EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Mẫu: ZM4328

1. Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Hướng dẫn an toàn

  • An toàn điện: Việc lắp đặt phải được thực hiện bởi thợ điện có trình độ chuyên môn theo quy định về hệ thống điện địa phương. Đảm bảo đã ngắt nguồn điện trước khi lắp đặt hoặc bảo trì.
  • Tậptage: This product operates on a 230V AC power supply.
  • Xếp hạng IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Nguồn sáng: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Nhiệt độ hoạt động: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Nội dung gói hàng

Xác minh rằng tất cả các thành phần đều có sẵn trước khi bắt đầu cài đặt:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Thiết lập và Cài đặt

Thực hiện theo các bước sau để cài đặt đúng cách:

  1. Ngắt nguồn: Trước khi bắt đầu, hãy đảm bảo nguồn điện chính cung cấp cho khu vực lắp đặt đã được tắt tại cầu dao.
  2. Chuẩn bị bề mặt lắp đặt: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Gắn giá đỡ: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
Mặt sau view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Hình 3: Phía sau view Có kèm giá đỡ.

  1. Dây điện: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Secure Light Fixture: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Khôi phục điện: Switch the main power supply back on.

5. Hướng dẫn vận hành

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Chức năng cảm biến chuyển động

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Phạm vi phát hiện: Adjusts the maximum distance at which motion is detected.
  • Thời gian giữ: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.

Ghi chú: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Bảo trì

  • Vệ sinh: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Bảo vệ côn trùng: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Không có bộ phận nào người dùng có thể tự bảo dưỡng: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

Vấn đềNguyên nhân có thểGiải pháp
Đèn không bật.Không có nguồn điện.
Đấu dây không chính xác.
Cài đặt cảm biến ánh sáng ban ngày quá cao.
Kiểm tra cầu dao và kết nối nguồn điện.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
Đèn sáng liên tục.Đã phát hiện chuyển động liên tục.
Thời gian giữ cài đặt quá dài.
Cảm biến trục trặc.
Ensure no constant movement in the detection area.
Adjust the hold time setting on the DIP switches to a shorter duration.
Nếu sự cố vẫn tiếp diễn, vui lòng liên hệ bộ phận hỗ trợ.
Light turns on/off too frequently.Độ nhạy quá cao.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Sensor does not detect motion.Sensitivity too low.
Detection range too narrow.
Obstruction blocking sensor.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Thông số kỹ thuật

Thương hiệuEMOS
Số hiệu mẫuZM4328
Kích thước (Đường kính x Chiều cao)220 mm x 53 mm (approx. 8.66 in x 2.09 in)
Cân nặng622 gram (khoảng 1.37 lbs)
Quyền lực15 Watt
Thông lượng sáng1500 lumen
Nhiệt độ màu4000 Kelvin (Màu trắng trung tính)
Chỉ số hoàn màu (CRI)80
Incandescent Equivalence100 Watt
Tậptage230 vôn AC
Xếp hạng IPIP54
Vật liệuAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
Tính năng đặc biệtMicrowave Motion Detector, Energy-saving, Waterproof
Lớp học về hiệu quả năng lượngE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Hình 6: Kích thước sản phẩm.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Bảo hành và Hỗ trợ

Bảo hành

This EMOS ZM4328 TORI LED Ceiling Light comes with a Bảo hành 3 năm kể từ ngày mua. Vui lòng giữ lại hóa đơn mua hàng để yêu cầu bảo hành. Bảo hành bao gồm các lỗi về vật liệu và tay nghề trong điều kiện sử dụng bình thường.

Hỗ trợ khách hàng

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS webđịa điểm.

Tài liệu liên quan - ZM4328

Trướcview Đèn tường LED EMOS ZM3131 ZM3231 với cảm biến PIR - Thông số kỹ thuật và hướng dẫn sử dụng
Thông tin chi tiết và hướng dẫn sử dụng cho đèn tường LED EMOS ZM3131 và ZM3231 tích hợp cảm biến PIR. Bao gồm thông số kỹ thuật, hướng dẫn lắp đặt và cảnh báo an toàn.
Trướcview Cảm biến chuyển động PIR EMOS G1125: Thông số kỹ thuật và hướng dẫn lắp đặt
Thông số kỹ thuật chi tiết, tính năng và hướng dẫn lắp đặt cảm biến chuyển động PIR EMOS G1125. Tìm hiểu về phạm vi phát hiện, độ nhạy, công suất và nhiều thông tin khác.
Trướcview EMOS LED Panels: Recessed & Built-in Lighting - Specifications, Installation, and Warranty
Comprehensive guide to EMOS LED panels, including recessed and built-in models (ZD11xx and ZD21xx series). Features detailed specifications, installation instructions, safety warnings, energy efficiency information, and warranty details for indoor lighting applications.
Trướcview EMOS LED Ceiling Luminaires - Model Information and Installation Guide
Comprehensive guide for EMOS LED ceiling luminaires, including model specifications, installation instructions, and safety warnings. Covers models ZM4111, ZM4112, ZM4311, ZM4312, ZM4113, ZM4114, ZM4313, ZM4314.
Trướcview Cảm biến chuyển động PIR EMOS GS11111 - Điều khiển chiếu sáng tự động trong nhà
Thông tin chi tiết về cảm biến chuyển động PIR EMOS GS11111, bao gồm thông số kỹ thuật, hướng dẫn lắp đặt và hướng dẫn an toàn cho hệ thống điều khiển chiếu sáng tự động trong nhà.
Trướcview Đèn pha LED EMOS ZS2313W, ZS2333W, ZS2323W tích hợp cảm biến PIR: Thông số kỹ thuật và hướng dẫn lắp đặt.
Thông số kỹ thuật toàn diện, hướng dẫn lắp đặt, hướng dẫn bảo trì và cảnh báo an toàn cho đèn pha LED EMOS ZS2313W, ZS2333W và ZS2323W tích hợp cảm biến chuyển động PIR. Bao gồm chi tiết về thông số cảm biến PIR, lắp đặt, đấu dây và tuân thủ các tiêu chuẩn sản phẩm.