Hướng dẫn sử dụng+

Comfort Direct CDTR214D

Comfort Direct Bradbury Ceiling Fan Remote Control User Manual

Model: CDTR214D | Brand: Comfort Direct

Giới thiệu

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Comfort Direct Bradbury Ceiling Fan Remote Control (Model CDTR214D). Please read this manual thoroughly before use to ensure proper functionality and safety. This remote is designed for use with specific Harbor Breeze Bradbury Ceiling Fan models, including BRD48MBK6LR, BRD48BNK6LR, BRD48OSB6LR, BRD48MWW6LR, BRD60MBK6LR, BRD60BNK6LRS, and BRD60OSB6LR.

Thông tin an toàn

Always ensure the power to the ceiling fan is turned off at the circuit breaker before performing any installation or maintenance. Do not expose the remote control to water or excessive moisture. Keep batteries out of reach of children. Dispose of used batteries responsibly.

Nội dung gói

  • 1 x Comfort Direct Bradbury Ceiling Fan Remote Control
  • 1 x Giá đỡ treo tường
  • 2 x Vít lắp
Comfort Direct Bradbury Ceiling Fan Remote Control with Wall Mount and Screws

Image: The remote control, its wall mount holder, and two mounting screws, illustrating the complete package contents.

Thông số kỹ thuật

Số hiệu mẫuCDTR214D
Kích thước sản phẩm2 x 1 x 4 inch
Trọng lượng sản phẩm6 ounce
Yêu cầu về pin1 x 23A 12V battery (not included)
Tính năng đặc biệtRadiofrequency (RF) control
Thiết bị tương thíchHarbor Breeze Bradbury Ceiling Fans (BRD48MBK6LR, BRD48BNK6LR, BRD48OSB6LR, BRD48MWW6LR, BRD60MBK6LR, BRD60BNK6LRS, BRD60OSB6LR)

Cài đặt

1. Lắp đặt pin

  1. Xác định vị trí ngăn chứa pin ở mặt sau của điều khiển từ xa.
  2. Trượt nắp pin xuống dưới để mở.
  3. Insert one 23A 12V battery, ensuring the polarity (+/-) matches the diagram inside the compartment.
  4. Trượt nắp pin trở lại vị trí cho đến khi nó khớp chặt.
Back of the remote control showing the open battery compartment

Hình ảnh: Phía sau view of the remote control with the battery cover removed, revealing the battery compartment for a 23A 12V battery.

2. Pairing the Remote Control with Your Ceiling Fan

Quan trọng: Only one remote can be programmed per fan. You cannot use two separate remotes to control the same fan.

  1. Turn Power Off To Fan: Ensure the power supply to your ceiling fan is completely off at the wall switch or circuit breaker.
  2. Turn Power Back On To Fan: Khôi phục lại nguồn điện cho quạt trần.
  3. Press and Hold "0" Key: Within 30 seconds of restoring power, press and hold the "0" button on your remote control for 5 seconds. The fan light should blink or the fan should briefly turn on to indicate successful pairing.
Image showing the three steps for pairing the remote: Power off fan, Power on fan, Press and hold '0' key for 5 seconds.

Image: Visual guide for the remote pairing process, showing the three key steps.

3. Lắp đặt giá treo tường

The included wall mount holder allows for convenient storage of your remote control.

  1. Choose a suitable location on a wall, away from direct sunlight or heat sources.
  2. Use the two provided screws to securely attach the wall mount holder to the wall.
  3. Place the remote control into the holder for easy access.
Remote control placed in its wall mount holder, installed on a wall next to a living room with a ceiling fan

Image: The remote control securely placed in its wall mount holder, demonstrating its convenient placement on a wall.

Hướng dẫn sử dụng

Once paired, your remote control provides full control over your compatible ceiling fan and its light.

Đằng trước view of the Comfort Direct Bradbury Ceiling Fan Remote Control

Hình ảnh: Mặt trước view of the remote control, showing the fan speed buttons (1, 2, 3, 0) and the light control button.

Kiểm soát tốc độ quạt

  • Nhấn "1" for Low fan speed.
  • Nhấn "2" for Medium fan speed.
  • Nhấn "3" for High fan speed.
  • Nhấn "0" để tắt quạt.

Light Control with Dimming

  • Nhấn nút Nút sáng (usually depicted as a light bulb icon) to turn the fan light On or Off.
  • To dim the light, press and hold the Nút sáng. Release the button when the desired brightness level is reached.

BẢO TRÌ

Thay thế pin

When the remote control's range decreases or it becomes unresponsive, it is likely time to replace the battery. Follow the battery installation steps outlined in the "Setup" section to replace the 23A 12V battery. Ensure proper disposal of the old battery according to local regulations.

Vệ sinh

Lau sạch điều khiển từ xa bằng vải mềm, khô. Không sử dụng chất tẩy rửa có tính ăn mòn hoặc dung môi, vì chúng có thể làm hỏng bề mặt hoặc các bộ phận bên trong.

Xử lý sự cố

  • Điều khiển từ xa không phản hồi:
    • Kiểm tra xem pin đã được lắp đúng cách và có đủ điện hay chưa. Thay pin nếu cần thiết.
    • Ensure the remote is within range of the fan's receiver.
    • Hãy thử lại quá trình ghép nối như mô tả trong phần "Thiết lập".
  • Fan or light not responding after pairing:
    • Verify that the power to the fan is on at the wall switch or circuit breaker.
    • Confirm that the remote was successfully paired (fan light blink or brief fan operation). If not, repeat the pairing steps carefully.
    • Ensure no other remote is attempting to control the same fan, as only one remote can be paired per fan.

Bảo hành

This Comfort Direct Bradbury Ceiling Fan Remote Control comes with a Bảo hành của nhà sản xuất 1 năm from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For warranty service, please contact Comfort Direct customer support.

Ủng hộ

For further assistance, technical support, or inquiries regarding your Comfort Direct Bradbury Ceiling Fan Remote Control, please visit the Comfort Direct website or contact their customer service department. Contact information can typically be found on the product packaging or the official Comfort Direct webđịa điểm.