1. Giới thiệu
This manual provides comprehensive instructions for the operation and maintenance of your OBSBOT Tail Series Smart Remote Controller. This device is designed to enhance your control over compatible OBSBOT Tail series cameras, including Tail 2 and Tail Air, offering precise Pan-Tilt-Zoom (PTZ) functionality and other advanced features.
2. Sản phẩm hếtview
The OBSBOT Tail Series Smart Remote Controller features an intuitive layout for seamless interaction with your camera. Below is a visual guide to its components and controls.
Hình 2.1: Mặt trước view of the OBSBOT Tail Series Smart Remote Controller.
Figure 2.2: Labeled diagram of the remote controller's buttons and features.
- Device ON/OFF Button: Powers the remote controller on or off.
- Multi-screen Mode Button: Toggles between different display modes.
- Chỉ báo trạng thái: Displays the current status of the remote controller.
- Focus / Camera Button: Controls camera focus or switches camera modes.
- Nút ghi: Khởi động hoặc dừng quay video.
- Gimbal Control Joystick: Provides precise control over the camera's pan, tilt, and zoom.
- Human Tracking Button: Activates human subject tracking.
- Animal Tracking Button: Activates animal subject tracking.
- Laser Close-up Button: Double-press to activate the laser pointer for quick close-up tracking.
- Preset Positions (P1, P2, P3): Stores and recalls up to three custom camera positions.
- Select Camera (1, 2, 3): Switches control between up to three paired OBSBOT Tail series devices.
- Nút tùy chỉnh: A programmable button for user-defined functions.
- Zoom Button (T/W): Rocker switch for zooming in (T) or out (W).
- Nút khóa: Ngăn ngừa việc nhấn nút vô tình.
- Cổng USB-C: For charging the remote controller.
3. Thiết lập và ghép nối
3.1 Sạc bộ điều khiển từ xa
Before initial use, ensure the remote controller is fully charged. Connect the supplied USB-A to USB-C cable to the USB-C port on the side of the remote controller and to a compatible USB power source.
Figure 3.1: USB-C charging port location on the remote controller.
3.2 Pairing with OBSBOT Tail Series Camera
The remote controller can be wirelessly connected to up to three OBSBOT Tail series devices via Bluetooth. Follow these steps to pair your remote controller with your camera:
- Ensure your OBSBOT Tail series camera (e.g., Tail 2/Air) is powered on.
- On the camera, quickly press the power button three times. The camera's indicator light will begin to flash blue, indicating it is in pairing mode.
- On the remote controller, press and hold the Human Tracking button (person icon) and the '1' button simultaneously. The remote's indicator light will also flash blue.
- Once successfully paired, both the camera and remote controller indicator lights will turn green.
- To pair additional cameras (up to three), repeat steps 2 and 3, using the '2' or '3' button on the remote controller for each subsequent camera.
Video 3.2: Official demonstration of OBSBOT Tail Air Remote Controller features, including pairing and control. This video is provided by the seller.
Note: If the remote is unresponsive, check the lock switch on the side. Slide it to the unlocked position to enable control.
Figure 3.3: Remote controller lock switch in locked (red) and unlocked positions.
4. Hướng dẫn vận hành
4.1 Điều khiển PTZ
The remote offers two methods for PTZ control:
- Điều khiển cần điều khiển: Use the central joystick to pan, tilt, and zoom the camera.
- Wrist Movements (Motion Control): With the built-in gyroscope, you can control the camera's gimbal by moving your wrist while holding down the joystick.
Figure 4.1: Demonstrating joystick control for camera movement.
4.2 Tracking Functions
- Theo dõi con người: Press the button with the 'person' icon to activate human subject tracking.
- Theo dõi động vật: Press the button with the 'paw print' icon to activate animal subject tracking.
- Laser Close-up: Double-press the Laser Close-up button. The camera will instantly follow and zoom in on the area pointed by the remote's laser.
4.3 Vị trí cài đặt sẵn
The remote allows you to save and recall up to three camera positions:
- Lưu giá trị đặt trước: Position the camera as desired, then press and hold one of the P1, P2, or P3 buttons until the indicator confirms the position is saved.
- Khôi phục cài đặt sẵn: Briefly press the desired P1, P2, or P3 button to move the camera to the saved position.
4.4 Nút tùy chỉnh
The Custom Button can be configured via the OBSBOT app to perform a specific function tailored to your needs.
Figure 4.2: Location of the customizable button.
5. Bảo trì
- Vệ sinh: Use a soft, dry cloth to clean the remote controller. Avoid using harsh chemicals or abrasive materials.
- Kho: Bảo quản bộ điều khiển từ xa ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp và nhiệt độ cao.
- Chăm sóc pin: To prolong battery life, avoid fully discharging the remote frequently. Charge it regularly, even if not in constant use.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Điều khiển từ xa không phản hồi. | Điều khiển từ xa bị khóa. | Check the lock switch on the side of the remote and slide it to the unlocked position. |
| Unable to pair with camera. | Camera or remote not in pairing mode; out of range. | Ensure both devices are powered on and in pairing mode (camera indicator flashing blue, remote indicator flashing blue). Bring devices closer together. |
| PTZ control is erratic or unresponsive. | Low battery; interference; remote not properly paired. | Charge the remote. Re-pair the remote with the camera. Ensure no strong wireless interference. |
7. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Kích thước sản phẩm | 7.9 x 4.8 x 6.3 inch |
| Trọng lượng sản phẩm | 7.4 ounce |
| Số hiệu mẫu sản phẩm | OBSBOT_TAIL SERIES_REMOTE |
| Thương hiệu | OBSBOT |
| Tính năng đặc biệt | Có thể sạc lại |
| Màu sắc | Đen |
| Số lượng thiết bị được hỗ trợ tối đa | 3 |
| Thiết bị tương thích | Tail Series (Tail 2/ Tail Air) |
8. Bảo hành và Hỗ trợ
For warranty information and technical support, please refer to the official OBSBOT webtrang web hoặc liên hệ trực tiếp với bộ phận dịch vụ khách hàng của họ. Giữ lại biên lai mua hàng để yêu cầu bảo hành.
