Giới thiệu & Kết thúcview
The RORRY 3-in-1 Portable Charging Station (Model M3) is a versatile power solution designed for Apple devices, combining a 10,000mAh power bank with a multi-device charging station. Its compact, foldable design makes it ideal for travel and daily use, eliminating the need for multiple chargers and tangled cables.
This device offers fast charging capabilities for your iPhone (MagSafe compatible), Apple Watch, and AirPods simultaneously. Equipped with smart microchips, it ensures safe and efficient charging with protection against short circuits, overheating, and overcharging. The integrated Hall Effect magnetic switch conserves energy by activating only when in use.
Figure 1: The RORRY 3-in-1 Portable Charger in its compact, folded state, demonstrating its portability.
Có gì trong hộp
- 1 x RORRY 3-in-1 Portable Charger Station
- Cáp sạc 1 x USB-C
- 1 x Hướng dẫn sử dụng
Cài đặt
Before first use, fully charge your RORRY Portable Charger. Connect the provided USB-C cable to the charger's USB-C port and plug the other end into a power adapter (20W or higher recommended for optimal performance). The LED indicator lights will show the charging status.
To set up the charging station, gently unfold the device. The magnetic charging pad for your iPhone will lift into position, and the Apple Watch charging puck will extend. The base provides a dedicated area for AirPods charging.
Figure 2: The RORRY 3-in-1 Portable Charger in its unfolded charging station configuration, demonstrating simultaneous charging of an iPhone, Apple Watch, and AirPods.
For iPhones without MagSafe compatibility, a magnetic ring (not included in this package, but often provided with MagSafe accessories) can be attached to the back of your phone or case to enable magnetic alignment with the charger.
Hướng dẫn sử dụng
Sạc thiết bị của bạn
The RORRY charger offers multiple charging modes:
- iPhone (MagSafe): Place your MagSafe-compatible iPhone onto the upright magnetic charging pad. The magnets will align your device for optimal wireless charging. The phone can be charged vertically or horizontally, making it suitable for viewnội dung đang tải trong khi sạc.
- Đồng hồ Apple: Place your Apple Watch onto the dedicated charging puck that extends from the top of the unit. The watch will magnetically snap into place and begin charging.
- AirPods: Place your AirPods charging case onto the flat wireless charging pad located at the base of the unit. Ensure the case is centered on the charging icon for proper connection.
Figure 3: Compatibility chart showing various iPhone, Apple Watch, and AirPods models supported by the RORRY 3-in-1 charger.
Chức năng sạc dự phòng di động
The RORRY charger can also function as a standalone 10,000mAh power bank. When disconnected from a wall adapter, it can continue to wirelessly charge your devices. For wired charging, use the USB-C port on the side of the unit to connect to other devices.
Figure 4: The RORRY charger providing power to an iPhone via its USB-C port, highlighting its portable power bank capability.
Công tắc từ hiệu ứng Hall
The charger features a Hall Effect magnetic switch. When the magnetic charging pad is flipped up, the device automatically activates, saving energy and extending battery life when not in use.
BẢO TRÌ
To ensure the longevity and optimal performance of your RORRY Portable Charger, follow these maintenance guidelines:
- Vệ sinh: Use a soft, dry cloth to wipe down the surface of the charger. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the device.
- Kho: Store the charger in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. When not in use, fold the charger into its compact form to protect the charging surfaces.
- Xử lý: Cẩn thận khi sử dụng thiết bị. Tránh làm rơi hoặc va đập mạnh vì có thể làm hỏng các linh kiện bên trong.
Xử lý sự cố
If you encounter issues with your RORRY Portable Charger, refer to the following common solutions:
| Vấn đề | Nguyên nhân có thể / Giải pháp |
|---|---|
| Device not charging / Slow charging |
|
| Power bank not charging other devices while being charged | As noted, using an adapter with less than 20W may prevent the portable charger from charging other devices while it is charging. Use a 20W+ adapter. |
| Kết nối từ tính yếu | Ensure your iPhone or case is MagSafe compatible. For non-MagSafe devices, consider using a magnetic ring sticker. |
| Các đèn LED chỉ báo không sáng | Press the power button to check the battery level. If the power bank is completely drained, it may take a few minutes for the indicators to light up after plugging it in. |
Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Số hiệu mẫu | M3 |
| Dung lượng pin | 10000 triệuamp Hours (3.85V/38.5Wh) |
| Đầu vào và đầu ra USB-C | 5V=3A, 9V=2.22A, 12V=1.67 (20W Max) |
| Đầu ra không dây | 15W/10W/7.5W/5W |
| Đầu ra cho AirPods | 5W |
| Đầu ra cho đồng hồ | 5W |
| Kích thước sản phẩm | 4.6 x 2.83 x 1.26 inch |
| Trọng lượng sản phẩm | 10.7 ounce |
| Màu sắc | Đen |
| Tính năng đặc biệt | Travel, Magnetic, LED Indicator Lights, Fast Charging, Wireless Charging |
| Nhà sản xuất | Công ty TNHH Công nghệ đổi mới Xianyang Thâm Quyến |
| Nước xuất xứ | Trung Quốc |
Bảo hành & Hỗ trợ
RORRY is committed to providing excellent customer service and stands behind its products. For any inquiries or support needs, please refer to the following:
- Dịch vụ sau bán hàng: 7X24H support is available for your convenience.
- Exchange Service: Enjoy a 30-Day Exchange Service from the date of purchase.
- Kế hoạch chăm sóc: A 12-Months Care Plan is provided to ensure your product is covered.
For detailed support or to claim warranty services, please contact RORRY customer support through their official channels, typically found on the product packaging or their official webđịa điểm.
