Target TT-KR-204

Hướng dẫn sử dụng Đài FM đa phương tiện 5 băng tần TARGET TT-KR-204

Model: TT-KR-204

Giới thiệu

The TARGET TT-KR-204 is a versatile 5-band multimedia FM radio designed for clear reception and powerful audio output. It features an integrated circuit (I.C.) receiver and a super sensitive antenna for enhanced signal capture across multiple frequency bands.

This radio offers flexible power options, operating on either 3V DC (battery power) or 220V AC (corded electric), making it suitable for both portable and home use.

Nội dung gói

Khi mở hộp, vui lòng kiểm tra xem có đầy đủ tất cả các thành phần không:

  • TARGET TT-KR-204 5 Band Multimedia FM Radio Unit
  • Ăng-ten tích hợp

Note: The power cable and batteries are not included in the package and must be acquired separately.

Sản phẩm trênview

Đằng trước view of the TARGET TT-KR-204 5 Band Multimedia FM Radio

Hình 1: Mặt trước view of the TARGET TT-KR-204 radio, showing the speaker grille, tuning dial, volume knob, and frequency display.

Mặt sau view of the TARGET TT-KR-204 5 Band Multimedia FM Radio

Hình 2: Quay lại view of the TARGET TT-KR-204 radio, illustrating the battery compartment, AC power input, and band selector switch.

Các thành phần chính:

  • Núm âm lượng: Điều chỉnh mức âm lượng đầu ra.
  • Quay số điều chỉnh: Used to select desired radio frequencies.
  • Công tắc chọn băng tần: Allows switching between different frequency bands (MW, SW, FM, TV1, TV2).
  • Ăng-ten kính thiên văn: Extends for improved signal reception, particularly for FM and SW bands.
  • Người nói: Đầu ra âm thanh.
  • Hiển thị tần số: Analog display showing the current tuned frequency.
  • Power Input (AC): Dùng để kết nối với nguồn điện xoay chiều 220V.
  • Ngăn chứa pin: For 3V DC battery operation.

Cài đặt

Cấp nguồn cho Radio:

  1. Battery Operation (3V DC):
    • Xác định vị trí ngăn chứa pin ở mặt sau của radio.
    • Mở nắp pin.
    • Insert the required batteries (not included), ensuring correct polarity (+/-) as indicated inside the compartment.
    • Đóng chặt nắp pin.
  2. AC Power Operation (220V AC):
    • Obtain a compatible 220V AC power cable (not included).
    • Insert one end of the power cable into the AC power input port on the radio.
    • Cắm đầu còn lại của dây nguồn vào ổ cắm điện xoay chiều 220V tiêu chuẩn.

Always ensure the power source matches the radio's requirements to prevent damage.

Hướng dẫn sử dụng

Hoạt động cơ bản:

  1. Bật/Tắt nguồn: The volume knob typically doubles as the power switch. Rotate it clockwise to turn the radio on and counter-clockwise until it clicks to turn it off.
  2. Điều chỉnh âm lượng: Rotate the volume knob to increase or decrease the audio output.
  3. Chọn một ban nhạc: Use the band selector switch (located on the side or back, as shown in Figure 2) to choose your desired frequency band:
    • Đài phát thanh: For local FM radio stations (88-108 MHz).
    • MW (Medium Wave): For AM radio stations (550-1650 KHz).
    • SW (Short Wave): For international and long-distance broadcasts (various MHz ranges).
    • TV1/TV2: For specific TV audio broadcasts (various MHz ranges).
  4. Dò đài:
    • Kéo dài hoàn toàn ăng-ten dạng ống lồng để thu sóng tối ưu, đặc biệt là đối với các băng tần FM và SW.
    • Slowly rotate the tuning dial until you hear a clear broadcast.
    • Adjust the antenna position and length for the best signal clarity.

Tối ưu hóa việc tiếp nhận:

  • For FM and Shortwave, extend the telescopic antenna.
  • For Medium Wave (AM), the radio uses an internal ferrite bar antenna. Rotate the radio unit itself for best reception.
  • Avoid placing the radio near large metal objects, electronic devices, or concrete walls, which can interfere with reception.

BẢO TRÌ

  • Vệ sinh: Hãy dùng khăn mềm, khô để lau sạch bên ngoài radio. Không sử dụng chất tẩy rửa dạng lỏng hoặc vật liệu mài mòn.
  • Kho: When not in use for extended periods, remove batteries to prevent leakage and store the radio in a cool, dry place.
  • Thay thế pin: Replace batteries when the sound becomes distorted or the volume decreases significantly.
  • Chăm sóc ăng-ten: Cầm ăng-ten dạng ống lồng nhẹ nhàng để tránh bị cong hoặc gãy.

