Sách hướng dẫn sử dụng máy khắc laser SCULPFUN S30

1. Giới thiệu

The SCULPFUN S30 is a 5W diode laser engraver and cutter designed for precision work on a variety of materials. It features an automatic air assist system, an industrial-grade X-axis guide rail, and a robust frame, making it suitable for both engraving and cutting tasks. This manual provides essential information for the safe and effective operation of your SCULPFUN S30.

Figure 1.1: SCULPFUN S30 Laser Engraver with exampcác vật liệu được khắc và cắt.

2. Hướng dẫn an toàn

Operating a laser engraver involves inherent risks. Adhere strictly to the following safety precautions to prevent injury or damage.

• Bảo vệ mắt: Always wear the provided laser protective eyewear when the machine is in operation. The laser is Class IV and can cause severe eye damage.
• Hoạt động không giám sát: Do not leave the machine running unattended. Constant supervision is required during operation.
• Thông gió: Vận hành máy ở nơi thông gió tốt để tản khói và hơi sinh ra trong quá trình khắc và cắt.
• An toàn vật liệu: Only engrave or cut materials specified as safe. Avoid materials that produce toxic fumes or are highly flammable.
• Dừng khẩn cấp: Làm quen với vị trí và cách sử dụng nút dừng khẩn cấp.
• Trẻ em và vật nuôi: Giữ trẻ em và vật nuôi tránh xa khu vực phẫu thuật.

Figure 2.1: The limit switch mechanism, featuring a caution label advising against unattended operation.

3. Tính năng sản phẩm

The SCULPFUN S30 incorporates several advanced features for enhanced performance and user experience:

• Hệ thống hỗ trợ khí nén tự động: Equipped with a 32-bit automatic air assist motherboard and an air pump, intelligently controlled via LightBurn software (M8 button). This system significantly improves cutting efficiency and cleanliness by blowing away debris.
• High-Pressure Air-Assisted Nozzle: Generates a high-pressure airflow of 30L/min, accelerating cutting speed by over 5 times compared to operations without air assist. Ensures clean cut surfaces.
• Industrial X-Axis Guide Rail: Features a precision industrial-grade X-axis guide rail, ensuring stable and accurate engraving and cutting without ripple patterns, even on small details.
• Khung chắc chắn và bền bỉ: Constructed from high-strength aluminum alloy, the frame can withstand up to 50KG of weight, ensuring long-term durability and precision. The modular design allows for future laser upgrades.
• Khả năng tương thích vật liệu đa năng: Capable of engraving wood, MDF, zigzag, cardboard, plastic, rust, circuit board, aluminum oxide, 304 stainless steel, ceramics, and dark stone. It can cut black acrylic sheet, cardboard, non-woven fabric, bamboo sheet, leather, and certain plastic panels.

Figure 3.1: The automatic air pump, a key component for efficient cutting and engraving.

Figure 3.2: Visual comparison demonstrating the benefits of automatic air assist for clean edges and cuts.

4. Nội dung gói hàng

Xác minh rằng tất cả các thành phần được liệt kê dưới đây đều có trong gói của bạn:

• SCULPFUN S30 Laser Engraver Frame Components
• Mô-đun Laser (5W)
• Automatic Air Assist Pump
• Air Nozzle and Tubing
• 32-bit Air Assist Mainboard
• Limit Switches (X and Y axis)
• Bộ đổi nguồn và cáp
• Cáp USB
• Laser Protective Eyewear
• Fixed Focus Column
• Sample Vật liệu thử nghiệm
• Công cụ lắp ráp
• Hướng dẫn sử dụng (tài liệu này)

Hình 4.1: Hếtview of all components included in the SCULPFUN S30 package.

5. Hướng dẫn lắp ráp

Follow these steps to assemble your SCULPFUN S30 laser engraver. Refer to the detailed assembly guide provided in the box for visual instructions.

