LILYGO TTGO T-OI Plus ESP32-C3 Development Board User Manual

1. Giới thiệu

The LILYGO TTGO T-OI Plus is a compact and powerful development board designed for Internet of Things (IoT) and embedded projects. It integrates the ESP32-C3 main control chip, which is a secure, low-power, and cost-effective RISC-V microcontroller. This version includes a battery holder for portable applications. The board supports Wi-Fi and Bluetooth 5 (BLE) for versatile wireless connectivity.

2. Sản phẩm hếtview và Tính năng

The T-OI Plus is engineered for projects requiring robust performance and advanced features. Its key components and capabilities include:

• ESP32-C3 Main Control Chip: A RISC-V based MCU offering security, low power consumption, and cost-effectiveness.
• Kết nối không dây: Integrated Wi-Fi and Bluetooth 5 (BLE) for seamless communication.
• Giá đỡ pin: Designed to accommodate a 16340 battery, enabling standalone operation.
• Grove Series Interface Compatibility: Features a connector compatible with Grove series interface modules for easy expansion.
• Cổng USB-C: Dùng cho nguồn điện và truyền dữ liệu.
• Chân GPIO: Exposed pins for connecting various sensors, actuators, and other peripherals.

Hình 1: Trên cùng view of the LILYGO TTGO T-OI Plus ESP32-C3 development board, showing the ESP32-C3 chip, USB-C port, and GPIO pins.

Figure 2: The LILYGO TTGO T-OI Plus board, highlighting the Grove series interface connector for module compatibility.

3. Nội dung gói hàng

Xác minh rằng tất cả các mục đều có trong gói hàng của bạn:

• 1 x LILYGO TTGO T-OI Plus ESP32-C3 Development Board with Battery Holder
• 2 x 2.54mm Female PIN Headers (1*8P)

Figure 3: Contents of the package, including the T-OI Plus board with battery holder and two 8-pin female headers.

4. Thiết lập

4.1. Lắp đặt pin (Tùy chọn)

The T-OI Plus board is designed to work with a 16340 battery for portable power. Ensure correct polarity when inserting the battery.

1. Locate the battery holder on the underside of the development board.
2. Insert a 16340 battery into the holder, aligning the positive (+) and negative (-) terminals as indicated on the holder.

Figure 4: Correct orientation for inserting a 16340 battery into the battery holder.

4.2. Kết nối với máy tính

To program and power the board, connect it to your computer using a USB-C cable.

1. Connect one end of a USB-C cable to the USB-C port on the T-OI Plus board.
2. Kết nối đầu còn lại của cáp USB-C vào cổng USB có sẵn trên máy tính của bạn.
3. The board should power on, and your computer may attempt to install necessary drivers. Refer to the official LILYGO GitHub repository for driver installation instructions if needed.

For detailed setup guides and programming examples, visit the official GitHub repository: github.com/Xinyuan-LilyGO/LilyGo-T-OI-PLUS

5. Hướng dẫn vận hành

The LILYGO TTGO T-OI Plus is a development board, meaning its operation is primarily defined by the firmware you upload to it. It is compatible with various development environments such as the Arduino IDE or ESP-IDF.

• Lập trình: Use the USB-C connection to upload your code to the ESP32-C3 chip.
• Truyền thông không dây: Utilize the integrated Wi-Fi and Bluetooth 5 (BLE) capabilities to connect to networks, other devices, or cloud services as programmed.
• Cách sử dụng GPIO: Connect external components to the GPIO pins according to your project's requirements. Refer to the ESP32-C3 datasheet and board schematics (available on GitHub) for pinout details.
• Quản lý năng lượng: The board can be powered via USB-C or the installed 16340 battery. The battery holder allows for portable and standalone applications.

6. Bảo trì

To ensure the longevity and proper functioning of your LILYGO TTGO T-OI Plus development board, follow these maintenance guidelines:

• Kho: Store the board in a dry, anti-static environment when not in use. Avoid extreme temperatures.
• Vệ sinh: Use a soft, dry brush or compressed air to remove dust. Do not use liquid cleaners.
• Xử lý: Handle the board by its edges to avoid touching sensitive components, especially when powered.
• Nguồn điện: Always use a stable and appropriate power supply (5V via USB-C). Ensure the battery used is a compatible 16340 type.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your T-OI Plus board, consider the following troubleshooting steps:

• Bo mạch không khởi động:
  • Check the USB-C cable connection and ensure it's securely plugged into both the board and your computer/power source.
  • If using battery power, verify the 16340 battery is correctly inserted with the right polarity and is charged.
  • Hãy thử sử dụng một cáp USB-C khác hoặc cổng USB khác trên máy tính của bạn.
• Computer Not Recognizing Board:
  • Ensure necessary USB drivers for the ESP32-C3 are installed on your operating system. Refer to the GitHub repository for driver information.
  • Restart your computer and try reconnecting the board.
• Code Upload Failure:
  • Verify that the correct board and COM port are selected in your development environment (e.g., Arduino IDE).
  • Check for any error messages in the console of your development environment.
  • Ensure the board is in programming mode if required by your specific setup (usually automatic with ESP32 boards).

8. Thông số kỹ thuật

Figure 5: Approximate dimensions of the T-OI Plus board and its integrated battery holder.

9. Bảo hành và Hỗ trợ

LILYGO products are designed for reliability and performance. For any questions or suggestions regarding the LILYGO TTGO T-OI Plus, please feel free to contact LILYGO customer service. We are committed to providing prompt assistance.

Official GitHub Repository for technical documentation and community support: github.com/Xinyuan-LilyGO/LilyGo-T-OI-PLUS