Giới thiệu
This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your Einhell FREELEXO 350 Robot Battery Lawn Mower. Please read this manual thoroughly before using the device and keep it for future reference.
Figure 1: Einhell FREELEXO 350 Robot Battery Lawn Mower. This image shows the red and black robotic lawn mower from a front-side angle, highlighting its compact design and robust wheels.
Hướng dẫn an toàn
Luôn tuân thủ các biện pháp phòng ngừa an toàn sau đây để tránh thương tích và hư hỏng cho thiết bị:
- Ensure the work area is clear of obstacles and people, especially children and pets, before operation.
- Do not operate the mower in wet conditions or during rain. The integrated rain sensor will automatically send the mower back to its charging station.
- Regularly inspect the blades for wear and damage. Replace worn blades promptly.
- The mower is equipped with impact, tilt, and lift sensors for safety. Do not attempt to bypass these features.
- Activate the anti-theft PIN code feature to secure your device.
- Always turn off the mower and remove the battery before performing any maintenance or cleaning.
Thiết lập và cài đặt
The FREELEXO 350 comes with all necessary installation equipment for lawn sizes up to 350 m². This includes 110 meters of boundary wire, 150 fastening hooks, three replacement blades, and four connecting clips.
1. Lắp đặt dây ranh giới
The boundary wire defines the mowing area. Lay the 110 meters of boundary wire around the perimeter of your lawn, securing it with the provided fastening hooks. Ensure the wire is laid flat and taut to prevent tripping hazards and ensure proper mower operation.
Hình 2: Ví dụample of boundary wire installation. This diagram illustrates how to lay the boundary wire around a lawn area, including obstacles and pathways, to define the mowing zone for the robotic mower.
2. Vị trí đặt trạm sạc
Place the charging station on a flat, level surface within the boundary wire area, preferably in a shaded location with access to a power outlet. Connect the boundary wire ends to the charging station as per the detailed instructions in the full manual.
Figure 3: The charging station for the Einhell FREELEXO 350. This image shows the black charging base where the robotic mower returns to recharge its battery.
3. Sạc pin lần đầu
Before first use, ensure the 2.0 Ah Power X-Change battery is fully charged. Insert the battery into the mower or charge it directly using a compatible Einhell Power X-Change charger.
Figure 4: Hand inserting the Power X-Change battery into the robotic lawn mower. This image demonstrates the easy access compartment for battery installation and removal.
Hướng dẫn sử dụng
The FREELEXO 350 is designed for autonomous operation, ensuring consistent lawn care.
1. Lập trình thời gian cắt cỏ
Mowing times can be programmed in 8 stages using the intuitive keypad on the mower. This allows you to set a schedule that suits your lawn's needs and your personal preferences. A separate program can also be set for mowing additional areas not part of the main lawn.
Figure 5: Close-up of the Einhell FREELEXO 350's control panel. This image shows the buttons for setting mowing times (e.g., 4H, 6H, 8H, 10H) and the central dial for cutting height adjustment.
2. Điều chỉnh chiều cao cắt
The cutting height can be adjusted from 20 mm to 60 mm to achieve your desired lawn length. Use the central dial on the mower's control panel to select the appropriate height setting.
Figure 6: Hand adjusting the cutting height dial on the robotic lawn mower. This image highlights the ease of setting the desired grass length.
3. Chức năng tự động
- Cảm biến mưa: The integrated rain sensor detects precipitation and automatically sends the mower back to its charging station to protect it from adverse weather.
- Trả về pin yếu: When the battery power is low, the mower automatically returns to the charging station to recharge, ensuring continuous operation.
- Cảm biến an toàn: Impact, tilt, and lift sensors ensure the mower stops or adjusts its operation if it encounters an obstacle, is lifted, or tilted, enhancing safety.
BẢO TRÌ
Regular maintenance ensures the longevity and optimal performance of your FREELEXO 350.
1. Thay thế lưỡi dao
The mower is supplied with three replacement blades. Inspect the blades regularly for sharpness and damage. Dull or damaged blades can affect cutting quality and increase battery consumption. Replace them as needed following the instructions in the full manual.
Hình 7: View of the mower's underside, showing the rotating disc with three cutting blades. The arrows indicate the direction of rotation for effective mowing.
2. Vệ sinh
Keep the mower's chassis, wheels, and sensors clean. Use a soft brush or cloth to remove grass clippings and dirt. Do not use high-pressure washers or immerse the device in water.
3. Chăm sóc pin
The 2.0 Ah Power X-Change battery is designed for durability. Store the battery in a cool, dry place when not in use, and avoid extreme temperatures. For long-term storage, ensure the battery is partially charged (around 50%).
Xử lý sự cố
This section addresses common issues you might encounter with your robotic lawn mower. For more detailed troubleshooting, refer to the complete product manual.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Mower not starting or stopping unexpectedly. | Low battery, boundary wire issue, safety sensor triggered, PIN code not entered. | Check battery charge. Verify boundary wire connection. Clear any obstacles. Enter correct PIN code. |
| Hiệu suất cắt kém. | Dull or damaged blades, incorrect cutting height setting, excessive grass height. | Replace blades. Adjust cutting height. Mow more frequently or manually cut tall grass first. |
| Mower not returning to charging station. | Charging station not powered, boundary wire break, station placement issue. | Ensure charging station is plugged in. Inspect boundary wire for breaks. Reposition charging station if necessary. |
| Mower operating during rain. | Rain sensor obstructed or faulty. | Clean the rain sensor. If the issue persists, contact customer support. |
Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Thương hiệu | Einhell |
| Số hiệu mẫu | 3413992 |
| Nguồn điện | Battery Powered (Power X-Change) |
| Loại pin | Pin Lithium Ion (2.0 Ah đi kèm) |
| Vật liệu | Nhựa |
| Màu sắc | Đen, Đỏ |
| Trọng lượng sản phẩm | 12.86 kg (28.3 pound) |
| Chiều rộng cắt | 18 Centimét |
| Điều chỉnh chiều cao cắt | 8 vị trí (20 mm đến 60 mm) |
| Chế độ hoạt động | Tự động |
| Khả năng độ dốc tối đa | 35% |
| Khu vực bãi cỏ được đề xuất | Lên đến 350 m² |
Bảo hành và Hỗ trợ
Để biết thông tin chi tiết về bảo hành, vui lòng tham khảo thẻ bảo hành đi kèm sản phẩm hoặc truy cập trang web chính thức của Einhell. webtrang web. Điều khoản và điều kiện bảo hành có thể khác nhau tùy theo khu vực và nhà bán lẻ.
If you require technical support, have questions about operation, or need to order spare parts, please contact Einhell customer service or the retailer from whom you purchased the product. Keep your model number (3413992) and purchase receipt ready when contacting support.
Đối với các yêu cầu chung, bạn có thể truy cập Chính thức của Einhell webđịa điểm.
