Dyson Car+Boat Handheld Vacuum Instruction Manual

Sản phẩm trênview

The Dyson Car+Boat cordless handheld vacuum is engineered for powerful and versatile cleaning of hard surfaces, upholstery, and tight spaces in your home, car, or boat. It features 115AW suction power, two power modes, and up to 50 minutes of fade-free run time. The advanced filtration system captures 99.99% of particles as small as 0.3 microns, expelling cleaner air.

Các tính năng chính

• The most powerful handheld vacuum.
• Up to 50 minutes of fade-free suction power and two power modes.
• Deep clean fabric with the Mini Motorized tool, designed to remove allergens and pet hair.
• Quickly switch between tasks with the Combination tool, using the wide nozzle for general cleaning and the brush for gentle dusting.
• Easily tackle dust and dirt in hard-to-reach places with the Crevice tool, reaching up to seven inches into tight, narrow spaces.
• Expels cleaner air through advanced whole-machine filtration, trapping 99.99% of particles as small as 0.3 microns.
• Constructed from strong, durable, and lightweight materials.

Nội dung gói

Your Dyson Car+Boat Handheld Vacuum package includes the following components:

• Dyson Car+Boat Handheld Vacuum unit
• Bộ sạc
• Mini Motorized tool
• Công cụ kết hợp
• Dụng cụ khe hở

This image displays the main Dyson Car+Boat handheld vacuum unit along with its charger, mini motorized tool, combination tool, and crevice tool.

Cài đặt

Sạc chân không

Before first use, fully charge your Dyson Car+Boat handheld vacuum.

1. Kết nối bộ sạc vào ổ cắm điện.
2. Plug the charging cable into the charging port located on the vacuum's base.
3. The blue indicator light on the base will illuminate to show charging status.
4. Thông thường, quá trình sạc đầy pin mất vài giờ.

The image shows the Dyson Car+Boat handheld vacuum resting on its charging base, plugged into a wall outlet. A blue light indicates that the unit is currently charging.

Công cụ đính kèm

The included tools can be easily attached and detached to suit your cleaning needs.

1. To attach a tool, align it with the main vacuum unit's nozzle and push until it clicks securely into place.
2. To detach a tool, press the red release button on the tool and pull it away from the main unit.

This image illustrates the process of attaching a cleaning tool, specifically the crevice tool, to the main body of the Dyson Car+Boat handheld vacuum.

Vận hành máy hút bụi

Chế độ nguồn

The vacuum features two power modes for different cleaning tasks:

• Chế độ chuẩn: Provides up to 50 minutes of fade-free suction for everyday cleaning.
• Chế độ tối đa: Offers increased suction power for tougher dirt and debris, with a shorter run time.

To switch between modes, use the slider switch located on the top of the main unit.

Sử dụng các công cụ

• Dụng cụ cơ giới mini: Ideal for deep cleaning upholstery, pet beds, and car seats to remove pet hair and allergens.
• Công cụ kết hợp: Features a wide nozzle for general cleaning and a brush for delicate surfaces or dusting.
• Dụng cụ khe hở: Designed for reaching into narrow gaps, corners, and tight spaces in vehicles or furniture.

A Dyson Car+Boat handheld vacuum, equipped with the crevice tool, is shown effectively cleaning debris from between car seats.

The Dyson Car+Boat handheld vacuum, fitted with the combination tool, is used to clean crumbs and debris from a table surface.

This image shows the Dyson Car+Boat handheld vacuum with its crevice tool reaching into the tight corner of a staircase to remove dust and dirt.

BẢO TRÌ

Dọn sạch Thùng rác

Empty the clear bin when debris reaches the MAX mark.

1. Giữ máy hút bụi phía trên thùng rác.
2. Push the red lever on the main unit upwards until the bin base opens and debris is released.
3. Push the bin base back up until it clicks securely into place.

The image demonstrates how to empty the clear bin of the Dyson Car+Boat handheld vacuum by pushing a red lever, allowing collected debris to fall into a trash receptacle.

Rửa bộ lọc

The filter should be washed regularly (at least once a month) to maintain optimal suction.

1. Twist the filter counter-clockwise from the top of the main unit and pull it out.
2. Rửa bộ lọc dưới vòi nước lạnh cho đến khi nước trong.
3. Bóp và xoay bộ lọc để loại bỏ nước thừa.
4. Leave the filter to dry completely for at least 24 hours in a warm, dry place before reattaching. Do not use a tumble dryer or microwave.

This image shows a hand detaching the purple filter from the top section of the Dyson Car+Boat handheld vacuum, preparing it for cleaning.

Cleaning the Mini Motorized Tool Brush Bar

Periodically check the brush bar for tangled hair or debris and remove it to ensure effective cleaning.

Xử lý sự cố

No Power / Not Charging

• Ensure the charger is securely plugged into both the wall outlet and the vacuum's charging port.
• Check the power outlet by plugging in another appliance.
• Allow the vacuum to cool down if it has been used extensively, as it may have a thermal cut-out.

Giảm hút

• Check if the clear bin is full and empty it if necessary.
• Ensure the filter is clean and dry. Wash and dry it if it's dirty or damp.
• Check for blockages in the tools or the main unit's intake.
• Hãy đảm bảo tất cả các phụ kiện được lắp đặt chắc chắn.

Tools Not Attaching/Detaching Smoothly

• Ensure the red release button is fully pressed when detaching.
• Align the tool correctly with the main unit until a click is heard when attaching.

Thông số kỹ thuật

Bảo hành và Hỗ trợ

The Dyson Car+Boat Handheld Vacuum comes with a 2-year limited warranty. Register your machine on the MyDyson™ app for personalized machine guides, maintenance, and support. For further assistance, please contact Dyson customer support.