1. Giới thiệu
The Firecore FRL300R Rotary Laser Level Kit is a professional-grade tool designed for a wide range of construction and leveling applications. This self-leveling horizontal rotary laser provides precise elevation control over large areas, enhancing productivity for tasks such as grading, excavating, patio decks, terraces, swimming pools, landscaping, and septic systems. Its robust design ensures durability and reliability in demanding jobsite environments.
Figure 1: The Firecore FRL300R Rotary Laser Level Kit, including the main unit, receiver, and hard carrying case.
2. Thông tin an toàn
Always read and understand all safety warnings and instructions before operating the Firecore FRL300R Rotary Laser Level. Failure to follow these instructions may result in serious injury.
2.1 An toàn Laser
This product emits a Class 2 laser beam (IEC/EN60825-1/2014 <1mW). Observe the following precautions:
- KHÔNG ĐƯỢC Nhìn thẳng vào chùm tia laser.
- KHÔNG ĐƯỢC Cố ý chiếu tia laser vào người khác hoặc các bề mặt phản chiếu.
- Always use the provided red laser glasses to enhance visibility and protect your eyes when working with the laser.
- Ensure the laser is positioned so that the beam is above or below eye level whenever possible.
2.2 An toàn pin
- Use only the specified Li-ion battery and charging accessories provided with the kit.
- Không để pin tiếp xúc với nhiệt độ quá cao, ánh nắng trực tiếp hoặc lửa.
- Không tháo rời, nghiền nát hoặc đâm thủng pin.
- Bỏ pin theo quy định của địa phương.
3. Nội dung gói hàng
Verify that all items listed below are included in your Firecore FRL300R Rotary Laser Level Kit:
- 1x FRL300R Rotary Laser
- 1x Điều khiển từ xa
- 1x Red Laser Glasses
- 1x Li-ion Battery with Type-C Charging Port
- Bộ chuyển đổi 1x 5V / 1A
- 1x Cáp sạc
- 1x Red Target Plate
- 1x Receiver with a Clamp
- 1x Hướng dẫn sử dụng
- 1 hộp đựng cứng
Figure 2: All included components of the FRL300R kit.
4. Thiết lập
4.1 Sạc pin
The FRL300R is powered by a rechargeable Li-ion battery. Before first use, fully charge the battery. Connect the provided charging cable to the Type-C charging port on the laser level and plug the 5V/1A adapter into a power outlet. A full charge provides up to 15 hours of working time.
Figure 3: The FRL300R supports multiple charging methods via its Type-C port.
4.2 Initial Placement and Mounting
Place the FRL300R on a stable, level surface or mount it securely onto a tripod. Ensure the area is clear of obstructions that might interfere with the laser beam. The unit is designed with a robust 4-handle ergonomic design for easy handling.
Figure 4: The FRL300R features a robust 4-handle ergonomic design for secure handling.
5. Hướng dẫn vận hành
5.1 Khởi động và Tự cân bằng
Press the power button to turn on the FRL300R. The unit features electronic horizontal self-leveling, automatically leveling itself within 5° in approximately 15 seconds. If the device is disturbed during operation, it will automatically re-level. The self-leveling motors are accurate to ±10 seconds.
Hình 5: Cận cảnh view of the FRL300R in operation, showing the emitted red laser beam.
5.2 Adjusting Rotation Speed and Scanning Angle
The FRL300R offers variable rotation speeds (0-300-600rpm) and scanning angle options (0°-10°-45°-90°-180°-0°). Use the controls on the unit or the remote control to adjust these settings according to your application needs.
Figure 6: The remote control allows for convenient adjustment of laser settings.
5.3 Vibrate Mode
For use in windy or vibrating conditions, activate the vibrate mode. In this mode, the self-leveling function is deactivated, and the laser cross is locked, allowing the device to be used at any angle without constant re-leveling due to minor disturbances.
5.4 Sử dụng bộ thu
The included laser receiver extends the working range and improves visibility in bright conditions. It can be used in a handheld position or mounted on a rod using the provided clamp. The receiver is IP55 waterproof and dustproof, ensuring reliable performance in various environments.
Figure 7: The FRL300R in use with its receiver and a measuring rod on a construction site.
Figure 8: The FRL300R positioned on a tripod, demonstrating its use for long-range leveling tasks.
6. Bảo trì
Proper maintenance ensures the longevity and accuracy of your Firecore FRL300R Rotary Laser Level.
6.1 Vệ sinh
Lau thiết bị bằng vải mềm, damp Không sử dụng hóa chất mạnh hoặc chất tẩy rửa có tính mài mòn. Giữ cho cửa sổ đầu ra laser luôn sạch sẽ để đảm bảo độ rõ nét tối ưu của chùm tia.
6.2 Lưu trữ
When not in use, store the FRL300R and its accessories in the provided hard carrying case. Store in a dry place, away from direct sunlight and extreme temperatures.
6.3 Độ bền và khả năng bảo vệ
The FRL300R is designed to be tough and impact-resistant, with an IP55 rating for water and dust resistance. It can withstand drops from a height of 1m (3.3 ft.) onto concrete surfaces. While rugged, always handle the device with care to maintain its precision.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your FRL300R, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Laser không bật | Pin yếu hoặc cạn kiệt | Charge the Li-ion battery fully. |
| Laser does not self-level | Unit is outside of ±5° self-leveling range | Place the unit on a more level surface or adjust tripod. |
| Các bài đọc không chính xác | Unit disturbed during operation; Calibration needed | Allow unit to re-level; If persistent, contact support for calibration. |
| Tia laser không nhìn thấy được | Too much ambient light; Long distance | Use the laser receiver; Use red laser glasses; Work in lower light conditions if possible. |
8. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Người mẫu | FRL300R |
| Lớp Laser | Class 2 (IEC/EN60825-1/2014) <1mW |
| Sự chính xác | ±1/8" at 100ft |
| Working Range (Diameter) | 600m (1,969 ft.) with receiver |
| Phạm vi tự san lấp mặt bằng | ±5° |
| Thời gian tự san lấp mặt bằng | Trong vòng 15 giây |
| Tốc độ quay | 0, 300, 600 vòng / phút |
| Góc quét | 0°, 10°, 45°, 90°, 180° |
| Xếp hạng IP | IP55 (Chống nước và bụi) |
| Sức đề kháng khi rơi | 1m (3.3 ft.) onto concrete |
| Loại pin | Li-ion (có thể sạc lại) |
| Thời gian hoạt động | Lên đến 15 giờ |
| Trọng lượng sản phẩm | 9.2 pound |
| Vật liệu | Acrylonitrile Butadiene Styren |
9. Bảo hành và Hỗ trợ
9.1 Thông tin bảo hành
Firecore laser levels are covered by a ONE-YEAR warranty kể từ ngày mua. Bảo hành này bao gồm các lỗi về vật liệu và tay nghề trong quá trình sử dụng bình thường.
9.2 Hỗ trợ khách hàng
For any product questions, technical assistance, or warranty claims, please do not hesitate to contact Firecore customer support. We are committed to responding to your inquiry within 24 hours.
Please refer to the contact information provided in your purchase documentation or visit the official Firecore webtrang web để biết chi tiết hỗ trợ.
