1. Giới thiệu
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Sensor IP65, Model IR_OUT_GA. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image 1.1: The SEBSON Outdoor Motion Sensor IP65, a charcoal-colored unit designed for wall or ceiling mounting.
2. Hướng dẫn an toàn
- Việc lắp đặt phải được thực hiện bởi thợ điện có trình độ chuyên môn theo quy định về hệ thống điện địa phương.
- Đảm bảo nguồn điện bị ngắt trước khi lắp đặt hoặc bảo trì.
- Do not exceed the maximum load capacity specified in the technical data.
- This product is designed for outdoor use with IP65 protection; however, avoid direct high-pressure water jets.
- Để xa tầm tay trẻ em.
3. Nội dung gói hàng
Gói bao gồm:
- 1 x SEBSON IR Motion Sensor IP65
- Phụ kiện lắp đặt (ốc vít, tắc kê)
- Hướng dẫn sử dụng (tài liệu này)
4. Tính năng sản phẩm
The SEBSON Outdoor Motion Sensor IP65 is an infrared (IR) motion sensor designed for reliable outdoor use. Key features include:
- Gắn đa năng: Suitable for both wall and ceiling surface mounting.
- Phạm vi phát hiện rộng: Up to 24 meters with a 360° angle when ceiling-mounted, or 12 meters with a 180° angle when wall-mounted.
- Cài đặt có thể lập trình: Adjustable duty cycle (light duration), ambient brightness (LUX), and detection sensitivity.
- Chức năng xoay: The sensor head can be vertically swiveled by 180° for precise detection area adjustment.
- High Protection Class: IP65 rated for outdoor weather resistance.
- Đèn LED tương thích: Supports LED lighting up to 600W and incandescent lamps lên đến 1200W.
Hình 4.1: Hếtview of key features including detection range, power compatibility, IP rating, and adjustable settings.
Image 4.2: The sensor head can be swiveled vertically by 180 degrees to adjust the detection area.
5. Thiết lập và Cài đặt
5.1 Vị trí lắp đặt
Choose a suitable location for mounting the sensor. Consider the desired detection area and avoid placing it near heat sources, air conditioning units, or areas with frequent, unwanted movement (e.g., swaying branches) that could trigger false detections.
- Lắp đặt trần nhà: Provides a 360° detection angle with a range of 10m to 24m. Ideal for open areas.
- Lắp trên tường: Provides a 180° detection angle with a range of 5m to 12m. Suitable for pathways or specific directional coverage.
Hình ảnh 5.1: Ví dụample of the motion sensor installed on an outdoor wall.
Image 5.2: Detection range and angle variations for ceiling and wall installations.
5.2 Wiring (3-Wire Installation)
The sensor requires a 3-wire connection. Ensure the power supply is OFF before proceeding.
- Connect the Live (L) wire from the power supply to the Live input terminal on the sensor.
- Connect the Neutral (N) wire from the power supply to the Neutral input terminal on the sensor.
- Connect the Switched Live (L') output from the sensor to the Live input of your lighting fixture.
- Connect the Neutral (N) wire from the lighting fixture to the Neutral input terminal on the sensor (or directly to the main Neutral).
- Đảm bảo tất cả các kết nối đều an toàn và cách điện đúng cách.
Image 5.3: Base of the sensor showing wiring access points.
5.3 Cài đặt vật lý
- Mark the drilling points on the wall or ceiling using the sensor's base as a template.
- Khoan lỗ và lắp tắc kê nếu cần.
- Secure the sensor base to the mounting surface with screws.
- Perform wiring as described in section 5.2.
- Attach the sensor body to the base, ensuring a tight seal for IP65 protection.
- Adjust the sensor head to the desired angle using the swivel mechanism.
6. Operating Instructions and Adjustments
The SEBSON motion sensor features three adjustable settings to customize its operation:
Image 6.1: Adjustment dials for TIME, SENS (Sensitivity), and LUX (Ambient Brightness).
6.1 TIME (Switch-off Delay)
This dial adjusts how long the connected light remains ON after motion is no longer detected. The range is approximately 10 seconds to 15 minutes.
- Turn the dial clockwise to increase the duration.
- Turn the dial counter-clockwise to decrease the duration.
6.2 LUX (Ambient Brightness)
This dial determines the ambient light level at which the sensor will activate. The range is 0.1 LUX (darkness) to 2000 LUX (daylight).
- Set to the 'sun' symbol (max LUX) for activation during both day and night.
- Set to the 'moon' symbol (min LUX) for activation only in low light conditions or darkness.
- Adjust incrementally to find the desired activation threshold.
6.3 SENS (Sensitivity/Detection Range)
This dial adjusts the sensitivity of the motion detection, effectively controlling the detection range.
- Turn clockwise for maximum sensitivity and detection range.
- Turn counter-clockwise for minimum sensitivity and detection range.
- Adjust to prevent false triggers from distant objects or small animals.
7. Bảo trì
- Regularly clean the sensor lens with a soft, damp cloth to ensure optimal detection performance. Do not use abrasive cleaners.
- Check wiring connections periodically for any signs of wear or corrosion.
- Ensure the sensor is free from obstructions like spiderwebs, leaves, or snow, which can impair its function.
- No user-serviceable parts inside. Do not attempt to open the main housing.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Light does not turn ON when motion is detected. |
|
|
| Đèn vẫn BẬT liên tục. |
|
|
| Light turns ON without apparent motion (false triggers). |
|
|
9. Thông số kỹ thuật
| Số hiệu mẫu | IR_OUT_GA |
| Hoạt động Voltage | 220-240V xoay chiều 50Hz |
| Loại cài đặt | 3-wire, Surface-mounted (Wall/Ceiling) |
| Max. Power Consumption (Incandescent) | 1200W |
| Max. Power Consumption (LED/Energy-saving) | 600W |
| Tiêu thụ điện năng (Chế độ chờ) | 0.5W |
| Tốc độ phát hiện | 0.6 - 1.5 m/s |
| Detection Range (Ceiling Mount) | 10m - 24m (360°) |
| Detection Range (Wall Mount) | 5m - 12m (180°) |
| Ambient Brightness Adjustment | 0.1 - 2000 LUX |
| Lớp bảo vệ | IP65 |
| Switch-off Delay (Duty Cycle) | Min. 10s (±3s) - Max. 15 min (±2 min) |
| Nhiệt độ môi trường | -20 °C đến +40 °C |
| Độ ẩm | Độ ẩm tương đối <93% |
| Vertical Swivel Angle | 180° |
| Kích thước (D x R x C) | 121 x 83 x 83mm |
| Vật liệu | Nhựa |
| Màu sắc | than antraxit |
| Cân nặng | 175 gam |
Hình 9.1: Kích thước sản phẩm.
10. Bảo hành và Hỗ trợ
Để biết thông tin bảo hành và hỗ trợ kỹ thuật, vui lòng tham khảo tài liệu đi kèm khi mua hàng hoặc truy cập trang web chính thức của SEBSON. webtrang web. Giữ lại bằng chứng mua hàng để yêu cầu bảo hành.
