Thiết lập thời gian
Use the time setting knob located on the back of the clock to adjust the hour and minute hands. Rotate the knob clockwise or counter-clockwise until the correct time is displayed.
Model: B09JKWDFTT | Brand: ROTH
This manual provides comprehensive instructions for the ROTH Educational Alarm Clock and Stamp Set. Designed to assist children in learning to tell time, this set includes an alarm clock with various features and a complementary stamp set for practice. Please read this manual thoroughly before use to ensure proper operation and safety.

WARNING: CHOKING HAZARD – Small parts. Not suitable for children under 3 years.
Vui lòng kiểm tra gói hàng để đảm bảo có đầy đủ các mặt hàng:

The alarm clock requires 1x AA battery (not included).

Use the time setting knob located on the back of the clock to adjust the hour and minute hands. Rotate the knob clockwise or counter-clockwise until the correct time is displayed.
Use the alarm setting knob, also on the back, to set the desired alarm time. The alarm will sound a beep when the set time is reached. To activate or deactivate the alarm, use the ON/OFF switch located on the side of the clock.

When the alarm sounds, press the large button on the top of the clock to activate the snooze function. The alarm will temporarily stop and sound again after a short interval.
The clock features a backlight for visibility in low-light conditions. Press the backlight button, typically located on the top or side, to illuminate the clock face.
The included wooden stamp and ink pad are designed to help children practice telling time. The stamp creates a clock face outline on paper, allowing children to draw in the hands for various times.


| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đồng hồ không hoạt động | Pin hết hoặc lắp không đúng cách. | Replace battery (1x AA) or check polarity. |
| Báo thức không kêu | Báo thức không được kích hoạt hoặc cài đặt không đúng. | Ensure alarm ON/OFF switch is in the 'ON' position and alarm time is set correctly. |
| Đèn nền không hoạt động | Battery low or backlight button not pressed. | Replace battery or press the backlight button firmly. |
| Stamp not making clear impression | Ink pad is dry or stamp not evenly inked. | Ensure ink pad is moist; re-ink stamp evenly. Replace ink pad if necessary. |
| Tính năng | Chi tiết |
|---|---|
| Kích thước sản phẩm (DxRxC) | 20 x 21.1 x 7.3cm |
| Trọng lượng sản phẩm | 350 gam |
| Tính năng đặc biệt | Snooze, Alarm, Backlight |
| Thương hiệu | ROTH |
| Độ tuổi (Mô tả) | Những đứa trẻ |
| Vật liệu | Wood (Stamp), Plastic (Clock) |
| Màu sắc | Hồng |
| Nguồn điện | Pin chạy bằng |
| Loại pin | 1x AA (không bao gồm) |
This product comes with a standard manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the product packaging or contact ROTH customer support directly. If you encounter any issues or have questions not covered in this manual, please reach out to the retailer or manufacturer for assistance.
For further support, please visit the official ROTH webtrang web hoặc liên hệ với bộ phận dịch vụ khách hàng của họ.
![]() |
Roth Touchline SL Valve Module Quick Guide: Installation and Setup Concise guide for installing and setting up the Roth Touchline SL Valve module for heating systems, featuring 'Heat on demand' mode. Includes connection details and interface setup. |
![]() |
Hướng dẫn lắp đặt bộ điều nhiệt Roth Touchline® SL Hướng dẫn lắp đặt toàn diện cho bộ điều nhiệt phòng và hệ thống sưởi sàn Roth Touchline® SL. Tìm hiểu cách ghép nối, đăng ký và cấu hình bộ điều nhiệt của bạn với cảm biến sàn và bộ điều khiển. |
![]() |
Hướng dẫn lắp đặt bộ điều nhiệt Roth Touchline SL Hướng dẫn lắp đặt và thiết lập toàn diện cho bộ điều nhiệt Roth Touchline SL và SL Plus. Bao gồm lắp đặt trên tường, đấu dây, kết nối cảm biến, ghép nối với bộ điều khiển, cấu hình cảm biến sàn và các chức năng nâng cao. |
![]() |
Hướng dẫn lắp đặt bộ điều nhiệt Roth Touchline® SL Comprehensive installation guide for the Roth Touchline® SL Standard room thermostat and related models. Learn how to install, pair, and configure your thermostat and floor sensors for optimal heating control with Roth's underfloor heating systems. |
![]() |
Hướng dẫn lắp đặt hệ thống đường ống Roth MultiPex® PEX Hướng dẫn lắp đặt này cung cấp hướng dẫn chi tiết cho hệ thống đường ống Roth MultiPex® PEX. Tài liệu bao gồm các bước thiết yếu như cắt, uốn và cố định ống, cùng với các cảnh báo về việc sử dụng dung môi. Tài liệu cũng bao gồm dữ liệu kỹ thuật toàn diện và danh sách các phụ kiện tương thích, được trình bày bằng tiếng Anh để dễ hiểu. Phù hợp cho các ứng dụng cấp nước uống và sưởi ấm trung tâm. |
![]() |
Hướng dẫn lắp đặt Roth MultiPex®: Ống và phụ kiện Hướng dẫn lắp đặt toàn diện hệ thống ống Roth MultiPex®, bao gồm cắt, uốn, cố định, lắp ráp, thông số kỹ thuật và phụ kiện. Tìm hiểu cách lắp đặt các giải pháp đường ống Roth một cách an toàn và hiệu quả. |