1. Giới thiệu
Thank you for choosing Linkind Solar Pathway Lights. These solar-powered lights are designed to illuminate and enhance your outdoor spaces such as gardens, walkways, yards, patios, and driveways. Featuring automatic on/off functionality, adjustable height options, and a durable waterproof design, these lights offer a convenient and energy-efficient lighting solution.

Hình 1: Hếtview of Linkind Solar Pathway Lights highlighting key features.
2. Thành phần sản phẩm
Each Linkind Solar Pathway Light unit consists of the following parts:
- Đầu nhẹ: Contains the solar panel, LED light source, and control button.
- Extension Poles: Two modular pole sections for adjustable height.
- Cổ phần đất: Pointed stake for secure installation into the ground.

Hình 2: Các bộ phận đã tháo rời view of a single Linkind Solar Pathway Light unit.
3. Thiết lập và Cài đặt
Follow these steps to assemble and install your solar pathway lights:
- Lắp ráp đèn: Connect the desired number of extension poles to the light head and then attach the ground stake to the bottom. You can choose from four different height combinations based on your preference and the installation area.
- Kích hoạt ánh sáng: Locate the red power button on the underside of the solar panel. Press the button once to activate the default low light mode.
- Sạc ban đầu: Place the assembled lights in direct sunlight for 1-2 days to ensure a full initial charge. This allows the internal battery to reach its maximum capacity before first use.
- Lắp đặt dưới đất: Insert the ground stake vertically into soft soil in your desired location. Ensure the solar panel is exposed to direct sunlight for optimal charging.

Figure 3: Illustration of various height options for assembly.
Video hướng dẫn cài đặt
Video 1: Chi tiết hơnview, installation, and light demonstration of Linkind Solar Pathway Lights.
4. Hướng dẫn vận hành
The Linkind Solar Pathway Lights are designed for ease of use with automatic functionality and multiple lighting modes.
- Tự động bật/tắt: The lights feature a light sensor that automatically turns them on at dusk and off at dawn, provided they are in an active lighting mode.
- Thay đổi chế độ chiếu sáng: Use the red power button on the light head to cycle through the available modes:
- Nhấn 1x: Low Light Mode (lasts up to 12 hours on a full charge).
- Nhấn 2x: High Light Mode (lasts up to 6 hours on a full charge).
- Nhấn 3x: Gradual Breathing Mode (light slowly dims and brightens, lasts up to 12 hours).
- Nhấn 4x: Off (turns the light off completely).

Figure 4: Visual representation of the three lighting modes and their durations.

Figure 5: Automatic charging during the day and lighting at night.
5. Bảo trì
To ensure optimal performance and longevity of your Linkind Solar Pathway Lights, follow these maintenance guidelines:
- Vệ sinh: Thường xuyên lau sạch tấm pin mặt trời bằng khăn mềm,amp Dùng khăn lau để loại bỏ bụi bẩn, mảnh vụn. Tấm pin mặt trời sạch sẽ đảm bảo quá trình sạc hiệu quả.
- Vị trí: Ensure the lights are placed in an area that receives at least 6-8 hours of direct sunlight daily. Avoid shaded areas.
- Khả năng chống chịu thời tiết: The lights are IP65 waterproof, providing excellent resistance against rain and other weather conditions. However, prolonged submersion is not recommended.

Figure 6: The lights are designed to be waterproof for outdoor use.
KHAI THÁC. Xử lý sự cố
If your solar pathway lights are not functioning as expected, consider the following:
- Đèn không bật: Ensure the light is in an active mode (not 'Off'). Press the red button to cycle through modes. Verify the solar panel is receiving sufficient direct sunlight.
- Thời lượng chiếu sáng ngắn: Make sure the solar panel is clean and free from obstructions. Relocate the light to an area with more direct sunlight if necessary.
- Đầu ra ánh sáng mờ: Allow 1-2 full days of charging in direct sunlight for the battery to reach full capacity.
7. Thông số kỹ thuật
| Tính năng | Chi tiết |
|---|---|
| Thương hiệu | Liên kết |
| Số hiệu mẫu | LL28004-WW-US-8 |
| Màu sắc | SP4-Warm White |
| Vật liệu | Nhựa (Acrylonitrile Butadiene Styrene) |
| Nguồn điện | Năng lượng mặt trời |
| Loại nguồn sáng | DẪN ĐẾN |
| Độ sáng | 200 Lumen |
| Màu sáng | Trắng ấm (3000K) |
| Mức độ chống nước | Không thấm nước (IP65) |
| Tính năng đặc biệt | 2 brightness modes, Adjustable Height, Auto On/OFF and Dusk to Dawn, Convenient external switch |
| Kích thước sản phẩm | 8"L x 6"W x 4"H (variable height) |
| Trọng lượng sản phẩm | 4.69 pound (cho gói 8 chiếc) |
| Pin | Cần có 1 pin Lithium Ion (đã bao gồm) |

Figure 7: Key lighting specifications: 3000K warm light and 200 lumens brightness.
8. Bảo hành và Hỗ trợ
For warranty information, technical support, or any product-related inquiries, please refer to the documentation included with your purchase or contact Linkind customer service directly. Contact details are typically provided in the product packaging or on the official Linkind webđịa điểm.