PRORECK StagHướng dẫn sử dụng hệ thống loa PA e Pro 12

Giới thiệu

Thank you for choosing the PRORECK Stage Pro 12 PA Speaker System. This powerful audio system is designed to deliver exceptional sound quality for various events, including DJ performances, weddings, meetings, and live events. With its 8000W peak power, dual 12" subwoofers, four line array speakers, and versatile DSP presets, the Stage Pro 12 offers a comprehensive solution for your audio needs. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your system.

Các tính năng chính bao gồm:

• 8000W Powerful Sound System: Experience unmatched audio performance with 8000W peak power and 1200W RMS for crystal-clear, high-quality sound.
• 4x Line Array Speakers + 2x 12" Subwoofer: Provides a perfect balance of crisp highs, rich mids, and deep bass.
• 3 DSP Presets: Optimize audio output with STANDARD, DJ, and LIVE presets for different occasions.
• TWS Bluetooth for Wireless Connectivity: Stream music wirelessly and connect two Stage Pro 12 speakers for enhanced stereo sound.
• Versatile and Professional-Grade: Ideal for DJs, musicians, and event organizers.

Thông tin an toàn

Vui lòng đọc và hiểu tất cả các hướng dẫn an toàn trước khi sử dụng sản phẩm này. Việc không tuân thủ các hướng dẫn này có thể dẫn đến điện giật, hỏa hoạn hoặc thương tích nghiêm trọng.

• Nguồn điện: Connect the system only to a power supply of the type described in this manual or marked on the unit. Ensure the voltage switch is set correctly for your region (AC 120V or AC 240V).
• Thông gió: Không chặn bất kỳ lỗ thông gió nào. Lắp đặt theo hướng dẫn của nhà sản xuất.
• Nước và độ ẩm: Không để thiết bị này tiếp xúc với mưa hoặc hơi ẩm. Không sử dụng gần nước.
• Nhiệt: Không lắp đặt gần bất kỳ nguồn nhiệt nào như bộ tản nhiệt, thanh nhiệt, bếp lò hoặc các thiết bị khác (bao gồm amplò phản ứng) tạo ra nhiệt.
• Tiếp đất: Sản phẩm này phải được nối đất. Không được làm mất tác dụng an toàn của phích cắm phân cực hoặc phích cắm nối đất.
• Bảo dưỡng: Đừng cố gắng tự bảo dưỡng sản phẩm này. Giới thiệu tất cả các dịch vụ cho nhân viên dịch vụ có trình độ.
• Xử lý: Use caution when moving the system to prevent injury or damage.

Có gì trong hộp

Upon unpacking, please verify that all components listed below are present and in good condition. If any items are missing or damaged, contact PRORECK customer support immediately.

Image: All components of the PRORECK Stage Pro 12 system, including the two 12-inch subwoofers, four line array speakers, power cable, and speaker cables.

• 2 x 12" Subwoofer Units
• 4 x Line Array Speaker Units
• 1 x Cáp nguồn
• Speaker Cables (for connecting line array speakers to subwoofers and subwoofers to each other)

Note: The system is typically shipped in three separate packages.

Image: The three distinct packages (Stage Pro 12Y, 12W, 12X) in which the PRORECK Stage Pro 12 system is shipped.

Sản phẩm trênview: Bảng điều khiển

Familiarize yourself with the control panel located on the rear of the subwoofer unit. Understanding these controls is crucial for proper operation.

Hình ảnh: Cận cảnh view of the main control panel on the PRORECK Stage Pro 12 subwoofer, showing all inputs, outputs, and control knobs with corresponding labels.

1. CẤP ĐỘ SUB: Adjusts the output volume of the subwoofer.
2. SATELLITE LEVEL: Adjusts the output volume of the line array speakers.
3. XLR/TRS COMBO INPUT: Input for audio sources using XLR or 1/4" TRS cables (Left and Right channels).
4. XLR LINK OUTPUT: Output for linking to another speaker system or mixer.
5. DSP PRESETS: Selects between STANDARD, DJ, and LIVE sound modes.
6. BLUETOOTH/TWS SWITCH: Activates Bluetooth pairing mode or True Wireless Stereo (TWS) linking.
7. SATELLITE POWER OUTPUT: Connects to the line array speakers.
8. ĐĂNG KÝ ĐẦU RA: Connects to the second subwoofer unit.
9. TẬPTAGE SWITCH: Selects between AC 120V and AC 240V power input. Ensure this matches your local power supply.
10. CÔNG TẮC ĐIỆN: Turns the system ON or OFF.
11. MAIN POWER INPUT: Connects the system to the main power supply using the provided power cable.

Cài đặt

1. Lắp ráp hệ thống

The PRORECK Stage Pro 12 system is designed for easy assembly. Follow these steps to set up your speakers:

• Place the two 12" subwoofer units on a stable, flat surface. The bottom subwoofer should be placed first, followed by the second subwoofer stacked directly on top.
• Carefully place the four line array speaker units on top of the upper subwoofer. Ensure they are securely connected using the integrated connecting pieces for stability.

