1. Sản phẩm hếtview
The TELESIN Waterproof Case (Model: S4-WTP-02-TIS) is specifically designed for the Insta360 Ace Pro action camera. It provides robust protection for your camera during various water sports and extreme outdoor activities, allowing for deep-water diving, surfing, and snorkeling.
Các tính năng chính bao gồm:
- Độ sâu chống thấm nước: Supports diving up to 45 meters (148 feet).
- Độ truyền sáng cao: The case lens is made of ultra-thick tempered glass with over 95% light transmittance, ensuring clear and vivid video quality underwater.
- Bảo vệ toàn diện: Constructed from high-quality PMMA plastic, it protects the camera lens and display screen from impacts, dents, and scratches.
- Fog-Resistant Design: Designed to minimize fogging for clear visuals.
Image 1.1: TELESIN Waterproof Case for Insta360 Ace Pro, highlighting 45-meter waterproof capability, HD lens, and fog-resistant features.
Image 1.2: The rugged shell of the waterproof case, designed to guard against dust and dirt in harsh environments.
2. Có gì trong hộp
Khi mở gói hàng, hãy kiểm tra xem tất cả các thành phần đều có đầy đủ và không bị hư hỏng:
- TELESIN Waterproof Case x 1
- Anti-fog sheets x 6
- Hướng dẫn sử dụng x 1
Image 2.1: Diagram showing the waterproof case dimensions and the included accessories: waterproof case, anti-fog inserts, and instruction manual.
3. Hướng dẫn thiết lập
Follow these steps to properly set up your TELESIN Waterproof Case with your Insta360 Ace Pro camera:
- Inspect the Case: Before each use, carefully check the integrity of all product parts, especially the waterproof sealing ring and the back door. Ensure there are no cracks, debris, or damage that could compromise the seal.
- Kiểm tra vòng đệm: Verify the correct position of the back door rubber ring. Ensure it is clean and free of any impurities (e.g., sand, hair, dust) that could cause water leakage.
- Insert Anti-fog Sheet: Place one anti-fog sheet inside the case to prevent internal fogging, especially in humid or cold conditions.
- Chèn Camera: Gently open the waterproof case and carefully insert your Insta360 Ace Pro camera. Ensure the camera is seated correctly and securely within the case.
- Đóng và chốt: Close the waterproof back door firmly. Ensure the locking latch is tightened completely to create a secure, watertight seal.
- Test (Optional but Recommended): For first-time use or after any maintenance, it is recommended to perform a dry test by submerging the empty case in water for a short period to confirm no leaks occur before inserting your camera.
Video 3.1: Official TELESIN video demonstrating the installation of the Insta360 Ace Pro camera into the waterproof case and its use in water.
Image 3.1: Illustration showing the precise alignment and compatibility of the waterproof case with the Insta360 Ace Pro camera's design.
4. Hướng dẫn vận hành
Once the camera is securely installed in the waterproof case, it is ready for use in aquatic environments.
- Depth Limit: The case is rated for depths up to 45 meters (148 feet). Do not exceed this depth to prevent damage to the case or camera.
- Thao tác nút: The case features external buttons that align with the camera's controls, allowing you to operate the camera (e.g., power on/off, record) while it is sealed inside.
- Khả năng hiển thị: The high light transmittance lens ensures clear visibility for capturing photos and videos underwater.
Image 4.1: A diver using the waterproof case with an Insta360 Ace Pro camera, illustrating its deep waterproof capability up to 45 meters.
Image 4.2: Comparison showing the clear visibility provided by the TELESIN waterproof case's lens compared to another case.
5. Bảo trì
Proper maintenance ensures the longevity and continued waterproof performance of your case:
- Rửa sạch sau khi sử dụng: After each use in saltwater, rinse the exterior of the case thoroughly with fresh water. This prevents salt crystal buildup and corrosion.
- Sấy khô: Allow the case to air dry completely before storing.
- Kho: Store the product in a cool, ventilated, and dry place. The storage temperature should not exceed 40 degrees Celsius (104 degrees Fahrenheit).
- Bảo dưỡng gioăng: Periodically inspect the rubber sealing ring for any signs of wear, cracks, or deformation. Clean it gently with a soft cloth if necessary. Avoid using harsh chemicals or abrasive materials.
Image 5.1: Diagram illustrating the fog-proof design and the placement of an anti-fog sheet to maintain clear visuals.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your waterproof case, consider the following:
- Rò rỉ nước:
- Ensure the back door rubber ring is correctly positioned and free of any impurities.
- Confirm the waterproof back door is closed correctly and the locking latch is tightened before entering the water.
- Inspect the case for any visible cracks or damage. If damaged, discontinue use.
- Fogging Inside Case:
- Ensure an anti-fog sheet is placed inside the case. Replace sheets if they lose effectiveness.
- Make sure the camera and case are dry before sealing to minimize moisture.
- Các nút không phản hồi:
- Verify the camera is correctly seated within the case, allowing proper alignment with the external buttons.
- Check for any obstructions around the buttons.
7. Thông số kỹ thuật
| Thương hiệu | TELESIN |
| Số hiệu mẫu | S4-WTP-02-TIS |
| Máy ảnh tương thích | Insta360 Ace chuyên nghiệp |
| Mức độ chống nước | Waterproof (up to 45m / 148ft) |
| Vật liệu | PMMA Plastic, Tempered Glass |
| Màu sắc | Black (with clear housing) |
| Trọng lượng sản phẩm | 6 ounce |
| Kích thước gói hàng | 3.78 x 3.74 x 2.05 inch |
8. Bảo hành và Hỗ trợ
For warranty information, technical support, or any product-related inquiries, please contact TELESIN customer service directly. Refer to the contact information provided on the product packaging or the official TELESIN webđịa điểm.
Nhà sản xuất: TELESIN
Ngày đầu tiên có sẵn: Ngày 29 tháng 2024 năm XNUMX
