Renata 394 SR936SW

Renata 394 SR936SW Silver Oxide Watch Battery Instruction Manual

Model: 394 SR936SW

1. Giới thiệu

This manual provides essential information for the safe and effective use of Renata 394 SR936SW Silver Oxide Watch Batteries. These high-quality, Swiss-made batteries are designed for reliable performance in various small electronic devices, particularly watches.

Có gì trong hộp

  • Renata 394 SR936SW Silver Oxide Batteries (2 Count)
Renata 394 SR936SW batteries in a blister pack

Image: A blister pack containing two Renata 394 SR936SW silver oxide batteries, ready for use.

2. Thiết lập & Cài đặt

Installing the Renata 394 SR936SW battery requires careful handling to avoid damage to the battery or the device. It is recommended to consult your device's specific instruction manual for detailed battery replacement procedures. Always ensure the device is powered off before attempting battery replacement.

General Installation Steps (for watches):

  1. Chuẩn bị không gian làm việc của bạn: Work on a clean, well-lit surface to prevent loss of small components.
  2. Open the Watch Case: Carefully open the back of your watch using appropriate watch tools.
  3. Locate the Old Battery: Identify the existing battery and its retaining clip or mechanism.
  4. Tháo pin cũ: Gently release any clips or levers holding the battery in place. Use non-metallic tweezers or a plastic tool to avoid short-circuiting the battery. Note the orientation of the old battery (positive (+) side up or down).
  5. Lắp pin mới vào: Place the new Renata 394 SR936SW battery into the compartment with the correct orientation. Ensure it sits securely.
  6. Bảo vệ pin: Re-engage any retaining clips or levers to hold the new battery firmly.
  7. Close the Watch Case: Carefully close and secure the watch back.
Watch movement with a Renata 394 SR936SW battery installed

Hình ảnh: Cận cảnh view of a watch movement with a Renata 394 SR936SW battery correctly positioned within its compartment.

Close-up of a Renata 394 SR936SW battery being inserted into a watch movement

Image: A detailed shot showing a Renata 394 SR936SW battery being carefully placed into a watch's battery slot, highlighting the precise fit.

3. Hướng dẫn vận hành

Once the Renata 394 SR936SW battery is correctly installed, your device should resume normal operation. For watches, the hands should begin to move, and any digital displays should activate. If the device does not power on, refer to the Troubleshooting section.

These batteries provide a stable 1.55V output, ensuring consistent performance for compatible devices. They are designed for high capacity retention and low self-discharge, offering a long shelf life and reliable power over time.

4. Bảo trì & Lưu trữ

Kho:

  • Store unused batteries in their original packaging at room temperature (20-25°C / 68-77°F) in a dry place.
  • Tránh nhiệt độ quá cao và ánh nắng trực tiếp.
  • Để pin xa tầm tay trẻ em và vật nuôi.

Xử lý:

  • Do not short-circuit, recharge, or dispose of batteries in fire.
  • Không trộn lẫn pin cũ và pin mới, hoặc các loại pin khác nhau.
  • If a battery leaks, avoid contact with skin and eyes. Rinse immediately with water and seek medical attention if irritation persists.

Xử lý:

Dispose of used batteries according to local regulations. Many communities offer battery recycling programs.

KHAI THÁC. Xử lý sự cố

Thiết bị không bật nguồn sau khi thay pin:

  • Kiểm tra hướng pin: Ensure the battery is inserted with the correct positive (+) and negative (-) polarity.
  • Kết nối an toàn: Verify that the battery is firmly seated in its compartment and any retaining clips are properly engaged.
  • Kiểm tra mảnh vỡ: Check the battery contacts and compartment for any dust, dirt, or corrosion that might impede electrical contact. Clean gently with a dry, soft cloth if necessary.
  • Verify Battery Functionality: If possible, test the new battery with a battery tester to ensure it is not depleted or faulty.
  • Vui lòng tham khảo hướng dẫn sử dụng thiết bị: Refer to your device's specific instruction manual for any unique battery replacement steps or troubleshooting tips.

If issues persist, it may indicate a problem with the device itself rather than the battery. Seek professional repair if needed.

6. Thông số kỹ thuật

Renata 394 SR936SW Battery Specifications
Tính năngChi tiết
Số hiệu mẫu394/SR936SW
Loại pinBạc Oxit
Vol danh nghĩatage1.55V
Công suất danh nghĩa80mAh
Hoá học0% Mercury
Các tính năng chínhSuperior Leakage Resistance, High Capacity Retention, Low Self-Discharge, Swiss Quality
Sử dụng được đề xuấtWatches, Toys, Cameras, Calculators, Car Security Alarms, Keyless Car Remotes, Organizers, Computer Equipment (Memory Backup Battery) CMOS
Renata 394 SR936SW battery with detailed specifications

Image: A Renata 394 SR936SW silver oxide battery shown alongside a graphic detailing its voltage, capacity, diameter, height, and IEC equivalent.

7. Bảo hành & Hỗ trợ

Renata batteries are manufactured with Swiss quality standards, ensuring consistent performance. For specific warranty information or technical support, please refer to the official Renata webtrang web hoặc liên hệ với nhà bán lẻ của bạn.

Nhà sản xuất: Renata Batteries

Ngày đầu tiên có sẵn: Ngày 19 tháng 2014 năm XNUMX

Video sản phẩm chính thức:

Video: An official promotional video from Renata, titled "Renata Batteries - The Swiss Power Source," showcasing the brand's commitment to quality and precision in battery manufacturing.

Tài liệu liên quan - 394 SR936SW

Trướcview Renata Lithium Ion Polymer Batteries Safety Data Sheet
Comprehensive safety data sheet for Renata Lithium Ion Polymer Batteries, detailing product identification, hazardous ingredients, safety precautions, handling, storage, transportation, and regulatory information.
Trướcview Bảng dữ liệu an toàn sản phẩm pin lithium kim loại Renata
Bảng dữ liệu an toàn sản phẩm (Safety Data Sheet) dành cho pin lithium kim loại Renata, cung cấp thông tin về nhận dạng sản phẩm, các mối nguy hiểm, thành phần, cách sử dụng, bảo quản, vận chuyển và thải bỏ. Bao gồm phân loại của Liên Hợp Quốc và thông tin quy định.
Trướcview SMTU2450N-LF Battery Holder Technical Specification | Renata
Technical specification for the Renata SMTU2450N-LF battery holder, detailing dimensions, materials, and contact specifications.
Trướcview Hướng dẫn sử dụng đồng hồ kim Timex chức năng cao cấp
Hướng dẫn sử dụng toàn diện cho đồng hồ Timex Higher-Function Analog, bao gồm thiết lập, tính năng và bảo trì. Bao gồm hướng dẫn bằng nhiều ngôn ngữ.
Trướcview Hướng dẫn thay pin đồng hồ Swatch và thông số kỹ thuật
Hướng dẫn toàn diện về cách thay pin cho đồng hồ Swatch, bao gồm hướng dẫn chi tiết cho nhiều mẫu đồng hồ khác nhau như Chrono, Irony, Skin và danh sách đầy đủ các loại pin và thông số kỹ thuật.
Trướcview Hướng dẫn thay pin đồng hồ Swatch và danh sách pin đầy đủ
Detailed instructions for changing batteries in Swatch watches, including Standard, Skin, Touch, Fun Scuba, and Chrono models. Features a complete list of Swatch watch collections with their corresponding Renata battery designations, dimensions (mm), and voltage.