Hướng dẫn sử dụng bộ mở rộng xoay LaserPecker LP4

1. Giới thiệu

This manual provides essential instructions for the safe and effective use of the LaserPecker LP4 Rotary Extension Set. This accessory is designed to expand the engraving capabilities of your LaserPecker LP4 laser engraver, allowing for precise engraving on a wide range of cylindrical, conical, spherical, and annular objects.

Vui lòng đọc kỹ hướng dẫn sử dụng này trước khi vận hành thiết bị để đảm bảo thiết lập, vận hành và bảo trì đúng cách.

2. Thông tin an toàn

WARNING: Laser products can cause serious injury if not used properly. Always follow safety guidelines.

• The LaserPecker LP4 is a Class I laser product with a power output of 0.5mW.
• Always wear appropriate laser safety goggles when operating the LaserPecker LP4 and its accessories.
• Đảm bảo khu vực làm việc được thông gió tốt.
• Không bao giờ để máy tự động trong khi vận hành.
• Giữ trẻ em và vật nuôi tránh xa khu vực phẫu thuật.
• Do not engrave flammable or explosive materials.
• Refer to the main LaserPecker LP4 manual for comprehensive safety instructions regarding the laser unit itself.

3. Nội dung gói hàng

Xác minh rằng tất cả các thành phần đều có trong gói của bạn:

• Rotary Extension Base Unit
• Ring Clip Jaw Attachment
• Double-step Jaw Attachment
• Single-step Jaw Attachment
• Cáp kết nối
• Hướng dẫn sử dụng (tài liệu này)

Hình 1: LaserPecker LP4 Laser Engraver with the Rotary Extension Set attached, ready for engraving a conical object.

4. Thiết lập

1. Tháo hộp: Cẩn thận loại bỏ tất cả các thành phần khỏi bao bì.
2. Vị trí: Place the Rotary Extension Base Unit on a stable, level surface.
3. Connecting to LP4: Connect the Rotary Extension to your LaserPecker LP4 unit using the provided connection cable. Refer to your LP4 main manual for specific port locations.
4. Attaching Jaw Attachments: Select the appropriate jaw attachment (Ring Clip, Double-step, or Single-step) based on the object you intend to engrave. Securely attach it to the rotary unit.
   

   Hình 2: The three available jaw attachments and their respective diameter ranges: Ring Clip (13-78 mm), Double-step (0-128 mm), and Single-step (66-145 mm).

5. Securing the Object: Place the object to be engraved firmly into the chosen jaw attachment. Ensure it is centered and stable to prevent movement during engraving. The Rotary Extension supports objects with diameters from 3mm to 200mm.
6. Điều chỉnh góc: For conical or irregularly shaped objects, adjust the angle of the rotary unit to match the object's surface. The unit allows for 180° precise angle adjustment.
   

   Hình 3: Illustrates the 180° precise angle adjustment feature, allowing the rotary unit to tilt for conical objects.

5. Hướng dẫn vận hành

The Rotary Extension works in conjunction with your LaserPecker LP4 engraver. Ensure your LP4 is powered on and connected to the Rotary Extension.

1. Thiết lập phần mềm: Open the LaserPecker application on your control device (smartphone/tablet/computer). Select the rotary engraving mode.
2. Chuẩn bị thiết kế: Import or create your design. Adjust the design to fit the dimensions and curvature of your object.
3. Lựa chọn vật liệu: Choose the appropriate material settings within the software. The LP4 supports engraving on over 300 materials using its dual-laser system (diode and pulsed infrared lasers).
4. Trướcview and Positioning: Use the one-click preview function on the LP4's LED touch screen or within the software to project the engraving path onto your object. Adjust the object's position or the design as needed for accurate placement.
5. Bắt đầu khắc: Sau khi hài lòng với kết quả trước đóview, initiate the engraving process. Monitor the progress via the LP4's screen or the application.
6. Engraving Various Objects: The Rotary Extension is versatile for items such as tumblers, rings, wine glasses, and more.
   

   Hình 4: Examples of the Rotary Extension's multifunctionality, showing engraving on a tumbler, baseball, glass, and ring.
   

   Hình 5: A selection of common items suitable for engraving with the Rotary Extension, such as mugs, tumblers, rings, baseballs, and flowerpots.

   

   Hình 6: Demonstrates advanced application scenarios, including horizontal engraving for conical objects and interior engraving for rings.

7. Hoàn thành: Once engraving is complete, the machine will stop. Carefully remove the engraved object.

6. Bảo trì

• Vệ sinh: Regularly clean the Rotary Extension unit, especially the jaw attachments, to remove dust and debris from engraving. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Điều tra: Periodically inspect the connection cable for any signs of wear or damage.
• Kho: When not in use, store the Rotary Extension in a clean, dry environment, away from direct sunlight and extreme temperatures.

KHAI THÁC. Xử lý sự cố

For further troubleshooting or technical assistance, please refer to the official LaserPecker support resources or contact their customer service.

8. Thông số kỹ thuật

• Compatible Engraver: LaserPecker LP4
• Engravable Object Diameter: 3mm - 200mm
• Supported Object Shapes: Conical, Spherical, Cylindrical, Annular, Irregular Cylinders
• Jaw Attachments: Ring Clip (13-78 mm), Double-step (0-128 mm), Single-step (66-145 mm)
• Điều chỉnh góc: 180° Precise Angle Adjustment
• Kích thước (Xấp xỉ):
  

  Hình 7: Detailed dimensions of the Rotary Extension unit.

9. Bảo hành và Hỗ trợ

For warranty information, product registration, and technical support, please visit the official LaserPecker webtrang web hoặc liên hệ trực tiếp với bộ phận chăm sóc khách hàng. Giữ lại hóa đơn mua hàng để làm bằng chứng mua hàng.

Chính thức Webđịa điểm: www.laserpecker.net (Bán tạiampliên kết le, liên kết thực tế có thể khác)