Hướng dẫn sử dụng bộ khởi động cảm biến thông minh an ninh gia đình Lorex.

1. Sản phẩm hếtview

The Lorex Home Security Smart Sensor Starter Kit provides essential home security without relying solely on video monitoring. This kit allows you to receive alerts when motion is detected or when a door or window is opened, enhancing your privacy while maintaining security. The system is managed through the Lorex Home mobile application and can be expanded with additional sensors.

Image: The complete Lorex Smart Sensor Starter Kit, including the circular Sensor Hub, the larger motion sensor, and two smaller window/door sensors.

2. Những gì bao gồm

Your Lorex Home Security Smart Sensor Starter Kit includes the following components:

• 1 x Lorex Sensor Hub (AY41TR)
• 1 x PIR (Passive Infrared) Motion Sensor (AM41TK)
• 2 x Window/Door Sensors (AK41TK)

3. Hướng dẫn cài đặt

Follow these steps to set up your Lorex Smart Sensor Starter Kit.

3.1. Lorex Sensor Hub Setup

1. Bật nguồn: Connect the Sensor Hub to a power outlet using the provided power adapter. The LED indicator on the hub will illuminate.
2. Kết nối mạng: Ensure your Sensor Hub is connected to your home Wi-Fi network. Refer to the Lorex Home app for detailed instructions on connecting the hub to your network.

Image: The Lorex Sensor Hub, featuring a central button with a blue LED ring, indicating its status.

3.2. PIR Motion Sensor Setup

1. Lắp đặt pin: Open the battery compartment of the motion sensor and insert the required battery (CR2450). Ensure correct polarity.
2. Lắp đặt: Choose a suitable location for the motion sensor, typically in a corner or on a wall, where it can cover the desired area. Use the included mounting hardware or adhesive strips for installation. Avoid placing it near heat sources or direct sunlight.
3. Ghép nối: Follow the instructions in the Lorex Home app to pair the motion sensor with your Sensor Hub. This usually involves pressing a button on the sensor to initiate pairing mode.

Image: The Lorex PIR Motion Sensor, a compact white unit with a prominent black infrared lens for detecting movement.

3.3. Window/Door Sensor Setup

1. Lắp đặt pin: Open the battery compartment of each window/door sensor and insert the required battery (CR1632). Ensure correct polarity.
2. Lắp đặt: Mount the two parts of the sensor (main sensor and magnet) on a window or door frame. The two parts must be aligned and within 1 cm (0.4 inches) of each other when the window/door is closed. Use the included adhesive strips or screws.
3. Ghép nối: Follow the instructions in the Lorex Home app to pair each window/door sensor with your Sensor Hub. This typically involves pressing a button on the sensor to initiate pairing mode.

Image: A pair of Lorex Window/Door Sensors, consisting of a main sensor unit and a smaller magnetic contact, designed to detect opening and closing.

3.4. Lorex Home App Pairing

1. Tải ứng dụng: Download the Lorex Home app from your device's app store (available for Android and iPhone).
2. Tạo tài khoản: Open the app and create a Lorex account or log in if you already have one.
3. Thêm thiết bị: Follow the in-app prompts to add your Sensor Hub and then each individual sensor. The app will guide you through the pairing process for each component.

4. Hướng dẫn vận hành

Once your sensors are set up and paired, you can manage your security system through the Lorex Home app.

4.1. Security Modes

The Lorex Home app allows you to customize your monitoring with different security modes:

• Chế độ ở nhà: Typically arms perimeter sensors (e.g., window/door sensors) while allowing free movement inside.
• Chế độ đi vắng: Fully arms all sensors, including motion sensors, for comprehensive protection when no one is home.
• Chế độ giải giáp: All sensors are inactive, allowing unrestricted movement without triggering alerts.

You can configure which sensors are active in each mode via the app settings.

4.2. Thông báo

The Lorex Home app provides instant push notifications to your smartphone when a sensor is triggered. You can customize notification settings for each sensor and mode within the app.

4.3. Integration with Lorex Devices

The Smart Sensor Starter Kit can be used as a standalone system or integrated with select Lorex DVRs, NVRs, and standalone WiFi cameras. This allows for advanced functionalities such as triggering camera recordings or pan/tilt movements upon sensor activation. Refer to your Lorex camera or recorder manual for specific integration steps.

5. Bảo trì

5.1. Thay thế pin

The motion sensor and window/door sensors are battery-powered. When battery levels are low, you may receive notifications via the Lorex Home app. Replace batteries promptly to ensure continuous operation:

• Cảm biến chuyển động: Requires 1 x CR2450 battery.
• Cảm biến cửa sổ / cửa: Requires 1 x CR1632 battery per sensor.

Always use fresh, high-quality batteries for optimal performance.

5.2. Vệ sinh

Wipe the sensors and hub periodically with a soft, dry cloth to remove dust and dirt. Do not use liquid cleaners or abrasive materials, as these can damage the devices.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your Lorex Smart Sensor Starter Kit, try the following troubleshooting steps:

• Cảm biến không phản hồi:
  • Kiểm tra mức pin và thay thế nếu cần thiết.
  • Ensure the sensor is within range of the Sensor Hub.
  • Re-pair the sensor with the Sensor Hub via the Lorex Home app.
• Không có thông báo:
  • Verify push notifications are enabled for the Lorex Home app in your phone's settings.
  • Check the security mode in the Lorex Home app to ensure the sensor is armed.
  • Ensure your Sensor Hub has a stable internet connection.
• Sensor Hub Offline:
  • Check the power connection to the Sensor Hub.
  • Verify your home Wi-Fi network is active and the hub is connected.
  • Restart the Sensor Hub by unplugging and re-plugging it.
• Báo động giả:
  • For motion sensors, ensure it is not placed near heat vents, direct sunlight, or areas with pets that might trigger it.
  • For window/door sensors, ensure the two parts are securely mounted and do not shift, causing false triggers.

For further assistance, refer to the Lorex support webtrang web hoặc liên hệ với dịch vụ khách hàng.

7. Thông số kỹ thuật

8. Bảo hành và Hỗ trợ

For information regarding warranty coverage, technical support, and frequently asked questions, please visit the official Lorex support webTruy cập trang web hoặc liên hệ trực tiếp với bộ phận chăm sóc khách hàng của Lorex. Giữ lại hóa đơn mua hàng để yêu cầu bảo hành.