Ensenior Solar Security Light User Manual (Model AQ2-11I-65K-02-BL-4T-ZY-M01)

Giới thiệu

Thank you for choosing the Ensenior Solar Security Light. This manual provides detailed instructions for the safe and efficient use of your new solar-powered outdoor lighting system. Please read this manual thoroughly before installation and operation, and retain it for future reference.

Image: Two Ensenior Solar Security Lights and their remote control, showcasing the product packaging and contents.

Nội dung gói

Xác minh rằng tất cả các mục được liệt kê dưới đây đều có trong gói hàng của bạn:

• Solar Motion Sensor Lights x 2
• Điều khiển từ xa x 1
• Hướng dẫn sử dụng x 1
• Mounting Screws x 2 (for each lamp)
• Wall Plugs x 2 (for each lamp)

Image: A visual representation of the package contents, including two solar lights, a remote control, a user manual, mounting screws, and wall plugs.

Thiết lập và cài đặt

Before initial use, ensure the solar light is charged in direct sunlight for 6-8 hours. If the battery is depleted, it is advisable to charge for 2-3 days to reset the desired mode. The recommended installation height is 8.2 feet, with solar panels facing direct sunlight without obstacles.

1. Chọn địa điểm: Chọn một địa điểm ngoài trời có khả năng thu hút gió. ampTiếp xúc trực tiếp với ánh nắng mặt trời suốt cả ngày để sạc pin tối ưu.
2. Lỗ khoan: Drill two holes in the wall at the desired installation height.
3. Chèn phích cắm tường: Cắm các nút chặn tường được cung cấp vào các lỗ đã khoan.
4. Đính kèm giá đỡ: Remove the knob from the bracket. Insert the screws to fix the bracket securely to the wall.
5. Ngọn núi Light: Tighten the knob to mount the solar light onto the bracket.
6. Điều chỉnh bảng điều khiển: Adjust the solar panel and light heads to achieve the best angle for sunlight exposure and illumination coverage. The light heads are adjustable up to 90 degrees.
7. Kích hoạt: Ensure the on/off switch on the back of the unit is in the "ON" position.

Image: A four-step visual guide demonstrating how to install the solar security light on a wall, including drilling, attaching the bracket, and mounting the light.

Hướng dẫn sử dụng

The Ensenior Solar Security Light features two motion sensors with a 180° detection angle and a range of up to 32.8 feet. It offers four lighting modes, selectable via the included remote control or the button on the light unit.

Chế độ chiếu sáng:

• Mode 1: Security Mode - Motion detection triggers 15 seconds of flashing, followed by 15 seconds of steady high brightness, then turns off.
• Chế độ 2: Chế độ cảm biến - Turns on high brightness when motion is detected and turns off approximately 30 seconds after motion ceases.
• Mode 3: Dim on + Sensor Mode (ECO) - Stays on at a dim brightness (10%) at night. When motion is detected, it switches to high brightness for 30 seconds, then returns to dim.
• Mode 4: 8H Always On Mode - The light stays on at a medium brightness (30%) for 8 hours after dark, regardless of motion.

To select a mode using the remote control, press the corresponding button. The light will illuminate for a few seconds to confirm the mode selection. The solar light will not turn on during daytime charging.

If the remote control battery is depleted or the remote is lost, you can cycle through the modes using the physical button on the light unit: Press once for Mode 1, twice for Mode 2, three times for Mode 3, four times for Mode 4, and five times to turn OFF.

Image: A visual guide detailing the four distinct operating modes (Security, Sensor, Dim on + Sensor, 8H Always On) of the Ensenior Solar Security Light.

Image: Instructions on how to switch between the four lighting modes using either the remote control or the manual button on the light unit.

BẢO TRÌ

• Sạc: For optimal performance, ensure the solar panel receives 6-8 hours of direct sunlight daily.
• Vệ sinh: Periodically clean the solar panel and LED surfaces with a soft, damp cloth to remove dust and debris, which can affect charging efficiency and light output.
• Chống thấm nước: The light is IP65 waterproof, designed to withstand rain, snowstorms, and other outdoor elements. However, avoid submerging the unit in water.
• Ắc quy: The unit contains a high-capacity 1800mAh battery. If the battery is fully depleted, it may require 2-3 days of charging to restore full functionality and mode settings.

Image: An infographic illustrating the solar charging duration and working times of the light under sunny, cloudy, and rainy weather conditions.

Image: The Ensenior solar light is depicted in various weather conditions (rain, snow, wind), emphasizing its IP65 waterproof and weather-resistant design.

Xử lý sự cố

Thông số kỹ thuật

Image: A detailed diagram illustrating the dimensions of the solar light and listing the included accessories: remote control, user manual, mounting screws, and wall plugs.

Bảo hành và Hỗ trợ

Your purchase includes a Bảo hành 3 năm. For any questions, concerns, or assistance, please contact Ensenior customer support. Refer to the contact information provided in the user manual included in your package or visit the official Ensenior store online.

Ensenior Direct is the seller and fulfills orders via Amazon. For direct support, please reach out to the seller through your Amazon order details.