computer, and look for a tab labeled Sổ địa chỉ or Phím tắt to add fax numbers.
• Thông qua phần mềm PC: If you installed the Pantum driver suite, there is often a "Pantum Scan Application" or "Fax Utility" that allows you to sync contacts from your computer.

If you cannot find these menus, please reply with the specific model name found on the sticker so we can provide exact step-by-step instructions for that interface.

To scan documents to your PC with the Pantum M18DW, you must use the Pantum Scan Application hoặc Pantum Mobile App, as the printer requires specific drivers to communicate with your computer's scanning interface.

Follow these steps to locate and use the scanner:

• Cài đặt trình điều khiển: Ensure you have installed the full driver package from the Hỗ trợ Pantum webđịa điểm. This package includes the "Pantum Scan Application."
• Using the Pantum Scan App: Open the Pantum Scan application on your PC. Place your document face down on the scanner glass or face up in the Automatic Document Feeder (ADF). Select your preferred settings (PDF, JPEG, etc.) and click "Scan."
• WIA/TWAIN: Once drivers are installed, you can also locate the scanner within Windows by searching for "Windows Fax and Scan" or using the "Scanners and Cameras" section in the Control Panel.

If you cannot find the scanner on your network, ensure the printer and PC are on the same Wi-Fi network or connected via USB. For further assistance, you can contact Pantum support at Pantum-service@pantum.com.