Sản phẩm trênview
The Infinity Basslink Mini is a compact, powered 6x8 inch underseat subwoofer designed to deliver deep, accurate bass in a small footprint. It features a 100-watt amplifier and intelligent electronic design for reliable performance, even at high output levels. The durable die-cast aluminum enclosure minimizes size and eliminates rattles, ensuring clean audio reproduction. A wired bass volume remote control is included for convenient adjustment from the driver's seat.
Hình ảnh: Trên cùng view of the Infinity Basslink Mini subwoofer, showcasinVới thiết kế nhỏ gọn và lưới loa tiện dụng.
Các thành phần bao gồm
- 1x Underseat Subwoofer (Infinity Basslink Mini)
- 14x Vít
- 4x Small Metal Plates (for mounting)
- 1x dây khai thác
- 1x Bass Volume Remote Control (with cable)
- Cầu chì 1x 15A
Thiết lập và cài đặt
Proper installation is crucial for optimal performance and safety. It is recommended to have this product installed by a qualified professional. Ensure the vehicle's battery is disconnected before beginning installation.
1. Chọn vị trí lắp đặt
The Basslink Mini is designed for underseat mounting. Select a location that allows for adequate ventilation and does not obstruct vehicle controls or passenger movement. Ensure the mounting surface is stable and secure.
Image: The Infinity Basslink Mini subwoofer with its dimensions clearly marked: 14.57 inches (width), 10.04 inches (depth), and 4.65 inches (height). This illustrates its compact size for underseat installation.
2. Kết nối dây
Refer to the wiring diagram in the included user manual for detailed connection instructions. Key connections include:
- Power (12V+): Connect directly to the vehicle's battery positive terminal via the supplied 15A fuse.
- Mặt đất (GND): Kết nối với bề mặt kim loại sạch, không sơn của khung xe.
- Bật từ xa (REM): Connect to the remote output of your head unit or an accessory wire that turns on with the ignition.
- Đầu vào âm thanh: Use either the high-level inputs (speaker-level) or low-level inputs (RCA) from your head unit.
- Điều khiển từ xa Bass: Connect the wired remote to the designated port for convenient bass level adjustment.
Image: Rear panel of the Infinity Basslink Mini, displaying the various input and control connections including power, ground, remote, high-level input, low-level RCA input, gain, bass boost, low pass filter, phase, and auto turn-on switch.
3. Lắp đặt loa siêu trầm
Once all wiring is connected, secure the subwoofer using the provided screws and metal plates. Ensure it is firmly attached to prevent movement during vehicle operation.
Hướng dẫn sử dụng
1. Khởi động và kiểm tra ban đầu
After installation, reconnect the vehicle's battery. Turn on your car's audio system. The subwoofer should power on automatically if the remote turn-on is correctly connected or if the auto turn-on feature is active (for high-level inputs).
2. Điều chỉnh điều khiển
- Gain Control: Adjust the gain to match the output level of your head unit. Start with the gain at minimum and slowly increase it until the bass sounds balanced with the rest of your system without distortion.
- Bộ lọc thông thấp (LPF): This control sets the upper frequency limit for the subwoofer. Adjust it to blend smoothly with your main speakers, typically between 80Hz and 120Hz.
- Tăng cường âm trầm: Use this control to enhance the bass output at a specific frequency. Use sparingly to avoid distortion.
- Công tắc pha: If the bass sounds weak or out of sync, try flipping the phase switch (0° or 180°). One setting will typically sound better than the other, indicating proper phase alignment with your main speakers.
- Điều khiển từ xa Bass: Use the wired remote to conveniently adjust the subwoofer's output level from your driving position.
BẢO TRÌ
The Infinity Basslink Mini requires minimal maintenance. Keep the unit clean and free from dust and debris. Do not use harsh chemicals or abrasive cleaners. Ensure all connections remain secure over time.
Xử lý sự cố
- Không có âm thanh:
- Check all power, ground, and remote turn-on connections.
- Verify the 15A fuse is intact.
- Ensure audio input cables (RCA or speaker-level) are securely connected.
- Confirm the head unit is powered on and sending an audio signal.
- Âm thanh bị méo:
- Reduce the gain control on the subwoofer.
- Giảm mức tăng âm trầm xuống.
- Check the audio input signal for distortion from the source unit.
- Âm trầm yếu:
- Increase the gain control.
- Adjust the low pass filter to a higher frequency.
- Try flipping the phase switch (0°/180°).
- Ensure the bass remote control is not set to minimum.
- Subwoofer Not Turning On/Off with Ignition:
- Check the remote turn-on wire connection.
- If using high-level inputs, ensure the "Auto Turn-On" switch is enabled (if applicable).
Thông số kỹ thuật
| Tên mẫu | Basslink Mini |
| Loại loa | Loa siêu trầm |
| Đường kính loa siêu trầm | 6x8 inch |
| Công suất đầu ra tối đa của loa | 200 Watt |
| Đáp ứng tần số | 150 Hz (Giới hạn trên) |
| Kiểu lắp đặt | Giá đỡ gắn dưới yên xe |
| Kích thước sản phẩm (D x R x C) | 10.04" x 14.57" x 4.65" |
| Trọng lượng sản phẩm | 9.13 pound (4.15 kg) |
| Vật liệu | Nhôm |
| Màu sắc | Đen |
| Nguồn điện | Điện có dây |
| Phương pháp kiểm soát | Xa |
| Công nghệ kết nối | Phụ trợ, Có dây |
| Chế độ đầu ra âm thanh | Âm thanh nổi |
| Mức độ chống nước | Không chống nước |
Thông tin bảo hành
The Infinity Basslink Mini comes with a full warranty. Please refer to the warranty card included in your product packaging or visit the official Infinity webVui lòng truy cập trang web để xem các điều khoản và điều kiện chi tiết liên quan đến phạm vi bảo hành, thời hạn và quy trình yêu cầu bồi thường.
Ủng hộ
For technical assistance, troubleshooting, or product inquiries, please contact Infinity customer support. Contact information can typically be found on the product packaging, the official Infinity website, or in the included warranty documentation.
