1. Giới thiệu
This manual provides essential instructions for the safe and effective use, installation, and maintenance of your POWTREE 7000mAh 25.2V Li-ion replacement battery for Dyson V10 and SV12 series vacuum cleaners. Please read this manual thoroughly before installation and use.
2. Thông tin an toàn
- Không tháo rời, nghiền nát hoặc đâm thủng pin.
- Avoid exposing the battery to high temperatures (above 60°C/140°F) or direct sunlight.
- Không được làm chập mạch các cực của pin.
- Giữ pin tránh xa nước hoặc các chất lỏng khác.
- Bảo quản pin ở nơi khô ráo, thoáng mát khi không sử dụng.
- Hãy vứt bỏ pin đã qua sử dụng theo quy định của địa phương. Không vứt chung với rác thải sinh hoạt.
- Use only the original Dyson charger or a compatible charger designed for V10/SV12 batteries.
- If the battery shows signs of damage, overheating, or leakage, discontinue use immediately.
Image: The POWTREE V10 replacement battery features multiple safety protections, including overcharge, overvoltage, short circuit, and overcurrent protection, indicated by CE, FC, and RoHS certifications.
3. Nội dung gói hàng
Xác minh rằng tất cả các mục đều có trong gói hàng:
- 1 x POWTREE 7000mAh 25.2V Replacement Battery
- 1 x Tua vít
- 3 x Vít
- 1 x Post Filter
- 1 x Battery Protection Cap
Image: The complete package includes the replacement battery, a screwdriver, three screws, a post filter, and a battery protection cap for a comprehensive replacement solution.
4. Hướng dẫn cài đặt
Follow these steps to replace the battery in your Dyson V10 or SV12 series vacuum cleaner:
- Tắt nguồn: Ensure your Dyson vacuum cleaner is turned off and unplugged from any charging source.
- Locate Battery: The battery is typically located at the bottom of the main unit handle.
- Tháo ốc vít: Use the provided screwdriver to remove the screws securing the old battery. There are usually two screws: one near the charging port and another behind the pull-out washable filter.
- Detach Old Battery: Carefully slide the old battery out of its housing.
- Lắp pin mới: Align the POWTREE replacement battery with the vacuum cleaner's battery slot. Ensure the connectors are properly seated.
- Secure New Battery: Use the provided new screws to fasten the replacement battery securely into place. Do not overtighten.
- Install Post Filter: If replacing the post filter, remove the old filter by twisting it counter-clockwise and then insert the new filter, twisting clockwise to secure it.
- Mức phí ban đầu: Nên sạc đầy pin mới trước khi sử dụng lần đầu.
Image: This diagram illustrates the components included in the package, which are essential for the battery replacement process.
Image: Visual guide demonstrating the simple steps to install and clean the included post filter, ensuring optimal vacuum performance.
5. Hướng dẫn vận hành
5.1 Sạc pin
- The POWTREE replacement battery is designed to be compatible with your original Dyson V10/SV12 charger and charging stand.
- Connect the vacuum cleaner to its charging station or directly to the charger.
- The LED indicators on the battery will illuminate to show the charging status. A full charge is indicated when all LEDs are solid.
- Avoid leaving the battery on the charger for extended periods after it is fully charged to prolong its lifespan.
5.2 Đèn báo pin
The battery features LED indicators to display the remaining charge level and charging status. Refer to your Dyson vacuum cleaner's original manual for specific indicator patterns, as they typically reflect the battery status.
Hình ảnh: Chi tiết view of the battery's design, highlighting the charging port, LED indicators for charge status, and the control button.
6. Bảo trì
6.1 Chăm sóc pin
- For optimal performance, fully charge the battery before each use.
- If the vacuum cleaner will not be used for an extended period, store the battery at approximately 50% charge in a cool, dry place.
- Tránh xả cạn pin thường xuyên, vì điều này có thể làm giảm tuổi thọ tổng thể của pin.
6.2 Bảo trì bộ lọc
The included post filter is washable and reusable. Regular cleaning of the filter is crucial for maintaining optimal suction power and battery efficiency.
- Xóa bộ lọc: Twist the post filter counter-clockwise to detach it from the vacuum cleaner.
- Rửa: Rửa bộ lọc dưới vòi nước lạnh cho đến khi nước trong. Không sử dụng chất tẩy rửa.
- Khô: Allow the filter to air dry completely for at least 24 hours before reinserting it. Ensure it is thoroughly dry to prevent damage to the motor.
- Cài đặt lại: Once dry, reinsert the filter by twisting it clockwise until secure.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Pin không sạc được | Charger not connected properly; Faulty charger; Battery issue | Ensure charger is securely connected. Try a different outlet. If problem persists, contact support. |
| Thời gian chạy ngắn | Filter clogged; Battery not fully charged; Battery degradation | Clean the filter. Ensure battery is fully charged. If battery is old, consider replacement. |
| Vacuum cleaner not turning on | Battery not installed correctly; Battery completely drained; Safety cutoff activated | Reinstall battery, ensuring secure connection. Charge battery. Check for obstructions in the vacuum. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact POWTREE customer support for assistance.
8. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Người mẫu | V10 |
| Tậptage | 25.2V |
| Dung tích | 7000mAh |
| Loại pin | Pin Lithium Ion |
| Watt-giờ | 1176.4Wh |
| Khả năng tương thích | Dyson V10 Allergy, Cyclone V10 Animal, V10 Absolute, V10 Motorhead, V10 Motorhead Origin, V10 Total Clean+, SV12 Series |
| Chứng nhận | CE, FCC, ROHS |
| Kích thước gói hàng | 7.56 x 5.67 x 3.9 inch |
| Trọng lượng sản phẩm | 1.43 pound |
Image: Key product parameters are displayed, confirming the battery type as Li-ion, voltage at 25.2V, and a capacity of 7000mAh.
Image: This visual confirms the battery's compatibility with Dyson V10 and SV12 series vacuum cleaners, including models like V10 Animal, V10 Absolute, and V10 Motorhead.
9. Bảo hành và Hỗ trợ
POWTREE provides a Bảo hành 12 tháng for this V10 replacement battery. For any questions, concerns, or technical assistance, please contact our professional customer support team. We offer 24-hour online support to ensure your satisfaction.
For support, please refer to the contact information provided with your purchase or visit the official POWTREE store on Amazon.
