Hướng dẫn sử dụng bàn làm việc đứng điện ErGear EGESD8

1. Giới thiệu

Thank you for choosing the ErGear EGESD8 Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new desk. Please read these instructions carefully before use and retain them for future reference. This electric standing desk is designed to offer ergonomic flexibility, allowing you to easily switch between sitting and standing positions, promoting a healthier work environment.

The ErGear Electric Standing Desk, showcasing its sleek design and spacious desktop in a contemporary workspace.

2. Hướng dẫn an toàn

Để đảm bảo hoạt động an toàn và tránh hư hỏng, vui lòng tuân thủ những điều sau:

• Hãy đảm bảo tất cả các kết nối đều an toàn trước khi vận hành bàn làm việc.
• Không để trẻ em và vật nuôi lại gần bàn khi đang sử dụng.
• Do not place hands or other body parts near moving parts to avoid injury.
• Không nên chất quá nhiều đồ lên bàn. Trọng lượng tối đa chịu được là... 80kg.
• Tránh đổ chất lỏng trực tiếp lên bảng điều khiển hoặc gần các bộ phận điện.
• If the desk makes unusual noises or movements, discontinue use and consult the troubleshooting section or contact support.
• Chỉ sử dụng bộ đổi nguồn và cáp được cung cấp.

This image highlights the robust construction of the ErGear Electric Standing Desk, capable of supporting up to 80 kg, ensuring stability even under significant load.

3. Nội dung gói hàng

Vui lòng kiểm tra xem tất cả các thành phần đều có mặt và không bị hư hỏng:

• Desktop Panels (assembled)
• Chân bàn (2)
• Foot Pads (2)
• Chân đế bên (2)
• Thanh ngang
• Thanh truyền
• Bảng điều khiển
• Bộ đổi nguồn & cáp
• Cable Grommets (2)
• Móc tai nghe (2)
• Phần cứng lắp ráp (vít, cờ lê lục giác)
• Hướng dẫn sử dụng

4. Hướng dẫn lắp ráp

Follow these steps to assemble your ErGear Electric Standing Desk. It is recommended to have two people for assembly.

Bước 1: Lắp ráp khung

1. Attach the side brackets to the desk legs using the provided screws and Allen wrench.
2. Secure the foot pads to the bottom of each leg.
3. Connect the two leg assemblies with the crossbar, ensuring all screws are tightened.

Step 2: Fix the Transmission Rod

1. Insert the transmission rod into the designated openings on both desk legs.
2. Ensure the rod is properly seated and secured with the retaining clips or screws.

Step 3: Assemble the Desktop Panel

1. Lay the desktop panels face down on a soft, clean surface.
2. Align the panels and secure them together using the provided connectors and screws.

Step 4: Attach the Frame to the Desktop

1. Carefully place the assembled desk frame onto the underside of the desktop.
2. Align the pre-drilled holes and secure the frame to the desktop using the appropriate screws.
3. Attach the control panel to the underside of the desktop in a convenient location using the provided screws.
4. Install the headphone hooks to the underside of the desktop as desired.

Bước 5: Kết nối cáp

1. Connect the motor cables from the legs to the control box.
2. Kết nối cáp bảng điều khiển với hộp điều khiển.
3. Connect the power adapter to the control box and then to a power outlet.

Step 6: Fix the Cable Grommets

1. Insert the cable grommets into the pre-cut holes on the desktop to manage cables.

5. Hướng dẫn vận hành

Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment.

Bảng điều khiển Overview

The desk's intelligent control panel features an LED display showing current height in centimeters, along with up/down arrows and four memory preset buttons for quick adjustments.

• Up/Down Arrows (▲ / ▼): Press and hold to adjust the desk height manually.
• Màn hình LED: Shows the current height of the desk in centimeters.
• Memory Presets (1, 2, 3, 4): Store and recall preferred height settings.

Điều chỉnh chiều cao

The desk can be adjusted between 72 cm và 118 cm.

• Điều chỉnh thủ công: Press and hold the up (▲) or down (▼) arrow button until the desk reaches your desired height.
• Using Memory Presets: Press the corresponding memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.

This image demonstrates the adjustable height range of the ErGear Electric Standing Desk, showing a user sitting at 72cm and standing at 118cm, emphasizing ergonomic flexibility.

Setting Memory Presets

1. Điều chỉnh bàn theo chiều cao mong muốn bằng cách sử dụng các mũi tên lên/xuống.
2. Press the 'M' button (if available, or a 'Set' button) followed by the desired memory button (1, 2, 3, or 4). The display will typically flash or beep to confirm the setting is saved.

Hoạt động im lặng

The desk operates with a quiet motor, producing a noise level of ≤ 55 dB, ensuring a peaceful work environment.

Illustrates the ultra-quiet operation of the ErGear Electric Standing Desk, with a noise level of 55dB, ensuring a peaceful and undisturbed work environment.

6. Bảo trì

Regular maintenance helps prolong the life of your desk:

• Vệ sinh: Wipe the desk surface and legs with a soft, damp vải. Tránh sử dụng hóa chất mạnh hoặc chất tẩy rửa có tính mài mòn.
• Quản lý cáp: Periodically check that all cables are neatly organized and not pinched or tangled. Utilize the integrated cable grommets and hooks.
• Screw Tightness: Occasionally check and tighten any loose screws on the frame or desktop connections.
• Điều tra: Inspect the desk for any signs of wear or damage. If any issues are found, contact customer support.

Chi tiết view of the desk's integrated cable grommets and convenient hooks, designed to help maintain a tidy and organized workspace by managing cables and accessories.

KHAI THÁC. Xử lý sự cố

Nếu bạn gặp bất kỳ sự cố nào với bàn làm việc của mình, vui lòng tham khảo các vấn đề và giải pháp thường gặp sau đây:

If the problem persists after trying these solutions, please contact ErGear customer support.

8. Thông số kỹ thuật

A clear diagram illustrating the overall dimensions of the ErGear Electric Standing Desk, including its 120cm x 60cm desktop and adjustable height range of 72cm to 118cm.

9. Bảo hành và Hỗ trợ

ErGear products are designed for durability and performance. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the warranty card included in your package or visit the official ErGear webđịa điểm.

If you have any questions, require technical assistance, or need to report a missing or damaged part, please contact ErGear customer support through the retailer where you purchased the product or via the contact information provided on the official ErGear webđịa điểm.

Please have your model number (EGESD8) and purchase information ready when contacting support.