Giới thiệu
The Fimco LG-65-HP 65-Gallon Spot Sprayer is engineered for efficient and versatile application of liquids in various settings, including garden care, pest control, weed management, and the distribution of chemicals or fertilizers. Its robust design and high-performance components ensure reliable operation for both residential and light commercial use. This manual provides essential information for the safe and effective setup, operation, and maintenance of your Fimco spot sprayer.
Thông tin an toàn
Always prioritize safety when operating the sprayer. Failure to follow these guidelines may result in personal injury or damage to the equipment.
- Xử lý hóa chất: Handle all chemicals safely. Always read and follow the instructions and safety warnings provided by the chemical manufacturer.
- Thiết bị bảo vệ cá nhân (PPE): Wear appropriate protective gear, including eye protection, gloves, and suitable clothing, to prevent contact with sprayed materials.
- Thông gió: Use the sprayer in well-ventilated areas to avoid inhaling chemical fumes.
- Xử lý: Dispose of unused chemicals and rinse water properly according to local regulations and chemical manufacturer guidelines.
- An toàn điện: Ensure all electrical connections to the 12V pump are secure and free from corrosion. Do not operate the pump if wiring is damaged.
- Sự ổn định: Ensure the sprayer tank is securely mounted or placed on a stable, level surface before filling or operating to prevent tipping.
- Trẻ em và vật nuôi: Keep children and pets away from the sprayer and spraying area during operation and while chemicals are present.
Thành phần hếtview
The Fimco LG-65-HP Spot Sprayer includes several key components designed for optimal performance and ease of use.

Một chi phí chung view of the Fimco LG-65-HP 65-gallon spot sprayer. The white polyethylene tank is visible, with the black 22-inch Pro Series spray wand, coiled 25-foot hose, and pressure gauge mounted on top. The pump assembly is also visible near the front of the tank.
Các thành phần bao gồm:
- 65-Gallon Polyethylene Tank: Durable, UV-resistant tank designed for chemical compatibility and longevity. Features a 5-inch tethered lid for easy access and draining.
- 12-Volt High Flo High Performance Pump: Provides a maximum flow rate of 4.5 GPM and a maximum pressure of 60 psi for consistent spray.
- 22-inch Pro Series Spray Wand: Equipped with an adjustable spray pattern tip and trigger, capable of up to 38 feet horizontal and 27 feet vertical spray.
- 25 feet of 3/8 inch Hose: Cung cấp ampcó thể thực hiện nhiều nhiệm vụ phun khác nhau.
- Pressure Control Manifold: Allows for fine-tuning of the spray pattern and pressure.
Hướng dẫn thiết lập
Proper setup is crucial for the safe and effective operation of your sprayer.
1. Mở gói và kiểm tra:
- Cẩn thận loại bỏ tất cả các thành phần khỏi bao bì.
- Inspect all parts for any signs of damage during shipping. Contact your retailer immediately if any damage is found.
- Đảm bảo tất cả các thành phần được liệt kê đều có mặt.
2. Gắn và bố trí:
- The sprayer is compatible with UTVs and pickup beds. Securely mount the tank using appropriate straps or fasteners to prevent movement during transport and operation.
- If using as a stationary unit, place it on a firm, level surface.
3. Kết nối điện:
- Connect the 12V pump's power leads to a compatible 12-volt power source (e.g., vehicle battery).
- Ensure the positive (+) lead is connected to the positive terminal and the negative (-) lead to the negative terminal.
- Verify connections are tight and free from corrosion.
4. Hose and Wand Connection:
- Connect the 25-foot hose to the pump outlet and the 22-inch Pro Series spray wand.
- Đảm bảo tất cả các kết nối được siết chặt bằng tay để tránh rò rỉ.
Hướng dẫn sử dụng
Follow these steps for effective and safe operation of your Fimco spot sprayer.
1. Đổ đầy bình:
- Ensure the sprayer is on a level surface.
- Remove the 5-inch tethered lid.
- Carefully pour the desired liquid (water, chemical mixture) into the tank. Do not overfill.
- Đậy nắp lại một cách an toàn.
2. Danh sách kiểm tra trước khi vận hành:
- Verify all hose connections are secure.
