1. Sản phẩm hếtview
The BFT SB-BAT (P125002) is a 24v DC battery backup system designed to ensure continuous operation of your gate opener even during power outages. This kit provides a reliable power source, activating automatically when the main power supply is interrupted and recharging when power is restored.
It is compatible with various BFT gate opener models, including the Deimos BT series, VIRGO - LINX, EOS-SCE, HYDRA N, DEIMOS BT-QSC D-NETTUNO S, SB BAT/SB CARBAT (DEIMOS BT-SB 300), BT BAT 2 (URANO BT ARES 1000 & ARES 1500) NETTUNO B, VENERE D, ARGO, LIBRA C MA - LIBRA C LX.
Figure 1: Contents of the BFT P125002 SB-BAT Battery Backup Kit, including batteries, wiring, and mounting hardware.
2. Thiết lập và Cài đặt
Installation of the BFT SB-BAT kit is designed to be straightforward. It integrates with your existing BFT gate opener system.
2.1. Biện pháp phòng ngừa an toàn
- Ensure the main power to the gate opener is disconnected before beginning installation.
- Đeo thiết bị bảo vệ cá nhân (PPE) phù hợp.
- Refer to your specific gate opener's manual for compatibility and connection points.
2.2. Các bước cài đặt
- Giải nén các thành phần: Carefully remove all items from the packaging. Verify all components are present as shown in Figure 1.
- Mount the Battery Housing: Securely mount the battery housing unit near your gate opener's control board, ensuring it is protected from environmental elements.
- Kết nối pin: Insert the two 12V 1.2Ah batteries into the housing. Connect them according to the wiring diagram provided with the kit (typically in series to achieve 24V DC).
- Connect to Gate Opener: Connect the battery backup system's wiring to the designated battery input terminals on your BFT gate opener's control board. Consult your gate opener's manual for precise terminal locations.
- Dây điện an toàn: Ensure all wiring is neatly routed and secured to prevent accidental disconnections or damage.
- Khôi phục điện: Once all connections are secure and verified, restore main power to the gate opener. The smart charger board will begin charging the batteries.
Hình 2: Gần hơn view of the battery backup kit components, highlighting the batteries and connection wires.
3. Hoạt động
The BFT SB-BAT battery backup system operates automatically to provide uninterrupted gate functionality.
- Hoạt động bình thường: When main power is available, the smart charger board continuously charges and maintains the batteries.
- Điện Outage: Trong trường hợp mất điệntage, the system automatically switches to battery power, allowing the gate opener to continue functioning normally.
- Phục hồi nguồn điện: Once main power is restored, the system automatically switches back to main power and resumes charging the batteries.
4. Bảo trì
Regular maintenance ensures the longevity and reliability of your battery backup system.
- Kiểm tra trực quan: Periodically inspect the batteries and wiring for any signs of damage, corrosion, or loose connections.
- Độ sạch sẽ: Keep the battery housing and terminals clean and free of dust or debris.
- Kiểm tra sức khỏe pin: While the system has an intelligent charger, it is advisable to periodically test the battery backup by temporarily disconnecting main power to ensure the gate operates on battery power. Reconnect main power after testing.
- Thay thế pin: Batteries have a finite lifespan. If you notice a significant decrease in backup operation time, it may be time to replace the batteries. Use only recommended replacement batteries (2x 12V 1.2Ah).
KHAI THÁC. Xử lý sự cố
This section addresses common issues you might encounter with your BFT SB-BAT battery backup kit.
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Gate does not operate during power outage. |
|
|
| Batteries do not seem to be charging. |
|
|
6. Thông số kỹ thuật
Key technical specifications for the BFT SB-BAT (P125002) battery backup system:
- Người mẫu: P125002 SB-BAT
- Hệ thống Voltage: 24V một chiều
- Sạc Voltage: 27.2V
- Dòng điện sạc: 130mA
- Dung lượng pin: 2x (12V 1.2Ah)
- Exhausted Battery Protection Threshold: 20.4V
- Thời gian sạc pin: 12-14 giờ
- Cầu chì: 20A
- Nhà sản xuất: BFT
7. Bảo hành và Hỗ trợ
For warranty information or technical support, please refer to the documentation included with your purchase or contact BFT customer service directly. Keep your proof of purchase for warranty claims.
You can find more information about BFT products on their official webtrang web hoặc thông qua các nhà phân phối được ủy quyền.
