Xnbada RC01RF Wireless 2.4G RF 4-Zone Single Color Remote Control User Manual

1. Giới thiệu

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. Thông tin an toàn

• Đọc kỹ mọi hướng dẫn trước khi sử dụng.
• Thiết bị này chỉ được sử dụng trong nhà.
• Do not expose the remote control to moisture or extreme temperatures.
• Chỉ sử dụng pin AAA theo đúng hướng dẫn. Đảm bảo lắp đúng cực khi lắp pin.
• Để xa tầm tay trẻ em.
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. Nội dung gói hàng

Xác minh rằng tất cả các mục đều có trong gói hàng của bạn:

• Xnbada RC01RF Wireless Remote Control (Single Color)
• Giá treo tường
• Vít lắp (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. Sản phẩm hếtview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• Nút BẬT: Press to turn ON all linked devices.
• Nút TẮT: Press to turn OFF all linked devices.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• Brightness Up (☀): Nhấn để tăng độ sáng.
• Brightness Down (☁): Nhấn để giảm độ sáng.
• Nút M: Cycles through dynamic modes (if supported by the connected controller for single color).
• Độ sáng 30%: Press to set brightness to 30%.
• Độ sáng 60%: Press to set brightness to 60%.
• Độ sáng 100%: Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• S+ Button: Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. Thiết lập

5.1 Lắp đặt pin

The RC01RF remote control requires two AAA batteries (not included).

1. Xác định vị trí nắp ngăn chứa pin ở mặt sau của điều khiển từ xa.
2. Trượt nắp ra.
3. Lắp hai pin AAA, đảm bảo lắp đúng cực (+ và -).
4. Trượt nắp ngăn chứa pin trở lại vị trí cũ cho đến khi nghe thấy tiếng kêu tách.

5.2 Pairing the Remote Control with a Controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 Lắp đặt giá treo tường

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choose a suitable location on a wall or flat surface.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. Khoan lỗ dẫn hướng nếu cần thiết.
4. Secure the wall mount holder to the surface using the provided screws.
5. Cắm điều khiển từ xa vào giá đỡ.

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. Hướng dẫn vận hành

6.1 Basic Control (All Zones)

• BẬT / TẮT: Nhấn nút ON button to turn on all linked lights. Press the TẮT button to turn off all linked lights.
• Điều chỉnh độ sáng: Chạm vào Vòng sáng to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the Tăng độ sáng (☀) Và Giảm độ sáng (☁) buttons for incremental adjustments.
• Preset Brightness: Use the dedicated buttons to quickly set brightness to 30%, 60%, hoặc 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• Chọn một khu vực: Bấm mong muốn Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Control All Zones: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• Nhấn nút Nút M to cycle through available dynamic modes.
• Sử dụng S- Và S+ buttons to decrease or increase the speed of the selected dynamic mode.

7. Bảo trì

7.1 Thay thế pin

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. Hãy làm theo các bước trong Mục 5.1 để mở ngăn chứa pin.
2. Tháo pin AAA cũ ra.
3. Lắp hai pin AAA mới, nhớ lắp đúng cực.
4. Đóng ngăn chứa pin.

Vứt bỏ pin đã qua sử dụng theo quy định của địa phương.

7.2 Vệ sinh

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

KHAI THÁC. Xử lý sự cố

9. Thông số kỹ thuật

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.