1. Giới thiệu
This manual provides detailed instructions for the assembly, operation, and maintenance of your Barska Winbest Pursuit-200 Metal Detector Field Kit. Please read this manual thoroughly before using the product to ensure proper function and longevity.
The Pursuit-200 Metal Detector Field Kit is designed for detecting various metals and includes a main metal detector with an LCD display, a handheld wand detector, headphones, a folding shovel, and a soft carrying case.
2. Nội dung gói hàng
Xác minh rằng tất cả các mục được liệt kê dưới đây đều có trong gói hàng của bạn:
- Barska Winbest Pursuit-200 Metal Detector (Main Unit)
- Surveyor-100 Handheld Wand Metal Detector
- Tai nghe
- Folding Shovel with Compass
- Hộp đựng mềm
- Hướng dẫn sử dụng (tài liệu này)
Hình ảnh 2.1: All components of the Barska Winbest Pursuit-200 Metal Detector Field Kit, including the main detector, wand detector, headphones, shovel, and carrying case.
3. Thiết lập
3.1. Assembling the Main Metal Detector
- Gắn cuộn tìm kiếm: Secure the search coil to the lower stem using the provided bolt and nut. Ensure it is firmly attached but allows for slight angle adjustment.
- Connect the Lower and Middle Stems: Insert the lower stem into the middle stem and secure it with the spring clip or locking mechanism.
- Attach the Control Housing: Slide the control housing onto the upper stem. Adjust the armrest for comfort and secure the control housing in place.
- Quấn cáp: Carefully wrap the search coil cable around the stem, ensuring it is not too tight or loose, and plug the connector into the control housing.
- Cài đặt Pin: Open the battery compartment on the control housing and insert the required batteries (refer to specifications for battery type).
Hình ảnh 3.1: The main metal detector fully assembled, showing the search coil, stem, armrest, and control housing.
3.2. Preparing the Wand Detector
The Surveyor-100 Wand Metal Detector typically requires battery installation. Open the battery compartment, insert the correct batteries, and close the compartment securely.
Hình ảnh 3.2: The handheld wand metal detector, showing its compact design and control buttons.
3.3. Preparing the Folding Shovel
Unfold the shovel and secure its locking mechanisms to ensure it is rigid for use. The shovel can be configured as a shovel or a pick. The compass is integrated into the handle.
Hình ảnh 3.3: The multi-use folding shovel, shown in both shovel and pick configurations.
4. Hướng dẫn vận hành
4.1. Main Metal Detector Operation
Hình ảnh 4.1: Close-up of the Pursuit-200 metal detector's LCD display and control panel, showing buttons for DISC, NOTCH, SENS, and volume knob.
- Bật nguồn: Turn the VOLUME knob clockwise to power on the detector.
- Adjust Sensitivity (SENS): Press the SENS button and use the '+' and '-' buttons to adjust the sensitivity level. Higher sensitivity increases detection depth but may also increase false signals.
- Discrimination (DISC): Press the DISC button and use '+' and '-' to set the discrimination level. This feature allows the detector to ignore certain types of metal (e.g., iron). The LCD will show the target ID.
- notch: Use the NOTCH function to selectively eliminate specific metal categories from detection.
- Tai nghe: Plug the included headphones into the 'PHONE' jack for private listening and clearer audio signals.
- Quét: Hold the detector with the search coil parallel to the ground, about 1-2 inches above the surface. Sweep the coil slowly from side to side in overlapping arcs.
- Target Indication: When a metal object is detected, the detector will emit an audible tone, and the LCD display will show a target ID and signal strength.
- Cuộn dây tìm kiếm chống thấm nước: The 10-inch search coil is weather-sealed and can be submerged in shallow water for detection. Ensure the control housing is not submerged.
4.2. Wand Detector Operation
Hình ảnh 4.2: A hand holding the Surveyor-100 wand detector, demonstrating its ergonomic design for pinpointing targets.
- Bật nguồn: Press the Power ON/OFF button to activate the wand detector.
- Xác định: After locating a general area with the main detector, use the wand detector to precisely pinpoint the target's location in the soil.
- Chỉ định: The wand detector will typically use audible alerts and/or vibration, along with LED indicators, to signal the presence of metal.
4.3. Shovel Usage
Use the folding shovel to excavate detected targets. Its compact design and pick function are useful for breaking up tough ground. The integrated compass can assist with navigation.
5. Bảo trì
- Vệ sinh: Wipe down the detector and accessories with a damp vải sau mỗi lần sử dụng. Tránh sử dụng chất tẩy rửa có tính mài mòn.
- Kho: Store the kit in the provided soft carrying case in a dry, cool place when not in use.
- Chăm sóc pin: Remove batteries from both detectors if they will not be used for an extended period to prevent leakage.
- Kiểm tra cáp: Regularly check the search coil cable for any signs of wear or damage.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| No power to main detector/wand detector | Pin chết hoặc lắp sai | Thay pin mới, đảm bảo lắp đúng cực. |
| Tín hiệu bất thường hoặc kết quả dương tính giả | High sensitivity, electromagnetic interference, mineralized ground | Reduce sensitivity. Move away from power lines or other electronic devices. Use discrimination settings. |
| Detector not finding metal | Low sensitivity, incorrect discrimination settings, search coil not parallel to ground | Increase sensitivity. Adjust discrimination settings. Ensure search coil is swept correctly. |
| Không có âm thanh từ tai nghe | Headphones not plugged in correctly, volume too low, faulty headphones | Ensure headphones are fully plugged in. Increase volume. Test with another pair of headphones if available. |
7. Thông số kỹ thuật
- Người mẫu: Pursuit-200 (BE12748)
- Thương hiệu: Barska
- Kích thước cuộn dây dò: 10 inches (Waterproof)
- Trưng bày: Màn hình tinh thể lỏng
- Nguồn điện: Sử dụng pin (Cần pin: Có)
- Chiều dài có thể điều chỉnh: Yes, up to 47 inches
- Vật liệu: Kim loại
- Trọng lượng sản phẩm: Khoảng 0.4 kg (14.1 ounce)
- Kích thước sản phẩm: 10"Dài x 9.5"Rộng x 48.42"Cao (sau khi lắp ráp)
- Đánh giá bảo vệ quốc tế: IP541 (cho cuộn dây dò tìm)
- Phụ kiện đi kèm: Surveyor-100 Wand Detector, Headphones, Folding Shovel with Compass, Soft Carrying Case
8. Thông tin an toàn
- Luôn phải xin phép trước khi khám xét trên tài sản tư nhân.
- Be aware of local regulations regarding metal detecting.
- Exercise caution when digging to avoid damaging underground utilities or historical artifacts.
- Do not use the metal detector near live electrical wires or in hazardous environments.
- Để pin xa tầm tay trẻ em và vứt pin đúng nơi quy định.
9. Bảo hành và Hỗ trợ
For warranty information and customer support, please refer to the official Barska webtrang web hoặc liên hệ với bộ phận chăm sóc khách hàng của họ. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng.
Barska Official Webđịa điểm: www.barska.com
