INTRATONE HTEL2-00

INTRATONE HTEL2-00 Remote Control User Manual

Model: HTEL2-00 | Brand: INTRATONE

1. Sản phẩm hếtview

The INTRATONE HTEL2-00 - 09-0102 remote control is a sophisticated device featuring 4 bi-technology 868 MHz channels. It integrates both Mifare and HF 868 MHz technologies, allowing for straightforward programming via the official www.intratone.info website or with a dedicated programmer (model 12-0115). A key security feature is its unique ten-digit identification number, ensuring personalized and secure operation. This remote offers an operating range of up to 10 meters and is broadly compatible with various electronic devices, including televisions, smartphones, cameras, and projectors. Measuring 6.5 x 3.8 x 1 cm and weighing only 30 grams, it is designed for portability and ease of use, providing optimal control over your compatible devices.

Đằng trước view of the INTRATONE HTEL2-00 remote control, showing four grey buttons with numbers 00, 000, 0000, and 0, and a small LED indicator.

Hình 1.1: Mặt trước view of the INTRATONE HTEL2-00 Remote Control.

2. Tính năng sản phẩm

  • 4 kênh: Provides control over up to four distinct functions or devices.
  • Bi-Technology: Equipped with both Mifare and HF 868 MHz technologies for versatile use.
  • Lập trình dễ dàng: Can be programmed via the official www.intratone.info website or using a dedicated programmer (model 12-0115).
  • Unique Identification: Features a unique ten-digit engraved identification number for enhanced security and personalization.
  • Khả năng tương thích rộng: Compatible with various devices including televisions, smartphones, cameras, and projectors.
  • Thiết kế nhỏ gọn: Lightweight (30 grams) and small dimensions (6.5 x 3.8 x 1 cm) for easy portability.

3. Thiết lập

3.1 Lắp đặt pin

The INTRATONE HTEL2-00 remote control uses an Alkaline battery. To install or replace the battery:

  1. Xác định vị trí ngăn chứa pin ở mặt sau của điều khiển từ xa.
  2. Cẩn thận mở nắp ngăn chứa đồ.
  3. Insert the Alkaline battery, ensuring correct polarity (+ and -).
  4. Đóng chặt nắp ngăn chứa pin.

3.2 Lập trình điều khiển từ xa

The HTEL2-00 remote control requires programming to function with your specific devices or access systems. Programming can be done via two methods:

  • Lập trình trực tuyến: Visit the official INTRATONE programming webtrang web tại www.intratone.info. Follow the on-screen instructions to register your remote using its unique ten-digit identification number and link it to your desired system.
  • Programmer Device: Use a dedicated INTRATONE programmer device (model 12-0115). Refer to the programmer's manual for specific instructions on how to transfer programming data to your HTEL2-00 remote.
Góc cạnh view of the INTRATONE HTEL2-00 remote control, highlighting the textured surface and the metallic key ring loop.

Hình 3.1: Góc cạnh view of the remote control, showing its compact form factor.

4. Hướng dẫn vận hành

4.1 Using the Channels

The HTEL2-00 remote control features four distinct buttons, each corresponding to a channel (00, 000, 0000, and 0). Once programmed, each button will activate its assigned function. To operate:

  1. Point the remote control towards the receiver of the device you wish to control.
  2. Press the corresponding channel button (00, 000, 0000, or 0) for the desired action.
  3. The small LED indicator on the remote will illuminate briefly when a button is pressed, indicating signal transmission.

4.2 Phạm vi hoạt động

The remote control has a maximum operating range of 10 meters (approximately 33 feet) under optimal conditions. Factors such as obstacles (walls, furniture), radio interference, and battery level can affect the effective range.

4.3 thiết bị tương thích

This remote control is designed for compatibility with a range of devices, including but not limited to:

  • Tivi
  • Smartphones (with compatible receivers/adapters)
  • Cameras (with compatible receivers/adapters)
  • Projectors (with compatible receivers/adapters)
  • Access control systems (gates, garage doors, etc., if programmed accordingly)

5. Bảo trì

5.1 Vệ sinh

To clean the remote control, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device. Do not use abrasive cleaners, solvents, or harsh chemicals.

5.2 Thay thế pin

Replace the battery when the remote's performance degrades (e.g., reduced range, inconsistent operation) or the LED indicator does not light up. Refer to Section 3.1 for battery installation instructions. Always dispose of old batteries responsibly according to local regulations.

5.3 Lưu trữ

Bảo quản điều khiển từ xa ở nơi khô ráo, thoáng mát, tránh ánh nắng trực tiếp, nhiệt độ quá cao hoặc quá thấp và độ ẩm cao. Tránh làm rơi điều khiển hoặc để nó chịu va đập mạnh.

KHAI THÁC. Xử lý sự cố

6.1 Điều khiển từ xa không phản hồi

  • Kiểm tra pin: Hãy đảm bảo pin được lắp đúng cách và có đủ điện. Thay thế nếu cần thiết.
  • Xác minh lập trình: Confirm that the remote control has been correctly programmed for the intended device or system. If unsure, attempt to reprogram it via www.intratone.info.
  • Đường ngắm: Ensure there are no obstructions between the remote control and the receiver.
  • Gần: Move closer to the device you are trying to control, ensuring you are within the 10-meter operating range.

6.2 Reduced Operating Range

  • Pin yếu: A weak battery can significantly reduce the remote's range. Replace the battery.
  • Sự can thiệp: Other electronic devices operating on similar frequencies (868 MHz) can cause interference. Try moving away from such devices.
  • Vật cản: Thick walls, metal objects, or other physical barriers can block the signal.

6.3 LED Indicator Not Lighting Up

  • Vấn đề về pin: Pin có thể đã hết hoặc được lắp không đúng cách. Hãy kiểm tra và thay pin mới.
  • Nút bị trục trặc: If only one button's LED doesn't light up, that specific button might be faulty.

7. Thông số kỹ thuật

Tính năngĐặc điểm kỹ thuật
Thương hiệuINTRATONE
Số hiệu mẫuHTEL2-00
Công nghệ kết nốiTần số vô tuyến (868 MHz)
Số lượng kênh4
Tính năng đặc biệtDigital display, Bi-technology (Mifare, HF)
Thiết bị tương thíchTelevision, Smartphone, Camera, Projector
Phạm vi tối đa10 mét
Loại pinKiềm
Kích thước sản phẩm (D x R x C)6.5 x 3.8 x 1cm
Trọng lượng sản phẩm30 gram
Nhận dạngUnique ten-digit engraved number

8. Bảo hành và Hỗ trợ

Specific warranty information for the INTRATONE HTEL2-00 remote control is not provided in this manual. For details regarding warranty coverage, terms, and conditions, please refer to the product packaging or contact INTRATONE customer support directly.

For technical support, programming assistance, or any other inquiries, please visit the official INTRATONE webtrang web hoặc liên hệ với bộ phận dịch vụ khách hàng của họ:

  • Website for Programming & Information: www.intratone.info
  • Nhà sản xuất liên hệ: Please refer to the INTRATONE official webtrang web để biết thông tin liên lạc cụ thể theo khu vực của bạn.