Ohniyou 48'' Fandelier Ceiling Fan with Light

1. Sản phẩm hếtview

The Ohniyou 48-inch Fandelier Ceiling Fan with Light (Model GLX120) combines the functionality of a ceiling fan with integrated LED lighting. Designed for both indoor and covered outdoor spaces, this unit offers versatile control and efficient air circulation.

• Điều khiển từ xa: Manage fan speed, light color, and timer settings conveniently.
• Sử dụng trong nhà / ngoài trời: Suitable for covered patios, kitchens, living rooms, and home offices.
• Động cơ DC đảo ngược: Provides cooling airflow in summer and helps circulate warm air in winter.
• Đèn LED có thể điều chỉnh: Features 3 color temperatures (3000K, 4500K, 6000K) with a memory function.
• Hoạt động yên tĩnh: Operates at noise levels below 35 dB for a peaceful environment.

2. Thiết lập và Cài đặt

Before beginning installation, ensure the power supply to the installation area is turned off at the circuit breaker. Professional installation is recommended.

2.1 Tháo hộp và kiểm tra linh kiện

Carefully unpack all components and verify against the parts list. If any parts are missing or damaged, contact customer support immediately.

2.2 Các bước lắp ráp

1. Lắp cánh quạt: Insert the 2-hole end of each fan blade into the motor and secure with screws.
2. Install Light Assembly: Remove three screw caps, tighten the screws securely, connect the LED light wire, then install the light cover retaining ring and light cover onto the motor.
3. Chuẩn bị thanh nối dài: Remove the cross pin and clamp pin from the downrod. Pass the wires through the middle of the downrod.
4. Gắn thanh nối dài vào động cơ: Loosen the screws on the motor port, secure the downrod to the motor port, and install both the cross pin and the clamp pin. Tighten the screws on the motor port.
5. Install Canopy and Coupling Cover: Thread the canopy and coupling cover through the downrod. Thread the downrod to the ball and tighten the screws.
6. Lắp đặt giá đỡ lắp đặt: Cố định giá đỡ lên trần nhà bằng vít.
7. Dây điện: Connect the ceiling wires to the receiver wires according to color codes.
8. Lắp ráp cuối cùng: Put the receiver and wires into the mounting bracket. Hang the downrod onto the mounting bracket. Finally, tighten the screws to secure the canopy.

2.3 Hướng dẫn video cài đặt

For a detailed visual guide on installation, please refer to the official installation video:

3. Hướng dẫn vận hành

The Ohniyou Fandelier Ceiling Fan is controlled via the included remote control. Ensure batteries are installed in the remote (2x AAA batteries, not included).

3.1 Chức năng điều khiển từ xa

• TẤT CẢ ĐỀU TẮT: Tắt cả quạt và đèn.
• BẬT / TẮT ÁNH SÁNG: Toggles the light on/off and cycles through color temperatures (3000K, 4500K, 6000K).
• Quạt BẬT/TẮT: Bật hoặc tắt quạt.
• Kiểm soát tốc độ (1-6): Điều chỉnh tốc độ quạt từ 1 (thấp nhất) đến 6 (cao nhất).
• Chế độ gió tự nhiên: Activates a random speed change feature to simulate a natural breeze.
• Hẹn giờ (1H/4H/8H): Thiết lập để quạt tự động tắt sau 1, 4 hoặc 8 giờ.
• Forward (F) / Reverse (R): Changes the direction of fan rotation for summer (downward airflow) or winter (upward airflow).
• Nút tắt tiếng: Turns the 'beeping' sound of the remote on/off.

3.2 Cài đặt tốc độ quạt

The fan features 6 speed levels, providing up to 6088 CFM airflow. Levels 1-2 offer a low, comfortable breeze, levels 3-4 provide a medium natural wind, and levels 5-6 deliver high cooling wind.

3.3 Tùy chọn chiếu sáng

The 36W LED light provides 2880 lumens and can be adjusted to three color temperatures: 3000K (Warm Light), 4500K (Natural Light), and 6000K (Cool Light). The light includes a memory function that recalls the last setting even after powering off.

3.4 Chức năng động cơ có thể đảo ngược

Use the 'F' button on the remote for summer mode (forward rotation, downward airflow for cooling) and the 'R' button for winter mode (reverse rotation, upward airflow to circulate warm air).

4. Bảo trì

Bảo trì thường xuyên sẽ đảm bảo hiệu suất tối ưu và tuổi thọ của quạt trần.

• Vệ sinh: Periodically clean the fan blades and light cover with a soft, damp cloth. Avoid using abrasive cleaners that may damage the finish.
• Siết chặt các ốc vít: Check all screws and fasteners on the mounting bracket and fan assembly annually. Ensure they are securely tightened.
• Cân bằng lưỡi dao: If the fan wobbles, check that all blades are securely attached and balanced. A blade balancing kit (not included) can be used if necessary.
• Kết nối điện: Ensure all electrical connections remain secure. If you are unsure, consult a qualified electrician.

KHAI THÁC. Xử lý sự cố

This section addresses common issues you might encounter with your Ohniyou Fandelier Ceiling Fan.

5.1 Điều khiển từ xa không hoạt động

• Kiểm tra pin: Ensure the remote control has fresh AAA batteries and they are inserted correctly.
• Ghép nối lại điều khiển từ xa: If the remote is unresponsive, it may need to be re-paired with the fan.

How to Re-pair the Remote Control:

1. Use the wall switch or another method to cut off power to the fan.
2. Chờ 5 giây.
3. Kết nối lại nguồn điện.
4. Within three seconds of reconnecting power, long-press the 'pair' button on the remote. You will hear a "beeping beeping" sound, indicating successful pairing.

5.2 Fan Not Operating / Light Not Turning On

• Nguồn điện: Ensure the main power supply to the fan is on.
• Dây điện: Check all electrical connections to ensure they are secure and correctly wired. If unsure, consult a qualified electrician.
• Ghép nối từ xa: If the remote is not paired, the fan and light may not respond. Follow the re-pairing steps above.

5.3 Excessive Noise or Wobbling

• Siết chặt các ốc vít: Ensure all screws on the motor housing, blade attachments, and mounting bracket are tight.
• Cân bằng lưỡi dao: Check if fan blades are balanced. Minor wobbling can sometimes be corrected with a blade balancing kit.
• Lắp đặt: Verify the mounting bracket is securely fastened to a sturdy ceiling joist or outlet box rated for fan support.

6. Thông số kỹ thuật

7. Bảo hành và Hỗ trợ

Ohniyou is committed to providing quality products and customer satisfaction. If you encounter any issues or have questions, please contact our support team.

7.1 Các bộ phận bị thiếu

If your product is missing any parts upon arrival, please do not worry. We will reissue the necessary parts.

7.2 Thông tin liên hệ

Please feel free to contact us via email for any inquiries or support needs:

E-mail: ohniyou@ledphy.com

Chúng tôi sẽ cố gắng trả lời trong vòng 12 giờ.