1. Giới thiệu
The DIGITUS DN-45004 Mobile Desktop Charging Cabinet is designed for storing and charging portable devices such as tablets and smartphones. It features 10 USB-C charging ports and an integrated UV-C lamp for enhanced hygiene. This cabinet is suitable for public institutions like schools, providing a centralized and secure location for device management and charging.
2. Cảnh báo an toàn
- This product must be placed on a flat, stable surface to prevent slipping or tipping.
- Ensure the power cable is securely connected to a grounded outlet.
- Không làm quá tải mạch điện.
- Keep the cabinet away from water or excessive moisture.
- Do not attempt to open or repair the cabinet yourself. Refer to qualified service personnel.
- Tia UV-C lamp emits ultraviolet light. Avoid direct exposure to eyes and skin. Ensure the cabinet door is closed during UV-C operation.
3. Nội dung gói hàng
Xác minh rằng tất cả các mục đều có trong gói hàng:
- 1 x Digitus DN-45004 Charging Cabinet
- 2 x Keys for the front door
- 1 x Power Cable (C19 to protective contact plug, 2m)
- 1 x Hướng dẫn sử dụng
4. Thiết lập
- Tháo hộp: Carefully remove the charging cabinet from its packaging.
- Vị trí: Place the cabinet on a flat, stable, and dry surface. Ensure adequate ventilation around the unit. The anti-slip feet provide stability.
- Kết nối nguồn điện: Connect the provided power cable to the C19 input on the rear of the cabinet and then to a suitable electrical outlet (110/220 VAC, 50/60 Hz).
- Kiểm tra nguồn điện ban đầu: If the unit does not power on, check the internal circuit breaker located behind the rear panel. This breaker may trip during transport. To access, unscrew the four screws on the rear panel, remove it, and reset the blue lever on the circuit breaker to the 'On' position.
5. Hướng dẫn vận hành
5.1 Thiết bị sạc
- Mở cửa: Use the provided keys to unlock and open the front door of the cabinet.
- Chèn thiết bị: Place your tablets or smartphones into the designated slots. Note that this cabinet is primarily designed for tablets and smartphones; larger laptops may not fit.
- Connect to USB-C Ports: Connect your devices to the USB-C charging ports located at the front of each slot.
- Theo dõi trạng thái sạc: Integrated LED indicators above each port show the charging status:
- Màu đỏ: Thiết bị hiện đang sạc.
- Màu xanh lá: Charging process is complete, or no device is connected.
- Đóng và khóa: Once devices are connected, close and lock the front door for security.
5.2 UV-C Lamp Hoạt động
The integrated UV-C lamps provide a sterile environment for your devices.
- Activate UV-C: Locate the switch for UV-C lighting (refer to Figure 5.1). Toggle the switch to activate the UV-C lamps.
- Ensure Door is Closed: For safety and effective sanitation, ensure the cabinet door is securely closed while the UV-C lamp đang hoạt động.
- Deactivate UV-C: Toggle the switch again to turn off the UV-C lamps.
5.3 Hệ thống làm mát
The cabinet includes an integrated fan and ventilation slots for active cooling. The fan automatically activates when the internal temperature exceeds 40°C to prevent overheating of devices and internal components.
6. Bảo trì
- Vệ sinh: Ngắt nguồn điện trước khi vệ sinh. Dùng khăn mềm, khô để lau các bề mặt bên ngoài. Không sử dụng chất tẩy rửa có tính ăn mòn hoặc dung môi.
- Thông gió: Ensure ventilation slots are not obstructed to maintain proper airflow.
- UV-CLamp: Tia UV-C lamp has a limited lifespan. If the lamp stops working, contact customer support for replacement options.
KHAI THÁC. Xử lý sự cố
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Cabinet does not power on. | Power cable not connected, power outlet issue, or internal circuit breaker tripped. | Ensure power cable is firmly connected. Test the power outlet. Check and reset the internal circuit breaker (refer to Section 4. Setup). |
| Thiết bị không sạc. | Device not properly connected, faulty USB-C cable, or device issue. | Ensure the device is correctly plugged into the USB-C port. Try a different USB-C cable. Test the device with another charger. Check the LED indicator (should be red when charging). |
| UV-C lamp không bật được. | UV-C switch off, lamp failure, or door not fully closed. | Ensure the UV-C switch is in the 'On' position. Verify the cabinet door is securely closed. If the issue persists, the lamp có thể cần phải thay thế. |
| Laptops do not fit in the slots. | The cabinet is designed for smaller portable devices. | This model is optimized for tablets and smartphones. Please check device dimensions against cabinet specifications. |
8. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Thương hiệu | KỸ THUẬT SỐ |
| Số hiệu mẫu | DN-45004 |
| Màu sắc | Đen (RAL 9005) |
| Vật liệu | Thép hợp kim |
| Kích thước (C x R x S) | 345 x 360 x 370mm |
| Internal Shelf Depth | 294mm |
| Cổng sạc USB-C | 10 |
| USB-C Output per Port | 18 W (5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A) |
| Max USB-C Output | 180W |
| Đầu vào nguồn điện | C19; 110 / 220 VAC, 50/60 Hz, 16 A |
| Tổng sản lượng điện | 3500W |
| Làm mát | Integrated fan, automatic activation at >40°C |
| Bảo vệ | Steel front door with 3-point lock |
| Tính năng đặc biệt | UV-C lamps for hygiene, LED charging indicators |
| Thiết bị tương thích | Điện thoại thông minh, Máy tính bảng |
9. Bảo hành và Hỗ trợ
Warranty information for the Digitus DN-45004 Mobile Desktop Charging Cabinet is not available in the provided product data. Please refer to the manufacturer's official website or your point of purchase for detailed warranty terms and conditions.
For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact DIGITUS customer service directly. You can often find contact information on the manufacturer's webtrang web hoặc trong bao bì sản phẩm.
For more information about DIGITUS solutions, visit: Assmann Solutions
