Feit Electric S10.5TFL/850/MOT/WH

Feit Electric LED Security Light Instruction Manual

Model: S10.5TFL/850/MOT/WH

1. Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH). This outdoor flood light features an adjustable three-head design, motion sensor, and dusk-to-dawn functionality, providing 5000 lumens of 5000K Daylight illumination.

Vui lòng đọc kỹ hướng dẫn này trước khi lắp đặt và giữ lại sách hướng dẫn này để tham khảo trong tương lai.

2. Thông tin an toàn

CẢNH BÁO: Nguy cơ điện giật. Ngắt nguồn điện tại cầu chì hoặc cầu dao trước khi lắp đặt hoặc bảo dưỡng.

  • Ensure the electrical supply is turned off before beginning installation.
  • Sản phẩm này phải được lắp đặt theo đúng quy định lắp đặt hiện hành bởi người am hiểu về cấu tạo, vận hành sản phẩm cũng như các mối nguy hiểm liên quan.
  • Use only UL/cUL listed wire connectors.
  • Không được cố gắng sửa đổi thiết bị. Bất kỳ sửa đổi nào cũng có thể làm mất hiệu lực bảo hành và gây nguy hiểm cho an toàn.
  • The LED light source is integrated and cannot be replaced.

3. Nội dung gói hàng

Kiểm tra kỹ xem tất cả các bộ phận đã đầy đủ trước khi bắt đầu lắp đặt:

  • 1 x Feit Electric LED Security Light (Model S10.5TFL/850/MOT/WH)
  • Phần cứng lắp đặt (vít, đai ốc dây)
Feit Electric LED Security Light product box

Image 3.1: Packaging of the Feit Electric LED Security Light, showing the product and key features.

4. Hướng dẫn cài đặt

This fixture is designed for wall-mount installation and requires hardwiring.

4.1 Các công cụ cần thiết (Không bao gồm)

  • Tuốc nơ vít đầu Phillips
  • Vũ nữ thoát y dây
  • Kìm
  • Băng điện
  • Kính an toàn

4.2 Gắn thiết bị

  1. Tắt nguồn ở cầu dao hoặc hộp cầu chì.
  2. Remove the existing fixture (if applicable) and its mounting bracket.
  3. Attach the new mounting plate to the junction box using the provided screws. Ensure the plate is securely fastened.
  4. Luồn dây điện từ hộp nối qua lỗ ở giữa tấm gắn.
Hands-Free Wiring - Mounting Back Plate diagram

Image 4.1: Diagram illustrating the hands-free wiring and mounting back plate for easy installation.

4.3 Wiring the Fixture

  1. Nối dây màu đen từ đèn với dây màu đen (dây nóng) từ hộp nối dây bằng một đầu nối dây.
  2. Nối dây màu trắng từ đèn với dây màu trắng (dây trung tính) từ hộp nối dây bằng một đầu nối dây.
  3. Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box using a wire nut.
  4. Cẩn thận nhét tất cả các dây vào hộp nối.

4.4 Cố định thiết bị cố định

  1. Align the fixture with the mounting plate and secure it with the provided screws.
  2. Ensure the fixture is flush against the mounting surface to prevent water intrusion.
  3. Adjust the three light heads to direct illumination as desired. The heads are adjustable to provide up to 270 degrees of light coverage.
Feit Electric LED Security Light with adjustable heads and motion sensor controls

Image 4.2: The security light showing its adjustable heads and the motion and dusk-to-dawn sensor controls.

Feit Electric LED Security Light installed on a house at night

Image 4.3: The Feit Electric LED Security Light installed on an exterior wall, providing bright illumination at night.

5. Hướng dẫn vận hành

This security light features both a motion sensor and a dusk-to-dawn sensor for automated operation.

5.1 Chức năng cảm biến chuyển động

  • The integrated motion sensor detects movement up to 60 feet away.
  • When motion is detected at night, the light will activate.
  • The duration the light stays on after motion detection can be adjusted using the 'TIMER' dial on the sensor.
  • The sensitivity of the motion sensor can be adjusted using the 'SENSITIVITY' dial to control the detection range.

5.2 Dusk-to-Dawn Functionality

  • The built-in photocell sensor automatically turns the light on at dusk and off at dawn.
  • This feature works in conjunction with the motion sensor, ensuring the light only activates when needed during nighttime hours.
  • An 'Auto Dusk 'til Dawn override' feature is available, allowing the fixture to remain on continuously from dusk to dawn if desired. Consult the sensor control diagram for specific settings.
Dusk to Dawn feature comparison for Feit Electric LED Security Light

Image 5.1: Comparison showing the Feit Electric LED Security Light operating with its Dusk-to-Dawn feature, turning on automatically at night and off at dawn.

5.3 Điều chỉnh độ sáng

The light output is dimmable from 500 lumens to 5000 lumens. This adjustment is typically controlled via the sensor unit, allowing you to set the desired brightness level for your security needs.

Wide-Beam Optics diagram for Feit Electric LED Security Light

Image 5.2: Diagram illustrating the wide-beam optics of the security light, showing effective illumination distances at various heights.

6. Bảo trì

The Feit Electric LED Security Light is designed for long-lasting, maintenance-free operation. The integrated LEDs have an average life of 50,000 hours and do not require replacement.

