1. Giới thiệu
This manual provides instructions for the Marvel Legends Series Cyclops X-Men '97 Collectible 6-Inch Action Figure. This figure is designed for display and posing, featuring multiple points of articulation and interchangeable accessories to recreate iconic scenes from Marvel Studios' X-Men '97 animated series.
Please read all instructions carefully before handling the figure and its accessories.
Figure packaging, displaying the Cyclops action figure and included accessories.
2. Thông tin an toàn
CẢNH BÁO: NGUY CƠ NGHẸN – Có thể tạo ra các chi tiết nhỏ. Không dành cho trẻ em dưới 3 tuổi.
- Keep all small parts and accessories away from young children.
- Không được cho các bộ phận vào miệng.
- Nên có sự giám sát của người lớn trong quá trình chơi.
3. Có gì trong hộp
Your Marvel Legends Series Cyclops action figure package includes the following components:
- 1 x Cyclops Action Figure
- 1 x Alternate Head (with yelling expression)
- 1 x Optic Blast FX Accessory
- 3 x Alternate Hands (various poses)
4. Thiết lập và lắp ráp
- Giải nén: Carefully remove the figure and all accessories from the packaging. Ensure no small parts are left behind in the box.
- Attaching Alternate Head: To change the figure's head, gently pull the default head straight up from the neck joint. Align the peg on the alternate head with the hole on the neck joint and push down firmly until it is securely attached.
- Swapping Hands: To change hands, gently pull the existing hand from the wrist joint. Align the peg on the desired alternate hand with the wrist joint and push firmly until it clicks into place.
- Attaching Optic Blast FX: The optic blast effect accessory can be attached to the figure's visor. Carefully align the small peg on the FX accessory with the slot on the visor and push gently until it is secure. Do not force the accessory.
The Cyclops figure in its default standing pose.
5. Vận hành và tạo dáng
The Cyclops action figure features over 20 points of articulation, allowing for a wide range of dynamic poses. Joints include:
- Ball-jointed head and neck
- Shoulder, bicep swivel, double-jointed elbow, and wrist articulation
- Abdominal crunch and waist swivel
- Hip, thigh swivel, double-jointed knee, and ankle articulation
When posing the figure, apply gentle and even pressure to avoid stressing the joints. For stiff joints, refer to the Troubleshooting section.
Cyclops figure demonstrating the optic blast effect in a dynamic pose.
Cyclops figure with the optic blast effect, posed to show the beam extending upwards.
6. Bảo trì
- Vệ sinh: Use a soft, dry cloth to gently wipe dust from the figure. For stubborn dirt, a slightly damp cloth with plain water can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
- Kho: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent discoloration or material degradation. Keep accessories in a safe place to avoid loss.
- Xử lý: Always handle the figure by its main body parts. Avoid pulling or twisting small, delicate parts with excessive force.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Giải pháp |
|---|---|
| Khớp cứng | Gently warm the joint with a hairdryer on a low setting for a few seconds, or immerse the joint area in warm (not hot) water for 30 seconds. Then, carefully attempt to move the joint. Do not force it. |
| Khớp lỏng lẻo | For slightly loose joints, a small amount of clear nail polish or a specialized joint tightener can be applied to the peg, allowed to dry, and then reassembled. This should be done with caution. |
| Difficulty Swapping Parts | If an alternate head or hand is difficult to attach, try warming the receiving joint (neck or wrist) slightly as described for stiff joints. This can make the plastic more pliable. |
8. Thông số kỹ thuật
- Số hiệu mẫu: F9054
- Kích thước sản phẩm: 1.5 x 8.27 x 10.98 inch (Bao bì)
- Trọng lượng sản phẩm: 3.17 ounce
- Tỷ lệ hình ảnh: 6 inch (khoảng 15 cm)
- Độ tuổi khuyến nghị: 4 tuổi trở lên
- Nhà sản xuất: Hasbro
9. Bảo hành và Hỗ trợ
Specific warranty information for this product is typically provided with the purchase receipt or on the manufacturer's official webtrang web. Vui lòng giữ lại bằng chứng mua hàng để yêu cầu bảo hành.
For further assistance, product support, or to inquire about replacement parts, please contact the manufacturer, Hasbro, directly through their official customer service channels.
For additional information regarding Marvel Legends products, you may visit the official Marvel website or the Hasbro webđịa điểm.
