AODELAN E4 Wireless Flash Remote Trigger

1. Giới thiệu

The AODELAN E4 is a TTL transmitter designed for wireless synchronization of AODELAN flashes with compatible Sony cameras. It supports both TTL (Through-The-Lens) automatic exposure control and manual exposure adjustment, offering flexibility for various photographic needs. This device is also compatible with Profoto Air system flashes, allowing for integrated control.

This manual provides essential information for the proper setup, operation, and maintenance of your AODELAN E4 Wireless Flash Remote Trigger.

2. Sản phẩm hếtview

2.1 Các tính năng chính

• Đồng bộ tốc độ cao (HSS): Supports shutter speeds up to 1/8000s, enabling flash photography in bright ambient light.
• Chế độ TTL: Provides automatic flash exposure control for convenient point-and-shoot operation.
• Kiểm soát không dây: Operates on a 2.4 GHz frequency with a triggering range of up to 200m (656ft) and remote control range up to 100m (330ft) for TTL.
• Multiple Channels and Groups: Features 8 digital channels and 3 groups (A, B, C) per channel for independent flash control.
• Profoto Compatibility: Wirelessly triggers and manually controls Profoto lights with built-in Air system, including flash power and modeling light control.
• Six Functions: Includes High-Speed Sync, remote control (lamp head, modeling lamp, energy adjustment), power saving, relay state, and firmware update via USB.

2.2 Nội dung gói

Xác minh rằng tất cả các mục đều có trong gói hàng:

• AODELAN E4 Wireless Flash Remote Trigger
• Dây đeo cổ
• Hướng dẫn sử dụng

Figure 1: Package contents including the AODELAN E4 trigger, lanyard, and user manual.

2.3 Nhận dạng thành phần

Hình 2: Mặt trước view of the AODELAN E4 with labeled controls. Key elements include the Display, Mode Button, Sync Button, Channel/Beeper Button, Head Button, Model Button, Energy Adjustment Buttons, Group Buttons (A, B, C), Test Button, Indicator, and Power Button.

Hình 3: Mặt bên và mặt đáy view of the AODELAN E4. This image highlights the Battery Compartment, USB Port, Strap Hole, Hot Shoe Mounting Foot, and Mounting Foot Lock Lever. The display shows Group, Energy, Modeling Light Status, Battery Level, Mode, Sync, and Channel indicators.

3. Thiết lập

3.1 Lắp đặt pin

1. Locate the battery compartment on the side of the AODELAN E4 (refer to Figure 3).
2. Mở nắp ngăn chứa pin.
3. Lắp hai pin AAA, đảm bảo lắp đúng cực (+/-).
4. Đóng chặt nắp ngăn chứa pin.

3.2 Gắn vào máy ảnh

The AODELAN E4 is designed to be mounted on the camera's hot shoe.

1. Slide the hot shoe mounting foot of the E4 into the camera's hot shoe.
2. Secure the trigger by rotating the mounting foot lock lever (refer to Figure 3) until it is firmly attached.

Figure 4: The AODELAN E4 trigger shown mounted on a camera hot shoe, indicating compatibility with standard single pin contact hot shoe mounts.

4. Hướng dẫn vận hành

4.1 Bật/Tắt nguồn

Press and hold the Power Button (refer to Figure 2) to turn the E4 on or off. The indicator light will illuminate when the device is powered on.

4.2 Mode Selection (TTL / Manual)

Nhấn nút Nút chế độ (refer to Figure 2) to switch between TTL (Through-The-Lens, Automatic) and M (Manual) modes. The selected mode will be displayed on the screen.

• Chế độ TTL: The camera automatically determines the flash output for correct exposure.
• Chế độ thủ công: Allows for manual adjustment of flash power using the Energy Adjustment Buttons.

4.3 Channel and Group Selection

The E4 supports 8 channels and 3 groups (A, B, C) per channel. This allows for independent control of multiple flashes without interference.

• Nhấn nút Channel/Beeper Button (refer to Figure 2) to cycle through available channels (1-8).
• Sử dụng Group Buttons (A, B, C) to select and adjust individual flash groups.

Figure 5: Illustration of the AODELAN E4's ability to control multiple flashes independently across 8 frequency channels and 3 groups (A, B, C) in a studio environment.

4.4 Đồng bộ tốc độ cao (HSS)

The E4 supports HSS up to 1/8000s. This feature allows you to use wider apertures in bright conditions or freeze fast motion with flash.

• Ensure your camera and flash units support HSS.
• The E4 will automatically engage HSS when the camera's shutter speed exceeds the normal flash sync speed (typically 1/250s).

4.5 Chức năng điều khiển từ xa

The E4 allows for remote control of connected Profoto flashes, including:

• Energy Adjustment: Sử dụng Energy Adjustment Buttons (refer to Figure 2) to increase or decrease flash power.
• Mô hình hóa Lamp Điều khiển: Sử dụng Nút mô hình (refer to Figure 2) to control the modeling lamp on compatible flashes.
• Lamp Kiểm soát đầu: Sử dụng Nút đầu (refer to Figure 2) for specific lamp head adjustments if supported by the flash.

4.6 Kiểm tra Flash

Nhấn nút Nút kiểm tra (refer to Figure 2) to fire a test flash and confirm connectivity with your flash units.

5. Bảo trì

To ensure the longevity and optimal performance of your AODELAN E4:

• Giữ thiết bị sạch sẽ, không bụi bẩn và hơi ẩm. Sử dụng vải mềm, khô để lau chùi.
• Tránh để thiết bị tiếp xúc với nhiệt độ quá cao hoặc ánh nắng trực tiếp trong thời gian dài.
• Tháo pin ra nếu không sử dụng thiết bị trong thời gian dài để tránh rò rỉ.
• Bảo quản thiết bị ở nơi khô ráo, thoáng mát.

KHAI THÁC. Xử lý sự cố

If you encounter issues with your AODELAN E4, refer to the following common troubleshooting steps:

• Thiết bị không bật nguồn: Check if the AAA batteries are correctly inserted and have sufficient charge. Replace batteries if necessary.
• Flash not triggering:
  • Ensure the E4 is securely mounted on the camera's hot shoe.
  • Verify that the E4 and the flash unit are set to the same channel and group.
  • Check the flash unit's power and readiness.
  • Confirm that the camera's flash settings are appropriate for external flash use.
• Incorrect exposure in TTL mode: Ensure the flash unit is compatible with TTL and that its settings are not overriding the E4's commands. Check for any exposure compensation set on the camera or flash.
• HSS không hoạt động: Confirm that both your camera and flash unit support High-Speed Sync. Ensure the camera's shutter speed is set above its normal sync speed.
• Phạm vi hoạt động hạn chế hoặc bị nhiễu: Ensure there are no major obstructions between the E4 and the flash units. Avoid environments with strong 2.4 GHz interference.

If problems persist after attempting these steps, please contact AODELAN customer support for further assistance.

7. Thông số kỹ thuật

Figure 6: Visual representation of the AODELAN E4's dimensions and a summary of its technical specifications.

8. Bảo hành và Hỗ trợ

AODELAN products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official AODELAN webđịa điểm.

For technical support, troubleshooting assistance, or service inquiries, please contact AODELAN customer support through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.