ReSound ONE Standard Charger Case

GN ReSound ONE Standard Charger Case User Manual

Model: ONE Standard Charger Case | Brand: ReSound

Giới thiệu

This user manual provides essential information for the safe and effective use of your GN ReSound ONE Standard Charger Case. Please read this manual thoroughly before operating the device and retain it for future reference. This charger case is designed to provide convenient and reliable power for your compatible ReSound hearing aids.

Những gì bao gồm

Gói của bạn phải chứa các mục sau:

Đặc trưng

Cài đặt

  1. Giải nén: Cẩn thận loại bỏ tất cả các thành phần khỏi bao bì.
  2. Kết nối nguồn: Insert the small end of the USB charger cable into the charging port on the back of the charger case. Connect the larger end of the USB cable to the power supply plug.
  3. Cắm vào: Insert the power supply plug into a standard 110V wall outlet. Ensure the connection is secure.
  4. Mức phí ban đầu: It is recommended to fully charge the case before its first use. The indicator light on the case will show its charging status.
GN ReSound ONE Standard Charger Case open, showing two charging slots and indicator lights.

Image: The GN ReSound ONE Standard Charger Case shown open, revealing the two dedicated slots for hearing aids and small indicator lights.

Hướng dẫn sử dụng

  1. Placing Hearing Aids: Gently place your ReSound hearing aids into their respective charging slots within the case. Ensure they are correctly seated to make contact with the charging points.
  2. Khởi tạo sạc: Once correctly placed, the hearing aids will automatically begin charging. The indicator light on each hearing aid will blink to show that charging is in progress.
  3. Phí giám sát: Charging typically takes up to 3 hours for a full charge. When the hearing aids are fully charged, their indicator lights will stop blinking and remain solid green.
  4. Removing Hearing Aids: Once fully charged, carefully remove your hearing aids from the case.
  5. Sử dụng di động: The charger case can store up to three full charges, allowing you to charge your hearing aids on the go without needing a power outlet.
GN ReSound ONE Standard Charger Case with hearing aids inserted and charging.

Image: The GN ReSound ONE Standard Charger Case with two hearing aids securely placed in their charging slots.

BẢO TRÌ

Xử lý sự cố

Vấn đềNguyên nhân có thểGiải pháp
Máy trợ thính không sạc đượcHearing aids not properly seated; dirty charging contacts; case battery low.Ensure hearing aids are firmly placed in slots. Clean contacts with the provided brush. Charge the case.
Vỏ không sạc đượcUSB cable or power adapter not connected properly; faulty outlet.Check all cable connections. Try a different wall outlet.
Hearing aids not fully chargingInterruption during charging; hearing aids not compatible.Ensure hearing aids remain undisturbed during the 3-hour charge cycle. Verify compatibility with ReSound ONE hearing aids.

If problems persist after attempting these solutions, please contact ReSound customer support.

Thông số kỹ thuật

Thuộc tínhChi tiết
Thương hiệuÂm thanh lại
Nhà sản xuấtGN Âm thanh
Người mẫuONE Standard Charger Case
Kích thước gói hàng9.84 x 5.39 x 4.8 inch
Trọng lượng sản phẩm10.2 ounce (0.29 kg)
Đầu ra Voltage5 Vôn (DC)
Màu sắcBlue, Green, Red (referring to indicator lights, not case color)
Chứng nhậnCE, FCC, UL
Ngày đầu tiên có sẵnNgày 28 tháng 2021 năm XNUMX

Bảo hành và Hỗ trợ

For information regarding the product warranty, please refer to the warranty card included with your purchase or visit the official ReSound website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact ReSound customer service through their official channels. Keep your proof of purchase for warranty claims.

Contact information can typically be found on the ReSound webtrên trang web hoặc trên bao bì sản phẩm.