1. Giới thiệu
This manual provides comprehensive instructions for the FK Irons Flux Max Wireless Pen Tattoo Machine. It covers essential information regarding setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. The Flux Max is designed for professional tattoo artists, offering advanced features and ergonomic design for precision and comfort.
The FK Irons Flux Max wireless tattoo machine pen offers extended stroke length options, including 3.2mm, 4.0mm, and 4.5mm. It features the PowerBolt II battery pack with an OLED digital display, Bluetooth connectivity, and over 10 hours of tattooing power. The PowerBolt II allows for adjustable give directly on the device, eliminating the need for a mobile app connection. Constructed from 6061 T6 aluminum, the machine incorporates a redesigned ergonomic grip for enhanced control and comfort, with voltage adjustments available in 0.1 increment steps.
2. Các tính năng chính
- Extended Stroke Length Options: Available in 3.2mm, 4.0mm, and 4.5mm for versatile tattooing applications.
- PowerBolt II Battery Pack: Provides over 10 hours of battery life with an OLED digital display.
- Kết nối Bluetooth: Enables advanced features and connectivity.
- Adjustable Give: Control needle give directly from the PowerBolt II without requiring a mobile application.
- Thiết kế công thái học: Features a redesigned grip and forward-weighted balance for maximum control and comfort during extended use.
- Vol chính xáctage Điều chỉnh: Allows for fine-tuning of voltage với gia số 0.1V.
- Kết cấu bền bỉ: Made from high-quality 6061 T6 aluminum.
3. Thông tin an toàn
This device is intended for professional use only by trained and certified tattoo artists. Adherence to local health and safety regulations is mandatory.
- Chỉ sử dụng bên ngoài: The tattoo machine is for external application of tattoo ink to the skin.
- Khử trùng: Ensure all components that come into contact with the skin or ink are thoroughly sterilized before each use. Use appropriate sterilization methods as per industry standards.
- Sử dụng chuyên nghiệp: This equipment is designed for experienced or professional tattoo artists only.
- Nguồn điện: Use only the provided PowerBolt II battery pack or compatible FK Irons power sources.
- Tránh độ ẩm: Keep the device dry. Do not immerse in liquids.
- Xử lý: Dispose of needles and other consumables according to biohazard waste regulations.
4. Thiết lập
4.1 Tháo dỡ và kiểm tra
Carefully unpack all components. Inspect the machine and PowerBolt II for any signs of damage. If any damage is observed, do not use the device and contact your supplier immediately.
4.2 Charging the PowerBolt II
- Connect the provided USB-C charging cable to the PowerBolt II charging port.
- Kết nối đầu còn lại của cáp với bộ chuyển đổi nguồn USB tương thích (không bao gồm).
- The OLED display on the PowerBolt II will indicate charging status. A full charge typically takes approximately 1.5 hours.
- Ensure the PowerBolt II is fully charged before initial use for optimal battery performance.
4.3 Attaching the PowerBolt II to the Machine
- Align the PowerBolt II with the machine body, ensuring the connection points are clean and free of debris.
- Gently push and twist the PowerBolt II onto the machine body until it is securely seated. Do not force the connection.
4.4 Lắp đặt hộp kim
- Đảm bảo máy đã tắt.
- Select a sterile, compatible needle cartridge.
- Insert the needle cartridge into the machine's cartridge receiver, twisting gently until it locks into place.
- Adjust the needle depth by rotating the grip of the machine.
5. Hoạt động
5.1 Bật / Tắt nguồn
- To power on, press and hold the power button on the PowerBolt II until the OLED display illuminates.
- Để tắt nguồn, nhấn và giữ nút nguồn cho đến khi màn hình tắt.
5.2 Điều chỉnh âm lượngtage
- Once powered on, the OLED display will show the current voltage.
- Sử dụng lên (+) và xuống (-) buttons on the PowerBolt II to adjust the voltage với gia số 0.1V.
- Khối lượng vận hành được đề xuấttage range is typically between 5V and 12V, but may vary based on needle configuration and artist preference.
5.3 Adjusting Give
The PowerBolt II allows for direct adjustment of needle give. Refer to the PowerBolt II specific instructions for detailed steps on accessing and modifying give settings via the OLED display menu.
5.4 Kết nối Bluetooth
The Flux Max features Bluetooth connectivity for advanced control and firmware updates via the Darklab app. Consult the Darklab app documentation for pairing instructions and available features.
5.5 Using the Killswitch (Optional)
The FK Irons Killswitch (sold separately) can be paired with the Flux Max for wireless foot pedal control. Follow the Killswitch's pairing instructions to connect it to your machine.
5.6 Video Sản phẩm
Video 1: Sản phẩm chính thức đã ra mắtview of the FK Irons Flux Max, demonstrating its features and design.
6. Bảo trì
6.1 Vệ sinh
- After each use, wipe down the exterior of the machine and PowerBolt II with a sterile wipe or a cloth dampened with an approved disinfectant solution.
- Do not spray cleaning solutions directly into the machine or PowerBolt II.
- Đảm bảo không có chất lỏng nào lọt vào các bộ phận bên trong hoặc cổng sạc.
6.2 Lưu trữ
- Store the machine in a clean, dry environment, away from direct sunlight and extreme temperatures.
- When storing for extended periods, ensure the PowerBolt II is partially charged (around 50%) to preserve battery health.
6.3 Chăm sóc pin
- Tránh xả hết pin thường xuyên.
- Không để pin tiếp xúc với nhiệt độ cao.
- Nếu pin có dấu hiệu hư hỏng hoặc phồng, hãy ngừng sử dụng ngay lập tức và vứt bỏ đúng cách.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Máy không bật. | Battery discharged. PowerBolt II not securely attached. | Charge the PowerBolt II. Reattach the PowerBolt II firmly to the machine body. |
| Inconsistent needle movement. | Loose needle cartridge. Incorrect voltage thiết lập. | Ensure needle cartridge is securely locked. Adjust voltage to recommended range. |
| PowerBolt II not charging. | Faulty cable or adapter. Charging port obstructed. | Try a different USB-C cable and power adapter. Inspect charging port for debris. |
| Sự cố kết nối Bluetooth. | Out of range. App not updated. | Ensure machine is within range of the connected device. Update Darklab app to the latest version. |
If troubleshooting steps do not resolve the issue, please contact FK Irons customer support.
8. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Người mẫu | thông lượng tối đa |
| Thương hiệu | Bàn là FK |
| Độ dài nét vẽ | 3.2mm, 4.0mm, 4.5mm (this model is 4.0mm) |
| Loại pin | Pin Lithium Ion (bao gồm 1 pin) |
| Tuổi thọ pin | Lên đến 10 + giờ |
| Kết nối | Bluetooth |
| Tậptage Điều chỉnh | 0.1V increments |
| Vật liệu | Nhôm 6061 T6 |
| Kích thước sản phẩm | 4.87 x 1.26 x 6 inch |
| Cân nặng | 6.4 ounce |
| Mã số UPC | 810034257093 |
| Nhà sản xuất | Bàn là FK |
9. Bảo hành và Hỗ trợ
For warranty information, please refer to the official FK Irons website or contact their customer service directly. Warranty terms and conditions may vary by region and product.
For technical support, troubleshooting assistance beyond this manual, or inquiries regarding parts and service, please contact FK Irons customer support through their official channels:
- Webđịa điểm: www.fkirons.com
- Thông tin liên lạc: Tham khảo phần "Liên hệ với chúng tôi" trên trang web chính thức webtrang web để biết số điện thoại hoặc hỗ trợ qua email.