Image: The complete PRORECK Stage Pro 12 system fully assembled, showing the two subwoofers at the base and the four line array speakers stacked vertically above them.

2. Kết nối điện

• Kết nối nguồn điện: Before connecting to power, ensure the TẬPTAGE CHUYỂN ĐỔI (9) on the control panel is set to match your local power supply (AC 120V or AC 240V). Connect the provided power cable to the ĐẦU VÀO ĐIỆN CHÍNH (11) on the subwoofer and then to a grounded electrical outlet.
• Kết nối loa siêu trầm: Use a speaker cable to connect the ĐĂNG KÝ ĐẦU RA (8) of the primary subwoofer to the input of the second subwoofer unit.
• Line Array Speaker Connection: Connect the line array speakers to the SATELLITE POWER OUTPUT (7) on the primary subwoofer using the appropriate speaker cables. Ensure all four line array speakers are daisy-chained or connected as per the system's design.

Image: The rear panel of the PRORECK Stage Pro 12 system, illustrating the correct cable connections for power, linking subwoofers, and connecting the line array speakers.

3. Kết nối nguồn âm thanh

• Connect your audio source (mixer, microphone, instrument, etc.) to the XLR/TRS COMBO INPUT (3) on the control panel. Use either XLR or 1/4" TRS cables.
• For linking to another speaker system or recording device, use the XLR LINK OUTPUT (4).

Hướng dẫn sử dụng

1. Bật / Tắt nguồn

• Đảm bảo tất cả các kết nối đều an toàn trước khi bật nguồn.
• Quay lại CẤP ĐỘ SUB (1) và CẤP VỆ TINH (2) knobs to their minimum positions.
• Lật ngược CÔNG TẮC ĐIỆN (10) to the "ON" position. The power indicator light will illuminate.
• To power off, turn the level knobs to minimum, then flip the CÔNG TẮC ĐIỆN (10) to "OFF".

2. Điều chỉnh mức âm lượng

• Sử dụng CẤP ĐỘ SUB (1) knob to control the volume of the subwoofer.
• Sử dụng CẤP VỆ TINH (2) knob to control the volume of the line array speakers.
• Adjust both levels to achieve a balanced sound for your environment.

3. DSP Presets

Những Stage Pro 12 features three Digital Signal Processing (DSP) presets to optimize sound for different applications:

• TIÊU CHUẨN: General purpose setting for balanced audio reproduction.
• Nhạc sĩ: Enhanced bass and treble for music playback, ideal for parties and events.
• SỐNG: Optimized for live vocals and instruments, providing clarity and presence.

Sử dụng TÀI LIỆU DSP (5) switch to cycle through these modes and select the one best suited for your current use.

4. Bluetooth and TWS Connectivity

• Ghép nối Bluetooth: Lật ngược BLUETOOTH/TWS SWITCH (6) to the Bluetooth position. The Bluetooth indicator light will flash, indicating it's ready for pairing. On your smartphone, tablet, or laptop, search for "PRORECK Stage Pro 12" in your Bluetooth settings and connect. Once paired, the light will become solid.
• Âm thanh nổi không dây đích thực (TWS): To connect two Stage Pro 12 systems for stereo sound, ensure both units are powered on and in Bluetooth mode. On one unit, press and hold the BLUETOOTH/TWS SWITCH (6) until the TWS indicator light flashes. The two units will automatically pair, and audio will be split into left and right channels for a wider soundstage.

BẢO TRÌ

Proper maintenance ensures the longevity and optimal performance of your PRORECK Stage Pro 12 system.

• Vệ sinh: Use a soft, dry cloth to clean the exterior surfaces of the speakers. Do not use abrasive cleaners, waxes, or solvents. For stubborn dirt, a slightly damp có thể sử dụng vải, sau đó là vải khô.
• Thông gió: Kiểm tra thường xuyên các lỗ thông gió để đảm bảo không có bụi và mảnh vụn để tránh quá nhiệt.
• Kho: When not in use for extended periods, store the system in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for storage and transport.
• Chăm sóc cáp: Inspect all cables regularly for signs of wear or damage. Replace any damaged cables immediately to prevent electrical hazards or signal loss.

Xử lý sự cố

If you encounter issues with your PRORECK Stage Pro 12 system, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact PRORECK customer support for further assistance.

Thông số kỹ thuật

Detailed technical specifications for the PRORECK Stage Pro 12 PA Speaker System:

Image: Detailed dimensional drawing of the PRORECK Stage Pro 12 system, providing measurements for the overall height, and individual dimensions for the subwoofers and line array speakers.

Bảo hành

The PRORECK Stage Pro 12 PA Speaker System comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Retain your proof of purchase for warranty claims.

Ủng hộ

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact PRORECK customer support. You can find more information and contact details on the official PRORECK website or through the PRORECK Store on Amazon.

Ghé thăm PRORECK Store để biết thêm thông tin về sản phẩm và tài nguyên hỗ trợ.