1. Giới thiệu
This manual provides detailed instructions for the installation, operation, and maintenance of your EPLO iX7 Smart Toilet. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. Thông tin an toàn
Observe all safety warnings and precautions to prevent injury or damage to the product.
- Hãy đảm bảo ngắt nguồn điện trước khi tiến hành bất kỳ thao tác lắp đặt hoặc bảo trì nào.
- Do not expose the product to excessive moisture or direct water spray, except as intended for cleaning.
- Chỉ sử dụng nhân viên dịch vụ được ủy quyền để sửa chữa.
- Keep children and pets away from the toilet during operation of automatic features.
- Do not use abrasive cleaners or harsh chemicals on any part of the toilet.
3. Nội dung gói hàng
Xác minh rằng tất cả các thành phần đều có trong gói:
- Đơn vị vệ sinh thông minh
- Điều khiển từ xa
- Sealing Wax Ring
- Mặt bích
- Three-Way Angle Valve
- Bộ lắp ráp
- Cài đặt các tông
- Hướng dẫn sử dụng
- 2 pin AAA (dùng cho điều khiển từ xa)
4. Tính năng sản phẩm
The EPLO iX7 Smart Toilet offers a range of advanced features for enhanced comfort and hygiene.
Image: The EPLO iX7 Smart Toilet with its remote control mounted on the wall.
4.1. Auto Open/Close Lid
The toilet lid can automatically open and close. This function can be toggled on or off. When off, the lid can still be opened/closed via foot kick or remote control.
Image: Illustration of the automatic lid opening and closing feature, alongside the remote control.
4.2. Foam Dispenser (Foam Shield)
The integrated foam dispenser creates a foam layer in the bowl to help isolate odors, prevent splashing, and reduce bacterial adhesion. Foam liquid can be created using body wash and water (60% water).
Image: Visual representation of the foam shield feature, showing its ability to prevent splashing and isolate odors.
4.3. Heated Seat & Night Light
The seat provides adjustable heating for comfort. A built-in night light guides users in the dark, automatically activating in low light conditions.
Hình ảnh: Cận cảnh view of the elongated heated seat and the integrated night light.
4.4. Warm Water Bidet & High-Speed Dryer
The bidet offers instant warm water for female and rear wash functions, with adjustable temperature and nozzle position. After washing, a high-speed dryer with adjustable air temperature and speed provides efficient drying.
Image: Diagram showing UVC cleaning of the nozzle and various bidet wash modes (Rear/Front, H/C Massage, Moving Wash).
Image: Illustration of the high-speed dryer function with adjustable temperature and speed settings.
4.5. Siphonic Jet Flushing Technology
The iX7 utilizes siphonic jet flushing technology for powerful and efficient cleaning. It is tankless and features a built-in backup battery, allowing flushing even during a power outage.
Image: Diagram illustrating the siphonic jet flushing mechanism, showing whirlpool flush, jet flow push, and siphon blowdown.
4.6. LED Temperature Display
An LED display shows real-time temperatures for water, seat, and air dryer. It also features an ECO mode for energy efficiency.
Image: Close-up of the LED display showing water, dryer, and seat temperature settings, including ECO mode.
4.7. Japanese SIAA Certified Seat
The toilet seat is covered with a hygienic coating, certified by Japanese SIAA, for enhanced cleanliness.
Image: Graphic indicating Japanese SIAA certification for the hygienic coating on the toilet seat.
5. Cài đặt
The EPLO iX7 Smart Toilet is designed for floor-mounted installation with a standard 12-inch rough-in. Professional installation is recommended.
5.1. Kiểm tra trước khi cài đặt
- Ensure your bathroom has a standard 12-inch rough-in.
- Verify that the water pressure is at least 35 PSI.
- Confirm availability of a grounded electrical outlet (US style with ground plug).
- Do not use with LSP Pull Stop Box Valves.
5.2. Kích thước
The toilet dimensions are approximately 27.2"D x 16"W x 18.8"H. The seat height is 17 inches.
Image: Technical drawing showing the dimensions of the EPLO iX7 Smart Toilet, including seat height and rough-in requirement.
5.3. Các bước cài đặt
Refer to the included 'Installation Cardboard' and detailed instructions within the user manual for step-by-step guidance. Key steps include:
- Prepare the floor flange and water supply line.
- Install the wax ring and secure the toilet to the floor using the mounting kits.
- Connect the water supply to the three-way angle valve.
- Kết nối dây nguồn với ổ cắm nối đất.
6. Hướng dẫn vận hành
The EPLO iX7 Smart Toilet offers multiple ways to control its functions.
