Giới thiệu
The SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M) is a versatile wireless controller designed to enhance your smart home experience. It features four distinct buttons, each supporting multiple actions (single-press, double-press, triple-press, and long-press), providing up to 16 different scene triggers for controlling lights, routines, and various home automation tasks.
Its innovative split magnetic design allows it to function as a fixed wall switch or a portable handheld remote. The device supports dual protocols (Zigbee and eWeLink-Remote) for broad compatibility with smart home ecosystems, including popular open-source platforms like Home Assistant and Zigbee2MQTT. With TouchLink and Home Assistant Bindings, it offers fast and stable local control, minimizing cloud delays for reliable performance. The wire-free design ensures easy installation anywhere using magnets, adhesive, or screws.
1. Thiết lập
1.1 Mở hộp
Carefully unbox your SONOFF Orb 4-in-1 Zigbee Smart Scene Button. The package typically includes the button, a magnetic base, adhesive, and screws for installation.
PHIM 1.1: Unboxing the SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M). This video demonstrates the contents of the product packaging and initial handling of the device.
Hình 1.1: The SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M) held in hand, showing its four distinct button quadrants.
1.2 Cài đặt
The SNZB-01M offers flexible, wire-free installation options. It can be mounted using the included magnetic base, adhesive, or screws. The magnetic design allows the button to be detached from its base for use as a portable remote.
- Gắn từ tính: Attach the magnetic base to a metallic surface or use the adhesive to fix it to a wall. The button can then be magnetically attached to the base.
- Lắp đặt bằng keo dính: Use the provided adhesive pad to secure the magnetic base to any clean, flat surface.
- Gắn vít: For a more permanent installation, use the included screws to fix the magnetic base to a wall.
Hình 1.2: Quaview of the SNZB-01M's features, including its magnetic split design for flexible placement and various trigger actions.
Hình 1.3: Examples of flexible placement for the SONOFF Orb button, including on a nightstand, coffee table, and refrigerator.
1.3 Ghép nối và kết nối
The SNZB-01M supports both Zigbee and eWeLink-Remote protocols. A switch on the device allows you to select the desired mode for pairing with your smart home gateway.
Hình 1.4: The dual-protocol switchable feature of the SNZB-01M, allowing integration with both eWeLink-Remote and Zigbee gateways.
Để ghép nối thiết bị:
- Select the desired protocol (Zigbee or eWeLink-Remote) using the switch on the back of the device.
- Put your compatible smart home gateway into pairing mode.
- Press the pairing button on the SNZB-01M (often indicated by three dots) for a few seconds until the indicator light confirms pairing mode.
- Confirm successful pairing through your gateway's application or interface.
The SNZB-01M is compatible with various platforms, including Home Assistant and Zigbee2MQTT, often requiring a SONOFF Zigbee gateway or similar open-source dongle for full functionality.
Hình 1.5: The SNZB-01M's compatibility with open-source platforms, demonstrating integration with Home Assistant and Zigbee2MQTT via SONOFF Dongle Series.
Hình 1.6: Detailed compatibility table for the SNZB-01M, outlining supported platforms, required gateways, and available trigger actions for each.
2. Vận hành thiết bị
2.1 Kiểm soát cảnh
The SONOFF Orb 4-in-1 button provides 16 possible scene triggers through its four quadrants. Each quadrant supports single-tap, double-tap, triple-tap, and long-press actions. These actions can be configured within your smart home platform to activate specific scenes or control individual devices.
PHIM 2.1: Demonstrating the various tap and press actions (single, double, triple, long-press) of the SONOFF Orb button and how they can be used to set smart scenes for one-tap control of lights, curtains, and other devices.
Examples of scene control:
- Chạm một lần: Turn on/off a specific light.
- Nhấn đúp: Activate a "Movie Mode" scene (dim lights, close blinds).
- Nhấn ba lần: Trigger a "Good Night" routine (turn off all lights, lock doors).
- Nhấn và giữ: Adjust brightness of a light or open/close curtains gradually.
Hình 2.1: Visual representation of controlling lights and curtains with the SNZB-01M button.
2.2 TouchLink Functionality
The SNZB-01M supports TouchLink, simplifying the direct pairing and control of compatible smart bulbs without needing a central hub or gateway for basic functions. This allows for faster, more reliable responses.
To use TouchLink:
- Ensure the smart bulb is powered on and in pairing mode (refer to the bulb's manual).
- Hold the Orb 4-in-1 button close to the smart bulb (within 10 cm).
- Press and hold one of the button quadrants on the Orb until the bulb responds (e.g., flashes or changes brightness), indicating successful pairing.
