1. Hướng dẫn an toàn quan trọng
Vui lòng đọc kỹ và hiểu rõ tất cả hướng dẫn trước khi lắp đặt hoặc vận hành sản phẩm này. Việc không tuân thủ các hướng dẫn này có thể dẫn đến điện giật, hỏa hoạn hoặc các nguy cơ khác có thể gây hư hỏng tài sản hoặc thương tích cá nhân.
- Luôn ngắt nguồn điện tại cầu dao hoặc hộp cầu chì trước khi lắp đặt hoặc bảo dưỡng.
- Sản phẩm này phải được lắp đặt theo đúng quy định lắp đặt hiện hành bởi người am hiểu về cấu tạo, vận hành sản phẩm cũng như các mối nguy hiểm liên quan.
- Use only UL-listed wire connectors for connections.
- Đảm bảo tất cả các kết nối đều an toàn và cách điện đúng cách.
- Không lắp đặt gần vật liệu dễ cháy.
- This fixture is designed for outdoor use and is rated for wet locations.
2. Sản phẩm hếtview
The OREiN Motion Sensor Outdoor Light is a smart flood light designed to provide efficient and responsive illumination for outdoor spaces. It features an integrated motion sensor for automatic activation and can be controlled via smart features for enhanced functionality.

Hình 2.1: Tổng quan view of the OREiN Motion Sensor Outdoor Light. This image shows the overall design of the flood light, including the main light housing and the integrated motion sensor at the bottom.
3. Nội dung gói hàng
Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt:
- OREiN Motion Sensor Outdoor Light Fixture
- Lắp khung
- Vít lắp và neo tường
- Wire Nuts / Connectors
- Hướng dẫn sử dụng (tài liệu này)
4. Thiết lập và Cài đặt
4.1 Trước khi bạn bắt đầu
- Turn off power at the circuit breaker or fuse box to the outlet box where the light will be installed.
- Hãy đảm bảo bề mặt lắp đặt ổn định và có thể chịu được trọng lượng của thiết bị.
- Chuẩn bị các dụng cụ cần thiết: tua vít, kìm tuốt dây, máy khoan (nếu cần).
4.2 Lắp đèn
- Gắn giá đỡ vào hộp nối bằng các vít được cung cấp. Đảm bảo giá đỡ được gắn chặt.
- Connect the household wires to the fixture wires: black to black (live), white to white (neutral), and green/bare copper to green (ground). Secure connections with wire nuts.
- Cẩn thận nhét dây vào hộp nối.
- Align the fixture with the mounting bracket and secure it with the provided screws.
- Bôi keo silicone xung quanh các cạnh của thiết bị nơi tiếp xúc với bề mặt lắp đặt để ngăn nước xâm nhập.
4.3 Sơ đồ đấu dây
Connect the black wire from the fixture to the black (live) wire from the household circuit. Connect the white wire from the fixture to the white (neutral) wire from the household circuit. Connect the green or bare copper ground wire from the fixture to the ground wire from the household circuit. Ensure all connections are tight and insulated.
5. Hướng dẫn vận hành
5.1 Bật nguồn
Once installation is complete, restore power at the circuit breaker. The light may cycle on and off once as it performs a self-test.
5.2 Điều chỉnh cảm biến chuyển động
The motion sensor can be adjusted for sensitivity and duration. Locate the adjustment dials or buttons on the sensor head.
- SENS (Độ nhạy): Adjusts the detection range of the motion sensor. Turn clockwise for higher sensitivity (longer range), counter-clockwise for lower sensitivity (shorter range).
- TIME (Duration): Sets how long the light stays on after motion is detected. Adjust to your desired duration (e.g., 30 seconds to 10 minutes).
- LUX (Dusk-to-Dawn): Determines the ambient light level at which the sensor becomes active. Turn towards the sun icon for daylight operation (test mode) or towards the moon icon for night-only operation.
5.3 Smart Features / App Control
For smart control features, download the OREiN Smart Home app from your device's app store. Follow the in-app instructions to pair your flood light with your Wi-Fi network. This will allow for remote control, scheduling, and advanced customization of light settings.
6. Bảo trì
Regular maintenance ensures optimal performance and longevity of your OREiN Motion Sensor Outdoor Light.
- Vệ sinh: Periodically clean the lens and sensor with a soft, damp cloth to remove dirt, dust, or debris that may obstruct the sensor or reduce light output. Do not use abrasive cleaners.
- Điều tra: Annually inspect the fixture for any signs of damage, loose wiring, or corrosion. Ensure mounting screws are tight.
- Chu kỳ nguồn điện: If the light behaves erratically, try turning off the power at the circuit breaker for 30 seconds and then restoring it.
KHAI THÁC. Xử lý sự cố
Tham khảo bảng dưới đây để biết các vấn đề thường gặp và giải pháp.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đèn không bật. | No power; faulty wiring; sensor setting too high (LUX); bulb failure (if applicable). | Check circuit breaker; verify wiring connections; adjust LUX setting; contact support if integrated LED. |
| Đèn sáng liên tục. | Continuous motion detected; TIME setting too long; LUX setting too low (daylight operation). | Clear obstruction; adjust TIME setting; adjust LUX setting. |
| Cảm biến chuyển động không phát hiện được. | SENS setting too low; obstruction on sensor lens; sensor angle incorrect. | Increase SENS setting; clean sensor lens; adjust sensor angle. |
| Ánh sáng nhấp nháy. | Loose wiring connection; unstable power supply. | Check and secure all wiring; consult an electrician for power supply issues. |
8. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Số hiệu mẫu | B0DZX3J993 |
| Thương hiệu | OREiN |
| Đầu vào nguồn điện | 120V AC 60Hz |
| Cái gì?tage | Approx. 30W (LED Integrated) |
| Đầu ra Lumen | Khoảng 3000 Lumens |
| Nhiệt độ màu | Ánh sáng ban ngày 5000K Trắng |
| Phạm vi phát hiện chuyển động | Lên đến 70 ft (21 m) |
| Góc phát hiện | 180 độ |
| Xếp hạng IP | IP65 (Chống bụi, chống tia nước) |
| Nhiệt độ hoạt động | -20°C đến 40°C (-4°F đến 104°F) |
| Ngày đầu tiên có sẵn | Ngày 11 tháng 2023 năm XNUMX |
9. Bảo hành và Hỗ trợ
OREiN products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please refer to the product packaging or the official OREiN webtrang web để biết các điều khoản và điều kiện bảo hành cụ thể.
For technical support, troubleshooting assistance, or warranty claims, please contact OREiN customer service:
- E-mail: support@orein.com (Bán tạiample email, please refer to actual product for contact details)
- Webđịa điểm: www.orein.com (Bán tạiample website, please refer to actual product for contact details)
When contacting support, please have your product model number (B0DZX3J993) and purchase date available.