Xử lý sự cố

Vấn đề Nguyên nhân có thể Giải pháp
No power / Radio not turning on
  • Pin đã hết hoặc lắp không đúng cách.
  • AC power cable not connected or faulty outlet.
  • Power switch (volume knob) not fully turned on.
  • Thay pin hoặc kiểm tra cực tính.
  • Ensure AC cable is securely plugged into radio and a working outlet.
  • Rotate volume knob clockwise until it clicks.
Poor reception / Static sound
  • Ăng-ten chưa được kéo dài hoặc đặt đúng vị trí.
  • Tín hiệu yếu ở khu vực này.
  • Sự can thiệp từ các thiết bị điện tử khác.
  • Incorrect band selected.
  • Extend and adjust the telescopic antenna.
  • Try rotating the radio for MW/AM bands.
  • Move the radio away from interfering devices.
  • Ensure the correct band (FM, MW, SW, TV1, TV2) is selected.
Sound distortion (especially with AC power)
  • Issue with the internal AC-DC conversion circuit.
  • Faulty AC power supply.
  • Try operating on battery power to see if the distortion persists.
  • If distortion only occurs on AC, contact customer support for assistance.
Power input point gets heated
  • Hoạt động bình thường (hơi ấm).
  • Overload or internal component issue (excessive heat).
  • A slight warmth is normal. If it becomes excessively hot to touch or emits a burning smell, immediately disconnect power and contact customer support.

Thông số kỹ thuật

Tính năng Chi tiết
Thương hiệu Mục tiêu
Người mẫu TT-KR-204
Công nghệ Tuner FM
Băng tần radio được hỗ trợ 5 Bands (FM, MW, SW, TV1, TV2)
Nguồn điện Corded Electric (220V AC), Battery Powered (3V DC)
Kiểu hiển thị Tương tự
Thiết bị tương thích Headphone (via headphone jack, if present - not explicitly listed but common for radios)
Trọng lượng sản phẩm 500 gam
Kích thước gói hàng 28 x 18 x 10cm

Bảo hành và Hỗ trợ

Thông tin bảo hành:

Sản phẩm này đi kèm với một Bảo hành 3 tháng from the date of purchase. The warranty covers manufacturing defects only. Damage caused by misuse, accidents, or unauthorized repairs is not covered under this warranty.

Defective items may be sent to the manufacturer for repair or replacement, subject to warranty terms and conditions.

Hỗ trợ khách hàng:

For service-related queries or support, please contact:

Manufacturer: MARKETED BY :MAK TECHKRAFT LLP

Tài liệu liên quan - TT-KR-204

Trướcview Hướng dẫn sử dụng camera Target Virt - Thiết lập, lắp ráp và thông số kỹ thuật
Hướng dẫn sử dụng toàn diện cho camera Target Virt (Model 460008). Bao gồm hướng dẫn lắp ráp, cách gắn lên tường và thanh ray, hướng dẫn kết nối thiết bị, thông tin an toàn và thông số kỹ thuật sản phẩm.
Trướcview Hướng dẫn lắp ráp tủ trang trí Windham | Mục tiêu
Hướng dẫn lắp ráp chi tiết từng bước cho tủ âm tường Windham của Target. Bao gồm danh sách phần cứng, sơ đồ linh kiện và thông tin an toàn.
Trướcview Hướng dẫn sử dụng TARGET RP-12 - Hướng dẫn an toàn, bảo trì và nạp đạn
Sách hướng dẫn sử dụng toàn diện cho súng săn TARGET RP-12 Bullpup Pump Action. Bao gồm các quy tắc an toàn thiết yếu, quy trình bảo dưỡng và vệ sinh chi tiết, hướng dẫn bảo quản, hướng dẫn nạp đạn từng bước và danh sách đầy đủ các bộ phận.
Trướcview Hướng dẫn sử dụng hệ thống chấm điểm tự động Target OMNI
Sách hướng dẫn sử dụng toàn diện cho Hệ thống chấm điểm tự động Target OMNI, bao gồm thông tin an toàn, lắp ráp, gắn kết, sử dụng, hiệu chuẩn và các điều khoản bảo hành. Model 460011.
Trướcview Hướng dẫn sử dụng camera Target Virt - Thiết lập, An toàn và Thông số kỹ thuật
Hướng dẫn sử dụng toàn diện cho Camera ảo Target (Model 460008), bao gồm thông tin an toàn, hướng dẫn lắp ráp, hướng dẫn kết nối thiết bị, thông số kỹ thuật sản phẩm và các điều khoản hợp quy.
Trướcview Target Model Assembly Parts List and Specifications
Comprehensive parts list and specifications for the Target Model, detailing all components, dimensions, and quantities required for assembly. Includes hardware and structural elements.