Hướng dẫn sử dụng bộ khởi động khẩn cấp Acmount D18 6000A kèm máy nén khí.

1. Sản phẩm hếtview

The Acmount D18 is a versatile emergency car kit combining a powerful jump starter, a 150PSI tire inflator, a 21800mAh power bank, and a 600 lumen LED emergency light. Designed for reliability and ease of use, it is suitable for various vehicles and outdoor activities.

Figure 1: Acmount D18 Jump Starter with Air Compressor

2. Nội dung gói hàng

Xác minh rằng tất cả các mục đều có trong gói hàng của bạn:

• Portable Jump Starter with Air Compressor (1)
• Air Pump Hose (1)
• Gas Nozzles (4)
• Smart Jumper Cable with Clampgiây (1)
• USB-A to C Charge-In Cable (1)
• Portable Carrying Case (1)
• Hướng dẫn sử dụng (1)

Figure 2: All components included in the Acmount D18 package.

3. Thông tin an toàn

The Acmount D18 is equipped with 10 intelligent safety protections to ensure safe operation. Always follow these guidelines:

• Bảo vệ chống sạc ngược: Prevents current flow back to the jump starter from the vehicle battery.
• Bảo vệ phân cực ngược: Ensures correct connection to battery terminals. The smart clip indicator light will notify of incorrect use.
• quá mứctage Bảo vệ: Các biện pháp bảo vệ chống lại âm lượng quá mứctage.
• Bảo vệ nhiệt độ thấp: Operates safely in temperatures down to -4°F (-20°C).
• Bảo vệ nhiệt độ cao: Operates safely in temperatures up to 140°F (60°C).
• Bảo vệ quá dòng: Bảo vệ chống lại sự tiêu thụ dòng điện quá mức.
• Bảo vệ quá tải: Ngăn ngừa hư hỏng pin do sạc quá mức.
• Anti-Spark Protection: Minimizes the risk of sparks during connection.
• Bảo vệ quá tải: Shuts down if the load exceeds safe limits.
• Bảo vệ chống ngắn mạch: Ngăn ngừa hư hỏng do đoản mạch.

Always ensure the smart clip indicator light shows a solid green before attempting to jump start.

Figure 3: Built-in safety features for secure operation.

4. Getting Started: Charging the Unit

Before first use, fully charge the Acmount D18. It is recommended to recharge the unit every three months to maintain optimal battery health, even when not in use.

1. Locate the USB-C input port on the side of the unit, protected by a silicone cover.
2. Connect the provided USB-A to C charging cable to the unit and a suitable USB power adapter (not included).
3. The LCD display will indicate the charging status. Charge until the battery indicator shows full.

5. Operating the Jump Starter

The Acmount D18 can deliver a peak current of 6000A, capable of starting all gasoline engines and 10.0L diesel engines.

1. Kết nối Clamps: Open the engine start port cover on the unit. Connect the smart jumper cable to the unit. Ensure it is fully inserted.
2. Gắn vào pin: Kết nối cl màu đỏamp đến cực dương (+) của ắc quy xe và cực đenamp đến cực âm (-).
3. Xác minh kết nối: Wait for the LED indicator on the smart jumper cable to light up solid green. If it flashes red/green or shows no light, check connections for proper polarity and contact.
4. Khởi động xe: Bật động cơ ô tô.
5. Loại bỏ Clamps: Khi động cơ khởi động, hãy tháo clamps from the car battery within 30 seconds, then disconnect the smart jumper cable from the Acmount D18.

Figure 4: Easy steps for jump-starting your vehicle.

6. Operating the Tire Inflator

The integrated air compressor can inflate up to 150PSI, delivering 45L/min high airflow. It features automatic pressure detection and auto shut-off.

1. Kết nối ống khí: Screw the air pump hose into the designated port on the Acmount D18.
2. Attach to Tire: Connect the other end of the hose to the tire valve. Use appropriate gas nozzles for different inflatables (e.g., bicycle tires, balls, air cushions).
3. Bật nguồn và chọn chế độ: Press the power button to turn on the unit. Use the 'M' button to cycle through 5 inflation modes (Car, Motorcycle, Bicycle, Ball, Custom Mode) and the '+' / '-' buttons to set the desired pressure. The LCD digital display supports PSI/BAR/KPA units.
4. Bắt đầu lạm phát: Press the 'Start/Stop' button to begin inflation. The unit will automatically stop once the preset pressure is reached.
5. Ngắt kết nối: Remove the hose from the tire valve.

Figure 5: Simple steps for tire inflation.

7. Sử dụng như một cục sạc dự phòng

The 21800mAh battery can charge phones, tablets, and other devices via its dual USB output ports.

1. Locate the USB output ports (USB1-OUT, USB2-OUT) and the USB-C IN port on the side of the unit, protected by a silicone cover.
2. Connect your device's charging cable to the appropriate USB output port on the Acmount D18. USB2-OUT supports fast charging.
3. Thiết bị sẽ tự động bắt đầu sạc cho thiết bị của bạn.

Figure 6: Charging electronic devices with the integrated power bank.

8. Sử dụng đèn LED khẩn cấp

The Acmount D18 features a 600 lumen LED light with three modes for various emergency situations.

1. Kích hoạt ánh sáng: Press the light button (usually indicated by a lightbulb icon) on the unit to turn on the flashlight.
2. Chế độ chu kỳ: Press the light button repeatedly to cycle through the modes: Flashlight (steady beam), SOS (Morse code signal), and Strobe (rapid flashing).
3. Tắt: Continue pressing the light button until the light turns off, or long-press the button.

Figure 7: The multi-mode LED light provides illumination and signaling capabilities.

9. Thông số kỹ thuật

10. Bảo trì

To ensure the longevity and optimal performance of your Acmount D18, follow these maintenance tips:

• Sạc thường xuyên: Recharge the unit every three months, even if not used, to prevent deep discharge and prolong battery life.
• Kho: Store the unit in its portable carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Vệ sinh: Lau sạch thiết bị bằng khăn mềm, khô. Không sử dụng hóa chất mạnh hoặc chất tẩy rửa có tính mài mòn.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your Acmount D18, refer to the following common troubleshooting steps:

• Thiết bị không bật: Ensure the unit is charged. If the battery is completely depleted, it may take a few minutes of charging before it powers on.
• Jump Starter Not Working:
  • Check the smart clip indicator light: A solid green light indicates a correct connection. If it's flashing or red, recheck the clamps for proper polarity and secure contact with the battery terminals.
  • Ensure the smart jumper cable is fully inserted into the unit's engine start port.
  • The vehicle battery might be severely discharged. Allow the jump starter to connect for a few minutes before attempting to start.
• Tire Inflator Not Working:
  • Ensure the air pump hose is securely screwed into the unit and properly connected to the tire valve.
  • Check the selected inflation mode and target pressure on the LCD display.
  • Verify the unit has sufficient battery charge.
• Device Not Charging via USB: Ensure the USB cable is properly connected to both the Acmount D18 and your device. Check if the unit has enough power.

For persistent issues, please contact customer service.

12. Bảo hành và Hỗ trợ

Acmount provides lifetime technical support and 24/7 customer service. If you have any questions or require assistance, please contact our professional after-sales team for a satisfactory solution.

Contact information can typically be found on the product packaging or the official Acmount webđịa điểm.