Note: TouchLink support varies by brand and model of the smart bulb. Refer to the specifications of your bulb for accurate information.
Hình 2.2: How to use TouchLink for simple pairing and direct control of smart bulbs with the SNZB-01M.
3. Bảo trì
3.1 Thay thế pin
The SONOFF Orb 4-in-1 button is powered by a CR2477 Lithium Metal battery. When the battery level is low, the device's indicator may signal this, or you may notice reduced responsiveness. To replace the battery:
- Gently twist or pry open the back cover of the button to access the battery compartment.
- Tháo pin CR2477 cũ ra.
- Insert a new CR2477 Lithium Metal battery, ensuring correct polarity.
- Đóng nắp lưng lại một cách an toàn.
Vứt bỏ pin đã qua sử dụng một cách có trách nhiệm theo quy định của địa phương.
3.2 Vệ sinh
To clean the device, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or internal components. Ensure the device is dry before use.
KHAI THÁC. Xử lý sự cố
4.1 Thiết bị không phản hồi
- Kiểm tra pin: Ensure the battery is not depleted. Replace the CR2477 battery if necessary.
- Kiểm tra kết nối: Verify that the device is properly paired with your Zigbee or eWeLink-Remote gateway. If not, attempt to re-pair the device.
- Phạm vi: Ensure the device is within the effective range of your gateway or a strong Zigbee mesh network.
- Sự can thiệp: Minimize potential interference from other wireless devices.
4.2 Issues with Home Assistant (ZHA)
If you are using the SONOFF Orb 4-in-1 with Home Assistant via ZHA and experience issues with all 16 trigger combinations being recognized, it may require a specific ZHA script or "quirks file".
- ZHA Script Requirement: As of early 2026, using the Orb 4-in-1 with ZHA may require downloading and installing a specific ZHA script. Refer to the official SONOFF Help Center or community forums for detailed instructions and the necessary files.
- Event Recognition: Without the correct script, some button actions (e.g., button 2, 3, 4 actions beyond single press) might only register as generic "step" or "stop" events instead of distinct triggers.
4.3 eWeLink Mode Pairing Difficulties
Some users may encounter difficulties pairing the device in eWeLink mode. If the device briefly appears in the eWeLink app during pairing but then disappears, ensure:
- The device is correctly switched to eWeLink mode.
- The eWeLink gateway is in pairing mode and functioning correctly.
- You are pressing the correct pairing button (button 3, often marked with three dots) on the Orb.
If issues persist in eWeLink mode, consider trying Zigbee mode if your setup allows, as it has been reported to be more straightforward for some users.
5. Thông số kỹ thuật
Hình 5.1: Detailed technical specifications for the SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M).
| Người mẫu | SNZB-01M |
| Thương hiệu | SONOFF |
| Giao thức kết nối | ZigBee |
| Phương pháp kiểm soát | Nút nhấn |
| Loại điều khiển | Multi-Scene |
| Hoạt động Voltage | 3 vôn |
| Xếp hạng hiện tại | 1 Amps |
| Loại pin | Pin Lithium CR2477 (đã bao gồm) |
| Vũ trụ | TLSR8656F512ET32 |
| Kích thước sản phẩm (D x R x C) | 1.97 x 1.97 x 0.88 inches (approx. φ50x22.5mm) |
| Trọng lượng sản phẩm | 3.52 ounce |
| Nhiệt độ hoạt động | -10°C ~ 60°C |
| Độ ẩm hoạt động | 5-95% RH, không ngưng tụ |
| Vật liệu | Nhựa |
| Bảo vệ quốc tế Rating | IP00 |
| Thiết bị tương thích | Home Assistant, Zigbee2MQTT, ZigBee-compatible devices |
6. Thông tin bảo hành
The SONOFF Orb 4-in-1 Zigbee Smart Scene Button (SNZB-01M) comes with a Bảo hành hai năm kể từ ngày mua. Bảo hành này bao gồm các lỗi sản xuất và trục trặc trong quá trình sử dụng bình thường. Vui lòng giữ lại hóa đơn mua hàng để yêu cầu bảo hành.
For detailed warranty terms and conditions, please refer to the official SONOFF webtrang web hoặc liên hệ với bộ phận hỗ trợ khách hàng.
Hình 6.1: Two-year warranty information.
7. Hỗ trợ khách hàng
If you require assistance with your SONOFF Orb 4-in-1 Zigbee Smart Scene Button, please contact our customer support team:
- E-mail: support@itead.cc
- Trung tâm trợ giúp trực tuyến: Hãy truy cập trang web chính thức của SONOFF website for FAQs, troubleshooting guides, and additional resources.
Hình 7.1: Customer support contact information.