- Check the 12V power connection.
- Ensure the spray area is clear of unintended targets.
3. Spraying Procedure:
- Turn on the 12V pump. The pump will begin to build pressure.
- Hướng vòi phun vào khu vực cần xử lý.
- Depress the trigger on the spray wand to begin spraying.
- Nhả cò để ngừng phun.
4. Adjusting Spray Pattern and Pressure:
- The 22-inch Pro Series spray wand features an adjustable tip. Rotate the tip to change the spray pattern from a fine mist to a solid stream.
- Use the pressure control manifold to fine-tune the operating pressure, allowing for precise application.
5. Post-Operation Procedure:
- After use, turn off the 12V pump.
- Relieve any remaining pressure in the system by briefly depressing the spray wand trigger.
- Disconnect the 12V power source.
- Clean the sprayer thoroughly as described in the Maintenance section.
BẢO TRÌ
Regular maintenance ensures the longevity and optimal performance of your Fimco sprayer.
1. Cleaning the Sprayer:
- After each use, especially when spraying chemicals, rinse the tank thoroughly with clean water.
- Run clean water through the pump, hose, and spray wand for several minutes to flush out any chemical residue.
- For stubborn residues, use a mild detergent solution followed by a clean water rinse.
- Ensure the tank is completely drained and dry before storage.
2. Lưu trữ mùa đông:
- Before storing for winter, completely drain all liquids from the tank, pump, and hoses.
- Run RV antifreeze (non-toxic) through the pump and lines to prevent freezing and damage.
- Store the sprayer in a dry, protected area away from freezing temperatures.
3. Pump Care:
- Periodically check the pump's inlet screen for debris and clean as necessary.
- Inspect electrical connections for corrosion and clean with a wire brush if needed.
4. Hose and Wand Inspection:
- Regularly inspect the hose for cracks, kinks, or leaks. Replace if damaged.
- Check the spray wand tip for clogs and clean with a small brush or needle if necessary.
Xử lý sự cố
This section provides solutions to common issues you might encounter with your sprayer.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Bơm không chạy | No power to pump; Loose electrical connection; Blown fuse | Check 12V power source; Secure connections; Replace fuse if necessary |
| No spray or low pressure | Clogged spray tip; Kinked hose; Low liquid level; Clogged pump inlet screen; Air in system | Clean spray tip; Straighten hose; Refill tank; Clean inlet screen; Prime pump by running with wand open |
| Kết nối rò rỉ | Loose fittings; Damaged O-rings/gaskets | Tighten all connections; Inspect and replace O-rings or gaskets if worn |
| Inconsistent spray pattern | Partially clogged spray tip; Incorrect pressure setting | Clean spray tip thoroughly; Adjust pressure using the control manifold |
Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Thương hiệu | Fimco |
| Số hiệu mẫu | LG-65-HP |
| Thể tích bồn chứa | 65 gallon |
| Nguồn điện | 12V một chiều |
| Loại bơm | High Flo High Performance |
| Lưu lượng dòng chảy tối đa | 4.5 GPM (galông mỗi phút) |
| Áp suất tối đa | 60 PSI (Pound trên inch vuông) |
| Chiều dài ống | 25 Feet (3/8 inch) |
| Spray Wand Length | 22-inch Pro Series |
| Horizontal Spray Distance | Lên đến 38 feet |
| Vertical Spray Distance | Lên đến 27 feet |
| Vật liệu bể chứa | UV-Resistant Polyethylene |
| Mã số UPC | 733029123824 |
Bảo hành và Hỗ trợ khách hàng
For specific warranty information regarding your Fimco LG-65-HP Spot Sprayer, please refer to the warranty card included with your purchase or visit the official Fimco webtrang web. Điều khoản và điều kiện bảo hành có thể thay đổi.
If you require technical assistance, replacement parts, or have questions not covered in this manual, please contact Fimco customer support or your authorized dealer. Contact details can typically be found on the manufacturer's webtrang web hoặc tài liệu mua hàng của bạn.
Note: Always provide your product model number (LG-65-HP) and serial number (if applicable) when contacting support to expedite assistance.