6.1 Vệ sinh

  • To clean the fixture, ensure power is off at the circuit breaker.
  • Lau sạch bên ngoài bằng một miếng vải mềm, damp vải. Không sử dụng chất tẩy rửa hoặc dung môi có tính mài mòn vì chúng có thể làm hỏng lớp hoàn thiện hoặc các bộ phận điện.
  • Keep the motion sensor lens clean to ensure optimal performance.
Feit Electric LED Security Light with text 'Stands up to the Elements'

Image 6.1: The security light is shown enduring rain, highlighting its all-weather cast aluminum housing and wet-location rating (IP65).

KHAI THÁC. Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Đèn không bật.No power; faulty wiring; sensor settings.Check circuit breaker. Verify wiring connections. Adjust sensor 'SENSITIVITY' and 'TIMER' dials. Ensure it is dark enough for dusk-to-dawn sensor to activate.
Đèn sáng liên tục.Sensor in override mode; continuous motion detected; faulty sensor.Check sensor settings for 'Auto Dusk 'til Dawn override'. Ensure no constant motion in detection zone. If problem persists, sensor may be faulty.
Cảm biến chuyển động không phát hiện được.Incorrect sensitivity setting; obstruction; sensor malfunction.Increase 'SENSITIVITY' setting. Clear any obstructions from the sensor's view. Ensure sensor is aimed correctly.
Ánh sáng nhấp nháy.Loose wiring; power fluctuations.Turn off power and check all wiring connections for tightness. Consult an electrician if power fluctuations are suspected.

8. Thông số kỹ thuật

Tính năngĐặc điểm kỹ thuật
Số hiệu mẫuS10.5TFL/850/MOT/WH
Cái gì?tage46W
Độ sáng500-5000 Lumen (Có thể điều chỉnh độ sáng)
Nhiệt độ màu5000K Ánh sáng ban ngày
Giờ cuộc sống50,000 giờ
Tậptage120 vôn
Xếp hạng IPXếp hạng ướt IP65
Dải cảm biến chuyển độngLên đến 60 feet
Góc chùm tiaLên đến 270 độ
Vật liệuAluminum Housing, Polycarbonate Lens
Kích thước (D x R x C)7.6" x 8.8" x 9.7" (Product Dimensions)
Cân nặng1.32 pound
Chứng nhậnNgôi sao năng lượng
Feit Electric LED Security Light Specifications diagram

Image 8.1: Visual representation of key specifications including dimensions, CCT, wattage, brightness, life hours, IP rating, and voltage.

Feit Electric LED Security Light with Energy Star logo

Image 8.2: The security light installed on a garage, featuring the Energy Star certification logo, indicating energy efficiency.

9. Bảo hành và Hỗ trợ

9.1 Thông tin bảo hành

According to the product information, there is no specific warranty description provided for this product.

9.2 Hỗ trợ khách hàng

For technical assistance or further inquiries, please visit the Feit Electric website or contact their customer service department. Refer to the product packaging for the most current contact information.

Tài liệu liên quan - S10.5TFL/850/MOT/WH

Trướcview Hướng dẫn sử dụng ứng dụng Feit Electric cho Camera an ninh đèn pha
Hướng dẫn sử dụng toàn diện cho ứng dụng Feit Electric, hướng dẫn chi tiết cách thiết lập và vận hành Camera an ninh Flood Light. Tìm hiểu cách kết nối Wi-Fi, đăng ký thiết bị và sử dụng các tính năng như phát hiện chuyển động, tầm nhìn ban đêm và giao tiếp hai chiều. Bao gồm hướng dẫn tích hợp với Siri Shortcuts, Alexa và Google Assistant.
Trướcview Hướng dẫn lắp đặt và vận hành đèn pha an ninh cảm biến chuyển động hai đầu Feit Electric Model 73719
Hướng dẫn này cung cấp các chỉ dẫn chi tiết về việc lắp đặt và vận hành đèn pha an ninh cảm biến chuyển động hai đầu Feit Electric Model 73719. Nó bao gồm các nội dung về bảo dưỡng, sửa chữa, khắc phục sự cố, cảnh báo an toàn và các chế độ hoạt động như phát hiện chuyển động và chức năng tự động bật/tắt theo ánh sáng ban ngày/ban đêm.
Trướcview Hướng dẫn lắp đặt và khắc phục sự cố đèn pha an ninh cảm biến chuyển động hai đầu Feit Electric
Hướng dẫn lắp đặt và khắc phục sự cố cho đèn pha an ninh cảm biến chuyển động kép Feit Electric (Model S10.5DFL/850/MOT/BZ). Tìm hiểu về cách chăm sóc, bảo trì và các vấn đề thường gặp.
Trướcview Hướng dẫn lắp đặt đèn pha an ninh thương mại Feit Electric S4.5CSFL/850/BZ
Hướng dẫn lắp đặt và chi tiết bảo hành cho đèn pha an ninh thương mại Feit Electric S4.5CSFL/850/BZ. Bao gồm cảnh báo an toàn, danh sách linh kiện, tuân thủ FCC và hướng dẫn lắp đặt hộp nối J-box từng bước.
Trướcview Đèn pha an ninh Feit Electric 73704: Hướng dẫn an toàn và lắp đặt.
Hướng dẫn toàn diện này sẽ giúp bạn lắp đặt đèn pha an ninh Feit Electric 73704 một cách an toàn và chính xác. Bao gồm các cảnh báo an toàn quan trọng, danh sách linh kiện, các bước lắp đặt và thông tin đấu dây.
Trướcview Feit Electric S6.8CSFL840/LSDD/BZ Single Head Commercial Security Flood Light Use and Care Guide
Comprehensive use and care guide for the Feit Electric S6.8CSFL840/LSDD/BZ Single Head Commercial Security Flood Light, including installation instructions, safety information, troubleshooting, and warranty details.