Hướng dẫn sử dụng máy khắc laser SCULPFUN S30

Giới thiệu

This manual provides essential information for the safe and effective operation of your SCULPFUN S30 Laser Engraver. Please read it thoroughly before setup and use to ensure optimal performance and safety.

Figure 1: SCULPFUN S30 Laser Engraver with various engraved samples including a wallet, business cards, and a wooden insect model.

Thông tin an toàn

Operating a laser engraver involves potential hazards. Adhere strictly to the following safety guidelines:

• Bảo vệ mắt: Always wear appropriate laser safety goggles (Laser Class IV) when the laser is active. Never look directly at the laser beam.
• Thông gió: Vận hành máy khắc ở khu vực thông gió tốt để làm tan khói và bụi sinh ra trong quá trình khắc và cắt.
• Nguy cơ cháy nổ: Laser engraving can ignite flammable materials. Keep a fire extinguisher nearby and never leave the machine unattended during operation. The S30 includes an emergency power switch for quick shutdown.
• Khả năng tương thích của vật liệu: Only engrave or cut materials safe for laser processing. Avoid PVC, vinyl, and other materials that produce toxic fumes.
• Bảo vệ bề mặt làm việc: Use the provided A4 size steel mat or a similar fire-resistant surface to protect your workbench from laser damage.
• Trẻ em và vật nuôi: Giữ trẻ em và vật nuôi tránh xa khu vực phẫu thuật.
• An toàn điện: Đảm bảo nguồn điện được kết nối và nối đất đúng cách. Không vận hành khi tay ướt hoặc trong điều kiện ẩm ướt.amp điều kiện.

Tính năng sản phẩm

The SCULPFUN S30 Laser Engraver incorporates advanced features for precision and efficiency:

• Hệ thống hỗ trợ khí nén tự động: Equipped with an automatically controlled air pump. This feature intelligently manages air-assist via the M8 button in LightBurn software, directing high-pressure airflow through the metal nozzle. This significantly increases cutting speed (over 5 times faster) and improves cutting performance by clearing debris and reducing charring.
• Ultra-fine Laser Modeling Technology: Features a precise 0.005mm industrial linear guide and a laser focus of 0.06x0.06mm. This results in higher energy density, stronger cutting penetration, and enhanced engraving accuracy, eliminating wave lines in engravings.
• Thiết kế an toàn và ổn định: Constructed from high-strength aluminum alloy, capable of supporting up to 50kg. Includes an emergency power switch for immediate shutdown and an A4 size steel mat to protect surfaces.
• Expandable Engraving Area: The original working area is approximately 400x400mm. It can be expanded to 935x400mm with a Y-axis extension kit, or further to 935x905mm with an XY-axis extension kit (sold separately), accommodating larger projects.
• Khả năng tương thích rộng: The latest 32-bit motherboard supports automatic Air-Assist control. Features Bluetooth and SD card offline printing. Compatible with LightBurn (with M8 air support), LaserGRBL, Benbox, GrblController, and LiteFire. Supports Windows and MAC systems. File Các định dạng bao gồm NC, BMP, JPG, PNG, DXF và các định dạng hình ảnh khác.
• Đầu ra tia laze: Class IV laser with 5000mW output power.

Figure 2: Illustration of the S30's high-density, sharp laser beam and 5W powerful laser beam shaping technology.

Figure 3: Close-up of the S30's built-in high-pressure air assist nozzle, demonstrating airflow.

Figure 4: Diagram showing the automatic controlled air assist feature and its integration with LightBurn software (M8 Air Assist Switch).

Figure 5: Comparison illustrating the benefits of automatic air assist over traditional manual air pumps for clean edges and efficient cutting.

Figure 6: Visual representation of the high precision 0.005mm industrial grade linear rail, highlighting the improved engraving accuracy without wavy lines.

