1. Giới thiệu
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Hình ảnh 1.1: Mặt trước view of the SEBSON Outdoor Motion Detector.
2. Hướng dẫn an toàn
Luôn tuân thủ các biện pháp phòng ngừa an toàn sau đây để tránh thương tích hoặc hư hỏng cho thiết bị:
- An toàn điện: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Tậptage: Đảm bảo khối lượng hoạt độngtage of 230V AC matches your electrical supply.
- Xếp hạng IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Lắp đặt: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Những đứa trẻ: Để vật liệu đóng gói và các bộ phận nhỏ tránh xa tầm tay trẻ em.
3. Nội dung gói hàng
Gói bao gồm:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Sản phẩm hếtview và Tính năng
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Phạm vi phát hiện: Up to 12 meters with a 180° infrared sensor.
- Adjustable Sensor Head: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- Đèn LED tương thích: Hỗ trợ đèn LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Thiết kế bền bỉ: IP44 rated for outdoor use, anthracite color, made of plastic.
Hình 4.1: Hếtview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Thiết lập và Cài đặt
Thực hiện theo các bước sau để cài đặt đúng cách:
- Chuẩn bị cho Cài đặt: Trước khi bắt đầu, hãy đảm bảo nguồn điện chính cung cấp cho khu vực lắp đặt đã được tắt tại cầu dao.
- Chọn vị trí lắp đặt: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Lắp đặt đế:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Khoan lỗ tại các điểm đã đánh dấu. Lắp tắc kê phù hợp nếu cần.
- Secure the detector's base firmly to the wall using screws.
- Kết nối dây điện: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Hình ảnh 5.1: Ví dụample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Nhà ở gần đó: Carefully close the detector housing, ensuring no wires are pinched.
- Khôi phục điện: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Operating Instructions and Adjustments
The motion detector features two adjustable dials for customizing its operation:
Hình ảnh 6.1: Cận cảnh view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Turn the dial towards the biểu tượng mặt trời for activation in brighter conditions (e.g., during the day).
- Turn the dial towards the biểu tượng mặt trăng for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Bảo trì
To ensure optimal performance and longevity of your motion detector:
- Vệ sinh: Regularly clean the sensor lens and the outer casing với chất liệu mềm, khô hoặc hơi damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Điều tra: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Các yếu tố môi trường: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đèn không bật khi phát hiện chuyển động. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Nhà sản xuất | SEBSON |
| Số hiệu mẫu | IR_OUT_BA |
| Kích thước sản phẩm (D x R x C) | 8.6 x 6 x 9.6cm |
| Cân nặng | 155 gam |
| Màu sắc | than antraxit |
| Vật liệu | Nhựa |
| Nguồn điện | AC |
| Tậptage | 230 vôn |
| Max. Power (LED) | 300 Watt |
| Max. Power (Incandescent) | 1200 Watt |
| Phương pháp cài đặt | Gắn tường (Gắn nổi) |
| Khả năng tương thích của loại bóng đèn | DẪN ĐẾN |
| Phạm vi phát hiện | 12m / 180° |
| Swiveling Angle | 300° (theo phương thẳng đứng) |
| Illumination Duration (TIME) | 10 giây - 7 phút |
| Ambient Brightness (LUX) | 3 - 2000 lux |
| Xếp hạng IP | IP44 |
| Sử dụng được đề xuất | Ngoài trời |
| Nhiệt độ định mức tối đa | 40 độ C |
| Nước xuất xứ | Trung Quốc |
10. Bảo hành và Hỗ trợ
Chính sách hoàn trả: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Hỗ trợ khách hàng: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
