TopTes TS-501B Sound Level Meter and TS-710 Light Meter Instruction Manual

1. Giới thiệu

This manual provides essential information for the safe and effective operation of your TopTes TS-501B Sound Level Meter and TS-710 Light Meter. These devices are designed for accurate environmental monitoring, allowing users to measure noise levels and light intensity in various settings. Please read this manual thoroughly before use and retain it for future reference.

2. Sản phẩm hếtview

The TopTes TS-501B Sound Level Meter and TS-710 Light Meter are a combined solution for environmental assessment. The TS-501B measures sound levels, while the TS-710 measures light intensity, ambient temperature, and humidity. Both devices feature a 2.25-inch backlit LCD screen for clear readings and user-friendly functions.

2.1 TS-501B Sound Level Meter

The TS-501B is equipped with a 1/2 inch electric condenser microphone for precise sound measurement. It offers A/C weighting options to analyze sound based on human ear perception (A-weighting) or for general noise analysis (C-weighting). The measurement range is 30 to 130 dB.

Hình 1: TS-501B Sound Level Meter showing A-Weighting measurement. This mode measures sound levels as perceived by the human ear, typically ranging from 30 to 130 dBA.

Hình 2: TS-501B Sound Level Meter showing C-Weighting measurement. This mode is suitable for general noise analysis, with a range of 30 to 130 dBC.

Hình 3: Cận cảnh view of the TS-501B's 1/2 inch Electric Condenser Microphone, protected by a windshield ball for high precision measurements.

2.2 TS-710 Light Meter

The TS-710 features a 180° rotating sensor for flexible light measurement from various directions. It measures light intensity from 0.1 to 200,000 lux (or 0.1 to 20,000 FC) and also provides readings for ambient temperature and humidity.

Hình 4: TS-710 Light Meter demonstrating its 180° rotating sensor, allowing detection of light from all directions.

Hình 5: TS-710 Light Meter with its easy-to-read 2.25-inch backlit LCD screen, showing current light, temperature, and humidity readings.

Hình 6: TS-710 Light Meter illustrating its capability for dual measurement units: LUX (0.1~200,000 LUX) and Foot-Candle (0.1~20,000 FC).

3. Thông tin an toàn

Observe the following safety precautions to prevent injury and avoid damage to the devices:

• Do not attempt to open or modify the devices.
• Tránh để thiết bị tiếp xúc với nước, độ ẩm cao và nhiệt độ quá cao hoặc quá thấp.
• Tránh làm rơi hoặc va đập mạnh vào thiết bị.
• Remove batteries if the devices will not be used for an extended period.
• Bỏ pin theo quy định của địa phương.

4. Nội dung gói hàng

Xác minh rằng tất cả các mục đều có trong gói hàng:

• 1 x TopTes TS-710 Light Meter
• 1 x TopTes TS-501B Sound Level Meter
• 2 x Carrying Cases (one for each device)
• AAA Batteries (pre-installed or included separately)
• Hướng dẫn sử dụng (tài liệu này)

5. Thiết lập

5.1 Lắp đặt pin

1. Locate the battery compartment on the back of each device.
2. Mở nắp pin.
3. Lắp pin AAA vào, đảm bảo đúng cực (+/-).
4. Đóng chặt nắp pin.

5.2 Bật / Tắt nguồn

Nhấn nút Quyền lực button (usually marked with a power symbol) on each device to turn it on. Press and hold the same button to turn it off. Both devices feature an automatic power-off function to conserve battery life after a period of inactivity.

6. Hướng dẫn vận hành

6.1 General Functions (Both Devices)

• Ghi lại giá trị MAX/MIN: Nhấn nút TỐI ĐA/TỐI THIỂU button to display the maximum or minimum recorded value during a measurement session. Press again to cycle through MAX, MIN, and current readings.
• Giữ dữ liệu: Nhấn nút GIỮ button (or similar icon) to freeze the current reading on the display. Press again to release.
• Đèn nền: Nhấn nút Đèn nền button (often marked with a light bulb symbol) to activate or deactivate the screen backlight for improved visibility in low-light conditions.

Hình 7: Explanation of MAX and MIN functions. MAX displays the highest value measured, while MIN displays the lowest value measured over a given period.

6.2 TS-501B Sound Level Meter Operation

1. Bật thiết bị.
2. Select Weighting (A/C): Nhấn nút Điều hòa button to switch between A-weighting (for human ear perception) and C-weighting (for general noise analysis).
3. Select Response Time (FAST/SLOW): Nhấn nút Tiền/Thị button to choose between Fast (125ms) or Slow (1s) response times, depending on the nature of the sound being measured.
4. Point the microphone towards the sound source. The current sound level in decibels (dB) will be displayed.

6.3 TS-710 Light Meter Operation

1. Bật thiết bị.
2. Rotate Sensor: Adjust the 180° rotating sensor to face the light source directly or to capture ambient light as needed.
3. Select Unit (LUX/FC): Nhấn nút ĐƠN VỊ button to switch between Lux and Foot-Candle measurement units.
4. The device will display the light intensity, ambient temperature, and humidity.

7. Bảo trì

• Vệ sinh: Use a soft, dry cloth to clean the device surfaces. Do not use abrasive cleaners or solvents. For the TS-710's light sensor, ensure it remains clean and free of dust for accurate readings.
• Kho: Store the devices in their protective carrying cases in a cool, dry place when not in use. Avoid areas with high humidity or extreme temperatures.
• Thay thế pin: Hãy thay pin ngay khi đèn báo pin yếu bật sáng trên màn hình để đảm bảo thiết bị hoạt động chính xác liên tục.

KHAI THÁC. Xử lý sự cố

9. Thông số kỹ thuật

9.1 TS-501B Sound Level Meter

• Phạm vi đo lường: 30 đến 130 dB
• Trọng số: Điều hòa
• Micrô: 1/2 inch Electric Condenser Microphone
• Trưng bày: Màn hình LCD có đèn nền 2.25 inch
• Chức năng: MAX/MIN recording, Data Hold, Auto Power-Off

9.2 TS-710 Light Meter

• Light Measurement Range: 0.1 to 200,000 Lux / 0.1 to 20,000 FC
• Cảm biến: 180° Rotating Sensor
• Các phép đo bổ sung: Nhiệt độ môi trường, độ ẩm
• Trưng bày: Màn hình LCD có đèn nền 2.25 inch
• Chức năng: MAX/MIN recording, Data Hold, Auto Power-Off

10. Bảo hành và Hỗ trợ

TopTes products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the TopTes official website or your purchase documentation. Please have your model numbers (TS-501B, TS-710) and purchase date available when contacting support.