Hướng dẫn thiết lập

Follow these steps to set up your SCULPFUN S30 Laser Engraver:

1. Tháo hộp: Carefully remove all components from the packaging. Verify all parts are present against the packing list.
2. Cuộc họp: Assemble the frame according to the included assembly instructions. Ensure all screws are tightened securely.
3. Lắp đặt mô-đun laser: Mount the laser module onto the gantry. Connect the laser module cable to the main control board.
4. Kết nối máy bơm khí: Connect the air pump to the designated port on the laser module and the main control board.
5. Power and USB Connection: Connect the power adapter to the engraver and a power outlet. Connect the engraver to your computer via the provided USB cable.
6. Cài đặt phần mềm: Install the recommended software (e.g., LightBurn, LaserGRBL) on your computer. Drivers may be required.
7. Hiệu chuẩn ban đầu: Follow the software's instructions for initial calibration, including setting the working area and focusing the laser.

Hình 7: Hếtview of the SCULPFUN S30 components, including the laser module, air pump, and frame parts.

Hướng dẫn sử dụng

This section outlines the basic steps for operating your laser engraver:

1. Chuẩn bị nguyên liệu: Place the material to be engraved or cut on the work surface, ensuring it is flat and secure. Use the steel mat underneath.
2. Thiết lập phần mềm: Open your chosen laser control software (e.g., LightBurn). Import or create your design.
3. Cài đặt tham số: Adjust laser power, speed, and passes based on the material and desired effect. Refer to material test guides for optimal settings.
4. Tập trung tia laser: Manually or automatically adjust the laser focus for optimal performance. The S30 features a fixed-focus laser, simplifying this step.
5. Enable Air Assist: For cutting operations, ensure the automatic air assist is enabled in the software (M8 command in LightBurn). For engraving, it may be turned off for finer details.
6. Bắt đầu hoạt động: Initiate the engraving or cutting process from the software. Monitor the process closely.
7. Hoàn thành: Once the process is complete, wait for the laser to stop and fumes to clear before removing the material.

BẢO TRÌ

Regular maintenance ensures the longevity and performance of your engraver:

• Làm sạch ống kính: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain optimal laser focus and power. The S30 features a replaceable lens for easy maintenance.
• Clean the Work Area: Remove debris and dust from the honeycomb workbed and surrounding areas after each use.
• Lubricate Rails: Apply a small amount of lubricant to the linear guide rails periodically to ensure smooth movement of the laser module.
• Kiểm tra kết nối: Regularly inspect all cable connections for looseness or damage.

Xử lý sự cố

Các vấn đề thường gặp và giải pháp của họ:

Thông số kỹ thuật

• Người mẫu: xxl-S30 5W
• Công suất đầu ra của tia laser: 5W
• Khu vực khắc: 400mm x 400mm (Expandable to 935mm x 400mm or 935mm x 905mm with extension kits)
• Tập trung tia laser: 0.06mm x 0.06mm
• Linear Guide Accuracy: 0.005mm
• Bo mạch chủ: Latest 32-bit with Air-Assist automatic control
• Kết nối: USB, Bluetooth, SD Card (offline printing)
• Phần mềm được hỗ trợ: LightBurn, LaserGRBL, Benbox, GrblController, LiteFire
• Hệ điều hành được hỗ trợ: Windows, MAC
• Được hỗ trợ File Định dạng: NC, BMP, JPG, PNG, DXF, v.v.
• Kích thước sản phẩm: 18.11 x 18.11 x 6.69 inch
• Trọng lượng sản phẩm: 14.17 pound
• Nhà sản xuất: Điêu khắc
• Nước xuất xứ: Trung Quốc
• Ngày đầu tiên có sẵn: Ngày 9 tháng 2024 năm XNUMX

Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the official SCULPFUN webhoặc liên hệ với nhà bán lẻ. Giữ lại hóa đơn mua hàng để làm bằng chứng bảo hành.

Cửa hàng chính thức của SCULPFUN: Visit the SCULPFUN Store on Amazon