1. Sản phẩm hếtview
The APC BR1000S-JP5W is a Line-Interactive Uninterruptible Power Supply (UPS) designed to provide reliable power protection for small to medium-sized businesses and home environments. It features a 1000VA/600W capacity, pure sine wave output, and Automatic Voltage Regulation (AVR) to extend battery life and ensure stable power delivery.
Các tính năng chính:
- Đầu ra sóng sin chuẩn: Provides clean and stable power, compatible with Power Factor Correction (PFC) power supplies.
- Vol tự độngtage Quy định (AVR): Corrects minor voltage fluctuations without switching to battery power, preserving battery life.
- Enhanced Surge Protection: Includes 1 Gigabit network surge protection to safeguard connected equipment from power surges and spikes.
- Quản lý pin thông minh: Optimizes battery performance, life, and reliability through precise charging.
- Bảo vệ quá tải: Automatically shuts down to prevent damage to the unit and connected devices in case of overload or short circuit.
- High-Definition LCD Screen: Displays real-time status information, allowing quick assessment and response to power conditions.
- Phần mềm PowerChute Personal Edition: Bundled software for safe system shutdown during extended power outagnghĩa là
2. Hướng dẫn thiết lập
2.1 Tháo dỡ và kiểm tra
- Carefully unpack the UPS and inspect it for any shipping damage. If damage is found, notify the carrier and dealer.
- Verify that all contents are included: UPS unit, user manual, and any bundled cables or software.
2.2 Kết nối pin
The battery may be disconnected for shipping. Refer to the quick start guide or the unit's specific instructions for connecting the internal battery before initial use.
2.3 Thiết Bị Kết Nối
The UPS provides two types of outlets: Battery Backup & Surge Protected, and Surge Only. Connect your critical equipment to the appropriate outlets.
- Ổ cắm pin dự phòng: Connect your computer, monitor, external hard drives, and other critical devices that require uninterrupted power. These outlets provide power from the battery during outagnghĩa là
- Cửa hàng chỉ Surge: Connect non-critical devices such as printers, scanners, or speakers. These outlets provide surge protection but do not supply battery power during an outage.
- Interface Port: Connect the provided USB cable from the UPS to your computer for communication and use with PowerChute software.
- Network Surge Protection: Use the RJ45 ports to protect your network connection from surges.
2.4 Bật nguồn ban đầu
- Plug the UPS power cord into a wall outlet.
- Press the power button on the front of the UPS. The unit will perform a self-test and the LCD screen will illuminate.
- Hãy để bộ lưu điện (UPS) sạc ít nhất 24 giờ trước khi kết nối các thiết bị quan trọng để đảm bảo dung lượng pin được tối đa.
3. Hướng dẫn vận hành
3.1 Bật / Tắt nguồn
- Để bật nguồn: Nhấn nút nguồn trên bảng điều khiển phía trước.
- Để Tắt Nguồn: Nhấn và giữ nút nguồn cho đến khi thiết bị tắt.
3.2 Hiểu về màn hình LCD
The high-definition LCD screen provides real-time information about the UPS status, including battery charge level, load, and estimated runtime.
3.3 PowerChute Personal Edition Software
Install the PowerChute Personal Edition software on your computer to enable automatic, safe shutdown of your system during extended power outaggiúp ngăn ngừa mất dữ liệu.
4. Bảo trì
4.1 Chăm sóc và thay thế pin
The UPS features a long-life battery, enhanced by Automatic Voltage Regulation (AVR) which reduces battery degradation. While the battery is designed for longevity, it will eventually require replacement. Consult the APC website or your dealer for replacement battery options and instructions.
4.2 Vệ sinh
Periodically clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure ventilation openings are clear of dust and debris.
4.3 Cân nhắc về môi trường
Operate the UPS in a clean, dry environment, away from direct sunlight, excessive heat, and moisture. Ensure adequate airflow around the unit.
KHAI THÁC. Xử lý sự cố
This section addresses common issues you might encounter with your UPS. For more complex problems, contact APC technical support.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| UPS không bật | Battery not connected; UPS not plugged in; Circuit breaker tripped. | Ensure battery is connected; Plug UPS into a live wall outlet; Reset the circuit breaker on the rear panel. |
| UPS beeps continuously or frequently | Đang sử dụng nguồn pin; Tình trạng quá tải; Pin yếu. | Save work and shut down equipment; Reduce connected load; Allow battery to recharge. |
| Thiết bị được kết nối bị mất điện trong quá trình hoạt động.tage | Equipment connected to Surge Only outlets; UPS battery depleted. | Ensure critical equipment is connected to Battery Backup outlets; Allow UPS battery to fully charge. |
6. Thông số kỹ thuật
| Đặc điểm kỹ thuật | Giá trị |
|---|---|
| Tên thương hiệu | Schneider Electric (APC) |
| Nhà sản xuất | Điện Schneider |
| Số hiệu mẫu | BR1000S-JP5W |
| ASIN | B0DBZGCDC8 |
| Lần đầu tiên có mặt trên Amazon.co.jp | 2024/8/2 |
| Tậptage | 100 vôn |
| Cái gì?tage | 600W |
7. Thông tin bảo hành
This APC UPS model BR1000S-JP5W comes with a Bảo hành 5 năm. For detailed terms and conditions of the warranty, please refer to the official APC webTruy cập trang web hoặc liên hệ bộ phận hỗ trợ khách hàng. Giữ lại hóa đơn mua hàng để yêu cầu bảo hành.
8. Hỗ trợ
For technical assistance, product information, or customer service, please visit the official Schneider Electric (APC) website or contact their customer support channels. Ensure you have your product model number (BR1000S-JP5W) and serial number ready when seeking support.