1. Giải nén các thành phần: Cẩn thận lấy tất cả các bộ phận ra khỏi bao bì và đối chiếu với danh sách các bộ phận có trong gói hàng.
2. Lắp ráp khung: Connect the aluminum alloy frame components according to the diagrams in the separate assembly guide. Ensure all screws are tightened securely.
3. Install X-Axis Guide Rail: Mount the X-axis guide rail onto the frame, ensuring smooth movement.
4. Attach Laser Module: Secure the laser module to the gantry. Connect the necessary cables.
5. Install Air Assist System: Connect the air pump to the air nozzle and route the tubing. Ensure the nozzle is correctly positioned near the laser output.
6. Mount Limit Switches: Install the X and Y axis limit switches. These are crucial for homing and precise positioning. Users can choose to install or not install them based on their needs, but installation is recommended for repeated positioning accuracy.
7. Connect Mainboard: Connect all motor, laser, and limit switch cables to the 32-bit air assist mainboard.
8. Kết nối nguồn điện: Connect the power adapter to the machine and then to a power outlet.

6. Cài đặt phần mềm và kết nối

The SCULPFUN S30 supports various operating software. LightBurn is recommended for full functionality, especially for automatic air assist control.

• Phần mềm được hỗ trợ: LightBurn (recommended for M8 air assist control), LaserGRBL, Benbox, GrblController, LiteFire.
• Hệ điều hành: Supports Windows and MAC systems.
• File Định dạng: Compatible with NC, BMP, JPG, PNG, DXF, and other image formats.

6.1. Cài đặt phần mềm

1. Tải chương trinh: Obtain the latest version of LightBurn or LaserGRBL from their official webcác trang web.
2. Cài đặt trình điều khiển: Follow the software's instructions to install any necessary drivers for your operating system.
3. Khởi chạy phần mềm: Open the installed software.

6.2. Connecting the Engraver

1. Bật nguồn: Ensure the engraver is powered on.
2. Kết nối USB: Kết nối máy khắc với máy tính bằng cáp USB được cung cấp.
3. Lựa chọn cổng: In the software, select the correct COM port for your engraver.
4. Thiết lập ban đầu: Follow any on-screen prompts within the software for initial device setup and configuration.

Figure 6.1: The 32-bit air assist mainboard, supporting automatic air assist control and future wireless upgrades.

7. Hoạt động cơ bản

This section outlines the fundamental steps for engraving and cutting.

7.1. Bố trí vật liệu

Place the material to be engraved or cut flat on the working surface. Ensure it is stable and does not move during operation.

7.2. Điều chỉnh tiêu điểm tia laser

The S30 uses a fixed focus column and sliding device for focusing. Position the laser module over the material and adjust its height until the laser beam is at its smallest point on the material surface. This ensures optimal engraving and cutting performance.

Figure 7.1: Illustration of the 0.06 x 0.06 mm laser focus and beam shaping technology.

7.3. Chuẩn bị bản thiết kế của bạn

Import your design into the software (e.g., LightBurn). Adjust parameters such as power, speed, and number of passes according to the material type and desired outcome. For automatic air assist, ensure the M8 command is enabled in LightBurn for cutting operations.

7.4. Bắt đầu hoạt động

Once the design is prepared and the laser is focused, initiate the engraving or cutting process from the software. Monitor the machine closely throughout the operation.

8. Bảo trì

Regular maintenance ensures the longevity and optimal performance of your SCULPFUN S30.

• Làm sạch thấu kính laser: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
• Dọn sạch các mảnh vụn: Remove any accumulated dust, debris, or material residue from the machine's frame, rails, and working area after each use.
• Lubricate Rails: Apply a small amount of lubricant to the X and Y axis guide rails periodically to ensure smooth movement.
• Kiểm tra kết nối: Ensure all electrical and air assist connections are secure and free from damage.
• Air Pump Filter: If applicable, check and clean or replace the air pump filter to maintain optimal airflow.

KHAI THÁC. Xử lý sự cố

Phần này giải quyết những vấn đề phổ biến mà bạn có thể gặp phải.

10. Thông số kỹ thuật

11. Bảo hành và Hỗ trợ

For warranty information and technical support, please refer to the documentation included with your product or visit the official SCULPFUN webtrang web. Giữ lại biên lai mua hàng làm bằng chứng mua hàng khi yêu cầu bảo hành.