6.1. Flushing Methods
The toilet supports various flushing methods:
- Chức năng xả nước điều khiển từ xa: Use the dedicated flush button on the remote.
- Nút xả bên hông: Press the flush button located on the side of the toilet.
- Foot Kick Flush: A sensor at the base allows for flushing by gently kicking the foot sensor.
- Chức năng tự động xả nước khi không ngồi trên ghế: The toilet automatically flushes after the user stands up and moves away from the seat. This function can be enabled/disabled.
Image: Visual guide to the four flushing methods (remote, press, foot kick, off-seat auto flush) and the auto open/close sequence for male and female users.
6.2. Chức năng của vòi xịt vệ sinh
Use the remote control to activate and adjust bidet functions:
- Rửa phía sau: Dùng để làm sạch hậu môn.
- Giặt giũ cho nữ: Dùng để vệ sinh phụ nữ.
- Moving Wash: Vòi phun di chuyển qua lại để làm sạch diện tích rộng hơn.
- Massage H/C: Alternating hot and cold water for a massage effect (10 seconds hot, 5 seconds cold).
- Adjust water temperature and pressure using the remote.
6.3. Dryer Operation
After bidet use, activate the dryer function via the remote control. Adjust air temperature and speed to your preference.
6.4. Điều khiển từ xa
The wireless remote control provides access to all smart toilet functions. Ensure the included AAA batteries are installed correctly.
7. Bảo trì
Regular cleaning and maintenance ensure optimal performance and longevity of your EPLO iX7 Smart Toilet.
7.1. Vệ sinh bồn cầu
Clean the ceramic bowl with a mild, non-abrasive toilet cleaner and a soft brush or cloth. Avoid harsh chemicals that could damage the glaze.
7.2. Cleaning the Seat and Lid
Lau sạch ghế và nắp bằng khăn lauamp cloth and mild soap. Do not use chemical cleaners on the SIAA certified hygienic coating, as it may cause adverse reactions.
7.3. Vệ sinh vòi phun
The bidet nozzle is removable for cleaning. Periodically clean the nozzle with a soft brush and water. The UVC cleaning function helps maintain nozzle hygiene before each use.
7.4. Foam Dispenser Maintenance
Regularly refill the foam dispenser with the recommended mixture of body wash and water (60% water).
KHAI THÁC. Xử lý sự cố
If you encounter issues, refer to the following common troubleshooting tips. For persistent problems, contact customer support.
- Không có điện: Check if the power cord is securely plugged in and the circuit breaker is not tripped.
- Không có dòng nước: Ensure the water supply valve is fully open. Check for kinks in the water supply hose.
- Nắp không tự động mở/đóng: Verify the auto open/close function is enabled in the settings. Check for obstructions.
- Bồn vệ sinh không hoạt động: Ensure the seat sensor is activated (user is seated). Check water temperature settings.
- Điều khiển từ xa không phản hồi: Replace the AAA batteries in the remote control. Ensure there are no obstructions between the remote and the toilet.
- Xả yếu: Check water pressure. Ensure the siphonic jet is not obstructed.
9. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Người mẫu | iX7 |
| Kích thước sản phẩm | 27.2"D x 16"W x 18.8"H |
| Trọng lượng sản phẩm | 103 Bảng Anh |
| Vật liệu | ABS, Ceramic, Stainless Steel Nozzle |
| Loại cài đặt | Tủ đứng |
| Thô sơ | Tiêu chuẩn 12 inch |
| Chiều cao ghế | 17 inch |
| Tiêu thụ nước | 1.28 gallon mỗi lần xả |
| Loại xả | Automatic, Siphonic Jet Flushing Technology |
| Tính năng đặc biệt | Auto Open/Close, LED Temp Display, Nightlight, High Speed Dryer, Adjustable Dryer Speed, Foam Dispenser, Heated Seat, Warm Water Bidet, UVC Cleaning, Backup Battery |
| Chứng nhận | ETL Listed, Japanese SIAA Certified (Seat) |
| Cắm điện | B - US style with ground plug |
| Pin (Điều khiển từ xa) | 2 pin AAA (có kèm theo) |
10. Bảo hành và Hỗ trợ
EPLO provides a Đảm bảo hoàn tiền trong vòng 30 ngày và một 12-Month Replacement for the entire toilet unit. For any problems or inquiries, please contact EPLO customer service. They aim to reply within 24 hours.
10.1. Cách liên hệ bộ phận hỗ trợ
If you purchased through Amazon, you can typically find the seller's contact information by navigating to your order details or by clicking on the seller's name on the product page and selecting 'Ask a question'.
Image: Instructions on how to access customer support by clicking 'Sold by EPLO US' and then 'Ask a question' on the Amazon product page.
