xTool 1064nm Infrared Laser Module for D1 Pro Instruction Manual

1. Giới thiệu

The xTool 1064nm Infrared Laser Module is designed to enhance the capabilities of your xTool D1 Pro laser engraver, specifically for engraving on various metals and plastics. This module features a 0.03mm ultra-fine laser spot and 15KW peak power, enabling precise and detailed work on materials typically challenging for blue diode lasers.

This manual provides essential information for the safe and effective use of your laser module, including setup, operation, and maintenance guidelines.

2. Biện pháp phòng ngừa an toàn

• Always wear safety goggles: Infrared lasers are invisible and can cause severe eye damage. Ensure appropriate laser safety goggles are worn by all individuals in the operating area.
• Thông gió: Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving.
• Vật liệu dễ cháy: Avoid engraving flammable materials or operating near combustible substances.
• Hoạt động không giám sát: Never leave the device unattended while it is working.
• Tắt nguồn: Always power off and unplug the device before performing any maintenance or module changes.

3. Hướng dẫn cài đặt

3.1 Mở hộp và các thành phần

Trước khi bắt đầu, hãy đảm bảo tất cả các thành phần đều có đủ:

• xTool 1064nm Infrared Laser Module
• Kính bảo hộ
• Công cụ vệ sinh
• xTool D1 Pro (main unit, sold separately)
• Laptop with xTool Creative Space software
• RA2 Pro Rotary Attachment (optional, for cylindrical objects)

3.2 Lắp đặt mô-đun Laser

The 1064nm Infrared Laser Module is designed for quick and easy installation on your D1 Pro. This process involves replacing the existing laser module.

1. Remove Existing Module: Loosen the toggle screw on the current laser module. Gently pull the module upwards to detach it from the machine. Disconnect the cable from the top of the module.
2. Connect New Module: Connect the cable to the top of the 1064nm Infrared Laser Module.
3. Cài đặt mô-đun mới: Insert the new module into the machine's carriage. Tighten the toggle screw to secure it in place.

Hình ảnh: One-step installation of the xTool 1064nm Infrared Laser Module. This image illustrates the simple process of installing the laser module onto the D1 Pro, highlighting its ease of setup.

3.3 Connecting RA2 Pro (for Rings)

For engraving cylindrical objects like rings, the RA2 Pro rotary attachment is required. Ensure the honeycomb panel is removed and the D1 Pro is raised to accommodate the RA2 Pro.

1. Prepare RA2 Pro: Secure the ring onto the appropriate pillars of the RA2 Pro, ensuring it is stable.
2. Connect RA2 Pro: Disconnect the Y-axis motor cable from the D1 Pro. Connect the RA2 Pro cable to the Y-axis port on the D1 Pro.
3. Place RA2 Pro: Position the RA2 Pro onto the D1 Pro's working area.

4. Hướng dẫn vận hành

4.1 Khả năng tương thích vật liệu

The 1064nm Infrared Laser Module is specifically designed for engraving on a wide range of materials, including:

• Kim loại: Gold, Silver, Platinum, Copper, Aluminum, Zinc, Titanium, Iron, Stainless Steel, Metal Oxides, and Alloys.
• Nhựa: Various types of plastic and acrylic, including opaque plastic and opaque acrylic.
• Các vật liệu khác: Leather, Painted Ceramics, Rock, Glass, Circuit Boards, Paper.

Hình ảnh: Engraving on Most Metals. This image showcases the module's capability to engrave on different metal types, including gold, silver, copper, and aluminum.

Hình ảnh: Diverse Material Compatibility. This image displays a wide array of materials that can be engraved with the 1064nm laser module, from various metals to plastics, leather, and more.

4.2 Tập trung tia laser

Accurate focusing is crucial for optimal engraving results.

1. Lower Setting Bar: Pull down the setting bar located on the side of the laser module.
2. Điều chỉnh chiều cao: Loosen the toggle screw and move the laser module up or down until the tip of the setting bar just touches the highest surface of your material.
3. Mô-đun bảo mật: Tighten the toggle screw to lock the module in place.
4. Retract Setting Bar: Push the setting bar back up into its original position.

4.3 Using xTool Creative Space Software

The xTool Creative Space software is used to design and control your engraving projects.

1. Kết nối thiết bị: Ensure your D1 Pro is connected to your computer via USB.
2. Open Software: Launch xTool Creative Space.
3. Thiết kế/Nhập khẩu: Create your design or import an existing one. For text, use the text tool and input your desired message.
4. Đặt tham số:
   • Kích cỡ: Adjust the size of your design. Ensure the lock icon is engaged to maintain aspect ratio.
   • Laser Mode: Select "Laser flat" for flat materials or "Laser cylindrical" for use with the RA2 Pro. If using RA2 Pro, select "Chuck" mode and input the diameter of your object (e.g., 24mm for a ring).
   • Vật liệu: Choose "stainless steel (304)" or the appropriate material from the dropdown. The software will automatically suggest reference parameters.
   • Hoạt động: Select "Engrave".
   • Công suất/Tốc độ: Adjust power and speed settings as needed. For stainless steel, typical settings might be 100% power and 80mm/s speed.
5. Khung: Click the "Framing" button in the software. The laser will outline the engraving area on your material. Adjust the material's position if necessary. Press the button on the D1 Pro to start framing.
6. Bắt đầu khắc: Once framing is complete and you are satisfied with the placement, click "Start" in the software, then press the button on the D1 Pro to begin the engraving process.

Hình ảnh: Ultra-Fine Engraving Result. This image highlights the precision of the 0.03mm laser spot, demonstrating significantly finer detail compared to larger spot sizes.

Hình ảnh: No Burn Marks on Materials. This image illustrates the clean engraving results on acrylic and plastic using the 1064nm laser, contrasting with the burn marks left by a 455nm laser.

5. Bảo trì

Việc bảo trì thường xuyên đảm bảo tuổi thọ và hiệu suất tối ưu của mô-đun laser.

• Cleaning Engraved Items: After engraving, use alcohol wipes or a soft cloth with alcohol to clean the engraved surface of your material. This removes any residue and enhances the clarity of the engraving.
• Vệ sinh ống kính bằng tia laser: Periodically inspect the laser lens for dust or debris. Use a specialized lens cleaning kit or a soft, lint-free cloth with lens cleaning solution to gently clean the lens. Avoid abrasive materials.
• Vệ sinh chung: Keep the D1 Pro machine and the laser module free from dust and debris. Use a soft brush or compressed air to clean surfaces.

6. Thông số kỹ thuật

7. Thông tin bảo hành

The xTool 1064nm Infrared Laser Module comes with a Bảo hành 1 năm của nhà sản xuất. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official xTool webtrang web hoặc liên hệ với bộ phận hỗ trợ khách hàng.

8. Hỗ trợ khách hàng

For any questions, technical assistance, or support, please utilize the following resources:

• Hỗ trợ qua Email: Vui lòng liên hệ qua email để biết thêm chi tiết.
• Trò chuyện trực tiếp: Access live chat for immediate assistance.
• Hỗ trợ qua điện thoại: Vui lòng liên hệ với đội ngũ kỹ thuật của chúng tôi qua điện thoại.
• Cộng đồng trực tuyến: Join the xTool Facebook group for community support and tips.

Hình ảnh: Multi-Channel Service. This image illustrates the various support channels available for xTool users, including email, live chat, phone, and community forums.

Hình ảnh: Technical Service Team. A friendly face from the xTool technical support team, emphasizing readily available assistance.