1. Sản phẩm hếtview
The Daytech Wireless Caregiver Pager System is designed to provide quick and efficient communication between a patient or elderly individual and their caregiver. This system enhances independence for the user while offering peace of mind to family members and caregivers. It is suitable for use in private households, hospitals, and nursing homes.
Figure 1: Daytech Wireless Caregiver Pager System components, including two plug-in receivers and one watch-style call button.
2. Nội dung gói hàng
- 1 x Wireless Watch Pager
- 2 bộ thu cắm ngoài
- 1 x Call Button (with lanyard and double-sided patch)
- 1 x Small Screwdriver (for battery replacement)
- 3 x AAA Batteries (included, for call button)
3. Hướng dẫn thiết lập
3.1 Initial Setup and Powering On
- Thiết lập máy thu: Plug the receiver unit into a standard electrical outlet. The receiver will power on automatically.
- Call Button Battery Installation: The call button requires 3 AAA batteries (included). Use the provided small screwdriver to open the battery compartment, insert the batteries, and securely close the compartment.
- Watch Pager: The watch pager comes with a pre-installed battery and is ready for use.
3.2 Modifying Ringtone and Pairing
The system comes pre-paired with standard factory settings. If you wish to change the ringtone or re-pair units, follow these steps:
Figure 2: Steps for ringtone selection and pairing.
- Cắm vào bộ thu: Ensure the receiver is plugged into a power socket.
- Chọn nhạc chuông: On the receiver, press the 'Forward' or 'Backward' buttons to cycle through the 20 available ringtones until you find your preferred sound.
- Vào Chế độ Ghép nối: Press and hold the 'Volume Control' button on the receiver until it makes a "ding-dong" sound. This indicates the receiver is in pairing mode.
- Pair Transmitter: While the receiver is in pairing mode, press the call button on the watch pager or the separate call button. The receiver will make another "ding-dong" sound, confirming successful pairing.
3.3 Call Button Installation Options
The call button can be used in various ways for convenience and accessibility:
- Đeo quanh cổ: Attach the included lanyard to the call button for easy access.
- Đeo trên cổ tay: The watch pager is designed to be worn on the wrist.
- Fix on Wall: Use the provided 3M double-sided patch to affix the call button to a wall, such as in a bathroom or by a bedside. The call button unit is splash-proof (IP55 rated).
Figure 3: Versatile placement options for the call button.
4. Hướng dẫn vận hành
Using the Daytech Caregiver Pager System is straightforward:
- Bắt đầu cuộc gọi: When assistance is needed, simply press the large 'SOS' button on the watch pager or the 'CALL' button on the separate call button.
- Receiving an Alert: The paired receiver(s) will sound the selected ringtone and may flash an indicator light, alerting the caregiver.
- Điều chỉnh âm lượng: The receiver has a volume control button to adjust the alert sound level. There are 5 volume levels available, up to 110 dB.
Figure 4: Key features of the watch pager.
The system offers a working range of up to 100ft/30m indoors, allowing caregivers freedom of movement within the home.
Figure 5: Wireless range illustration.
5. Bảo trì
5.1 Battery Replacement for Call Button
The call button is powered by 3 AAA batteries. When the signal weakens or the button stops responding, it's time to replace the batteries. Use the provided small screwdriver to open the back cover, replace the old batteries with new ones, and secure the cover.
Video 1: Instructions on how to attach the lanyard and replace the battery in the call button.
5.2 Chăm sóc chung
- Giữ thiết bị sạch sẽ bằng cách lau chúng bằng vải mềm, khô.
- Avoid exposing the watch pager and call button to excessive moisture or immersion in water. While the call button is splash-proof, it is not designed for submersion.
- Khi không sử dụng trong thời gian dài, hãy bảo quản hệ thống ở nơi khô ráo, thoáng mát.
KHAI THÁC. Xử lý sự cố
- Không nhận được cảnh báo từ bộ thu:
- Hãy đảm bảo rằng thiết bị thu được đã được cắm đúng cách vào ổ cắm điện đang hoạt động.
- Check if the call button or watch pager battery needs replacement.
- Verify that the call button/watch pager is paired with the receiver (refer to Section 3.2).
- Ensure the devices are within the operational range (up to 100ft/30m). Walls and other obstacles can reduce range.
- Weak Signal or Intermittent Alerts:
- Relocate the receiver to a more central location or closer to the user.
- Kiểm tra xem có khả năng gây nhiễu từ các thiết bị điện tử khác hay không.
- Replace batteries in the call button/watch pager.
- Ringtone Not Changing:
- Follow the ringtone selection steps carefully (Section 3.2).
- Ensure you are pressing the correct 'Forward' or 'Backward' buttons.
7. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Thương hiệu | Daytech |
| Số hiệu mẫu | lc01 1-2w us |
| Phạm vi tối đa | 800 Feet (Note: Practical indoor range is typically up to 100ft/30m due to obstacles) |
| Mức độ tiếng ồn | Lên đến 110 dB |
| Phương pháp kiểm soát | Chạm |
| Kiểu lắp đặt | Wall Mount (for call button) |
| Nguồn điện (Bộ thu) | Plug-in (260 Volts) |
| Nguồn điện (Nút gọi) | 3 pin AAA (có kèm theo) |
| Kích thước sản phẩm | 3.15 x 1.97 x 4.72 inch |
| Trọng lượng sản phẩm | 9.1 ounce |
8. Bảo hành và Hỗ trợ
Daytech provides a full year's warranty and a money-back guarantee for this product. Round-the-clock customer service is available to assist with any queries or issues you may encounter.
For further assistance, please refer to the official Daytech webtrang web hoặc liên hệ trực tiếp với bộ phận hỗ trợ khách hàng của họ.
