Veise KS02D Fingerprint Keyless Entry Door Lock Set Instruction Manual

Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your Veise KS02D Fingerprint Keyless Entry Door Lock Set. Please read this guide thoroughly before installation and use to ensure proper functionality and security.

Những gì bao gồm

Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt:

• Khóa cửa vân tay
• Bộ cầm tay
• Xử lý đòn bẩy
• Hướng dẫn (sách hướng dẫn này)
• Hướng dẫn sử dụng (sách hướng dẫn này)
• Chốt cửa
• Đánh đập
• 2 chìa khóa dự phòng
• Tấm gắn
• Vít

Sản phẩm trênview

Các tính năng chính:

• Nhiều phương pháp mở khóa: Supports up to 20 fingerprints, 20 passwords, and 2 physical keys. One-time passwords can be generated for temporary access.
• Nhận diện vân tay nhanh chóng: Built-in sensor with 99.99% recognition rate and 500 DPI resolution, unlocking in approximately 1 second.
• Khóa tự động & Khóa một chạm: Configurable auto-lock delay (10-99 seconds). Instant locking by pressing and holding any key for 2 seconds from the outside.
• Kết cấu bền bỉ: Made from solid, premium zinc alloy, ANSI Grade 3 and BHMA tested, with IP54 water and dust resistance. Tested over 200,000 cycles.
• Anti-Peeping & Intrusion Protection: Decoy digits can be added before or after the actual code. The lock disables for 3 minutes after 10 incorrect entries.
• Long Battery Life & Alerts: Operates on 4 AA batteries (not included) for over a year. Features a low-battery alert on the backlit keypad.
• Chế độ nghỉ phép: Disables all user codes except the master password and triggers an alarm if opened from inside using the thumb turn.
• Chế độ im lặng: Mutes keypad tones for quiet operation, while still allowing low-battery and security alerts to be audible.

Door Compatibility & Dimensions

Before installation, confirm your door dimensions and type:

• Độ dày cửa: Từ 1-3/8" đến 2" (35mm-50mm)
• Hole Diameter (Main): 2-1/8" (54mm)
• Quay lại: 2-3/8" hoặc 2-3/4" (60mm hoặc 70mm)
• Hole Diameter (Latch): 3/8" (10mm)
• Minimalist Distance (between holes): 4" (101.6mm) - Cannot be installed if less than 4"
• Chiều dài tay cầm: 7-7/8" to 9-7/8" (200mm-225mm)

The lock is suitable for U.S. standard left and right-handed doors. Ensure your door has a chiseled latch hole and is a single cylinder type. It is not compatible with Mortise, Integrated, or Rim Cylinder lock types.

Image: Detailed diagram showing door lock dimensions, hole diameters, backset, and compatibility for left-handed and right-handed doors, including warnings for incompatible door types.

Image: Visual guide to check door size before purchase, illustrating hole diameter, backset, spacing between holes, and door thickness requirements.

Hình ảnh: Examples of incompatible 3-hole spacing that will prevent installation, highlighting minimum distance requirements.

Image: Visual guide for checking latch hole type (chiseled vs. not chiseled) and door compatibility (single cylinder vs. mortise/integrated/rim cylinder).

Cài đặt

Cài đặt:

The Veise KS02D lock set is designed for quick, tool-friendly installation. Only a screwdriver is typically required. Follow the detailed instructions provided in the included user manual for visual assistance.

Lắp đặt pin:

The lock requires 4 AA batteries (not included). When installing batteries, ensure you press and hold the reset button before inserting the last battery. The lock mechanism will automatically adjust to the correct locking position.

Programming Fingerprints and Passcodes:

The lock supports up to 20 fingerprints and 20 passcodes. Refer to the "Quick Set Up" section in your physical manual for detailed programming steps. Generally, programming involves pressing the top button twice, entering the master code, pressing the top button again, and then following the prompts for adding fingerprints (scanning 8 times) or user codes.

Image: Illustrates the capacity for up to 20 fingerprints and codes, including one-time codes for various users like family, friends, pet sitters, and repairmen.

Hướng dẫn sử dụng

Phương pháp mở khóa:

• vân tay: Place your registered fingerprint on the sensor. The lock will unlock in approximately 1 second.
• Mật mã: Enter your programmed 4-8 digit passcode on the keypad.
• Khóa vật lý: Use one of the two provided backup keys to manually unlock the deadbolt.
• One-Time Codes: Generate temporary codes for guests or service providers. These codes expire after a single use.

Image: Close-up of the fingerprint sensor on the Veise KS02D lock, highlighting 0.3s biometric identification, 99.9% recognition rate, and 500 DPI resolution.

Image: Illustration of the one-time password feature, showing a person receiving a code via phone and another person using it to enter the home.

Phương pháp khóa:

• Tự động khóa: The smart keypad can be set to automatically lock 10-99 seconds after the door closes.
• Khóa một chạm: From the outside, press and hold any key on the keypad for 2 seconds to instantly lock the door.

Image: Depicts the auto-lock feature with a timer (10-99s) and a person leaving the house, indicating the lock will automatically engage.

Chế độ đặc biệt:

• Chế độ nghỉ phép: Disables all user codes except the master password. An alarm will trigger if the lock is opened from the inside using the thumb turn.
• Chế độ im lặng: Mutes keypad tones for quiet operation, while still allowing low-battery and security alerts to be audible.

Mật khẩu chống nhìn trộm:

To prevent others from guessing your code, you can enter random digits before or after your actual passcode. The lock will still recognize the correct sequence within the longer string of numbers.

BẢO TRÌ

Thay thế pin:

The lock will provide a clear low-battery alert on the backlit keypad when the batteries are running low. Replace all 4 AA batteries promptly to ensure continuous operation. Always use fresh, high-quality alkaline batteries.

Vệ sinh:

Clean the keypad and fingerprint sensor with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.

Xử lý sự cố

• Khóa không phản hồi: Kiểm tra mức pin. Thay pin nếu yếu.
• Giới hạn số lần nhập không chính xác: After 10 incorrect entries, the lock will shut down for 3 minutes to deter unauthorized access. Wait for the lockout period to end before trying again.
• Dấu vân tay không được nhận dạng: Đảm bảo ngón tay của bạn sạch và khô. Hãy thử đăng ký lại dấu vân tay nếu sự cố vẫn tiếp diễn.
• Chức năng khóa tự động không hoạt động: Verify that the auto-lock feature is enabled and the delay time is set correctly in the programming settings.
• Door Handle Issues: If the door handle does not operate smoothly, check for proper alignment and installation. The adjustable design of the handle should accommodate most standard door setups.

Thông số kỹ thuật

Bảo hành & Hỗ trợ

Veise offers a 2-year full-unit warranty and lifetime maintenance for mechanical components. For assistance, please contact Veise customer support:

• Hỗ trợ qua điện thoại: Available Monday-Friday 9 AM-5 PM PST, and Saturday 7 AM-3 PM PST.
• Dịch vụ Email: 24/7 email support from the Veise professional team.

Image: Graphic detailing US-based support hours and contact information for Veise products.