Giới thiệu
This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your Ikea VIRRMO LED Ceiling Lamp. Please read all instructions carefully before beginning installation or use. Keep this manual for future reference.
The Ikea VIRRMO LED ceiling lamp is a 36 cm nickel-plated fixture designed to provide 800 lumens of warm white light (2700K) with a high Colour Rendering Index (>80). It features energy-efficient LED technology with an estimated lifespan of 15,000 hours.
Thông tin an toàn
- Always disconnect power at the main fuse or circuit breaker before installation or maintenance.
- Việc lắp đặt phải được thực hiện bởi thợ điện có trình độ theo đúng quy định về điện tại địa phương.
- Không sửa đổi lamp theo bất kỳ cách nào.
- Ensure the ceiling structure can support the weight of the lamp.
- Sản phẩm này chỉ dùng trong nhà.
Nội dung gói
- Đèn LED âm trần VIRRMO Lamp (1 đơn vị)
- Phụ kiện lắp đặt (ốc vít, tắc kê tường)
- Hướng dẫn sử dụng
Note: A ceiling hook is required for installation but is not included in the package.
Thiết lập và cài đặt
Follow these steps for proper installation of your VIRRMO LED Ceiling Lamp. Professional wired-in installation is recommended.
- Chuẩn bị khu vực lắp đặt: Hãy đảm bảo rằng nguồn điện cấp cho khu vực lắp đặt đã được ngắt tại cầu dao chính.
- Đánh dấu điểm khoan: Hold the mounting bracket (if separate) or the lamp base against the ceiling at the desired installation point. Mark the positions for drilling.
- Lỗ khoan: Khoan lỗ tại các vị trí đã đánh dấu. Lắp tắc kê phù hợp nếu cần.
- Giá đỡ/đế gắn chắc chắn: Attach the mounting bracket or the lamp base securely to the ceiling using the provided screws. Ensure it is firmly fixed.
- Kết nối điện: Nối dây điện từ trần nhà xuống...amp's terminals. Ensure correct polarity (Live to Live, Neutral to Neutral, Earth to Earth). Use appropriate wire connectors.
- Gắn chữ Lamp: Cẩn thận gắn lamp body to the secured mounting bracket or base. Ensure all connections are tight and the lamp là ổn định.
- Khôi phục điện: Sau khi quá trình lắp đặt hoàn tất và tất cả các kết nối đã được đảm bảo chắc chắn, hãy cấp lại nguồn điện tại cầu dao chính.
- Kiểm tra Lamp: Turn on the light switch to ensure the lamp chức năng một cách chính xác.

Image: The Ikea VIRRMO LED Ceiling Lamp, nickel-plated, installed on a ceiling, illuminating the area with warm light.

Image: A detailed close-up of the VIRRMO lamp, highlighting its brushed nickel-plated housing and the acrylic diffuser for even light distribution.
Hướng dẫn sử dụng
The Ikea VIRRMO LED Ceiling Lamp is designed for simple operation via a standard wall switch connected to its power supply.
- Bật/Tắt: Sử dụng công tắc gắn tường được kết nối với lamp's electrical circuit to turn the light on or off.
- Công suất phát sáng: Cái lamp provides a consistent 800 lumens of warm white light at a color temperature of 2700K. It is not dimmable unless connected to a compatible dimming system (not included and requires professional installation).
- Hiệu quả năng lượng: The integrated LED technology ensures low power consumption (11 watts) and a long operational life.
BẢO TRÌ
To ensure the longevity and optimal performance of your VIRRMO LED Ceiling Lamp, hãy làm theo các hướng dẫn bảo trì đơn giản sau:
- Vệ sinh: Ngắt nguồn điện trước khi vệ sinh. Lau sạch.amp với một mềm mại, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or acrylic diffuser.
- Tuổi thọ LED: The integrated LED light source is designed to last approximately 15,000 hours. The LEDs are not replaceable. If the light source fails, the entire fixture should be replaced.
- Điều tra: Periodically check for any loose connections or signs of wear. If any issues are found, consult a qualified electrician.
Xử lý sự cố
If your VIRRMO LED Ceiling Lamp Nếu hệ thống không hoạt động như mong đợi, hãy xem xét các vấn đề và giải pháp thường gặp sau đây:
- Đèn không bật:
- Check if the wall switch is in the 'ON' position.
- Verify that the main circuit breaker for the lighting circuit is not tripped.
- Hãy đảm bảo tất cả các kết nối điện đều chắc chắn. Nếu không chắc chắn, hãy tham khảo ý kiến của một thợ điện có chuyên môn.
- Ánh sáng nhấp nháy:
- Ensure all electrical connections are tight. Loose connections can cause flickering.
- Xác nhận rằng lamp is not connected to an incompatible dimmer switch.
- Giảm độ sáng:
- Cái lamp provides a fixed brightness of 800 lumens. If it appears dimmer, ensure the diffuser is clean.
If problems persist after attempting these solutions, contact Ikea customer support or a qualified electrician.
Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Số hiệu mẫu | 90455661 |
| Thương hiệu | Ikea |
| Loại ánh sáng | DẪN ĐẾN |
| Độ sáng | 800 Lumen |
| Màu sáng | Trắng ấm (2700K) |
| Chỉ số hoàn màu (CRI) | >80 |
| Tiêu thụ điện năng | 11 Watt |
| Tuổi thọ ước tính | 15,000 giờ (khoảng 10 năm nếu học 3 giờ/ngày) |
| Kích thước (Đường kính x Chiều cao) | 36 cm x 7.6 cm (14 inch x 3 inch) |
| Vật liệu | Acrylic plastic, Steel (Brush finish nickel-plated, Powder coating) |
| Sử dụng trong nhà/ngoài trời | Trong nhà |
| Nguồn điện | Điện có dây |
| Nước xuất xứ | Trung Quốc |
Thông tin bảo hành
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or visit the official Ikea webTrang web. Phạm vi bảo hành thường bao gồm các lỗi về vật liệu và tay nghề trong điều kiện sử dụng bình thường.
Hỗ trợ khách hàng
If you have any questions, require assistance with installation, or need to report a defect, please contact Ikea customer support through their official website or the contact information provided with your purchase. When contacting support, please have your model number (90455661) and purchase details readily available.
Bạn có thể tìm thêm thông tin và chi tiết liên lạc trên trang web chính thức Ikea webđịa điểm.





