Tonton 8CH NVR Recorder B082HC5GPC

Tonton 3MP Ultra HD Wireless Security Camera System with 8-Channel NVR Recorder User Manual

Model: B082HC5GPC

1. Giới thiệu

This manual provides detailed instructions for the installation, operation, and maintenance of your Tonton 3MP Ultra HD Wireless Security Camera System with 8-Channel NVR Recorder. This system is designed for reliable surveillance, offering high-definition video recording and remote access capabilities.

The Tonton NVR supports up to 16 channels and is compatible with 4K, 8MP, 5MP, 4MP, 3MP, 2MP, and 1080P IP cameras. It features H.265 & H.264 compression technology, VGA & HDMI output (up to 4K), and supports various recording modes including full-time, scheduled, and motion detection. Remote viewing is available via a free app on smartphones, as well as software or web browsers on Mac and PC.

2. Nội dung gói hàng

Vui lòng xác minh rằng tất cả các mục được liệt kê dưới đây đều có trong gói hàng của bạn:

  • 1 x Tonton 8-Channel NVR Recorder (1TB Hard Drive Pre-installed)
  • 1 x Chuột USB
  • 1 x Power Supply for NVR
  • 1 x Hướng dẫn sử dụng (tài liệu này)

Note: Security cameras are sold separately or as part of a complete kit. This NVR is designed to work with Tonton wireless IP cameras.

3. Thiết lập hệ thống

3.1 Initial NVR Connection

  1. Kết nối NVR: Plug the provided power supply into the NVR's DC12V port and then into a power outlet.
  2. Kết nối màn hình: Kết nối màn hình với đầu ghi NVR bằng cổng HDMI hoặc VGA.
  3. Kết nối chuột: Cắm chuột USB vào một trong các cổng USB của NVR.
  4. Network Connection (Optional for initial setup, required for remote viewing): Connect an Ethernet cable from the NVR's NET port to your router for internet access.
Ở phía sau view of the Tonton NVR showing VGA, HDMI, NET, USB, and DC12V ports.

Figure 3.1: Rear panel of the NVR with connection ports.

3.2 Camera Pairing (Plug and Play)

The Tonton wireless security camera system is designed for true plug-and-play operation. Cameras automatically connect to the NVR's dedicated WiFi network.

  1. Bật nguồn máy ảnh: Connect each wireless camera to its respective power adapter and plug it into a power outlet.
  2. Kết nối tự động: The cameras will automatically search for and connect to the NVR's internal WiFi network. Live video feeds should appear on your connected monitor within minutes.
  3. Wireless Repeater Function: Cameras can act as repeaters, extending the wireless range. They connect to the NVR's WiFi, not your home WiFi.
Diagram illustrating the wireless connection between the NVR and multiple cameras, showing range with and without obstacles.

Figure 3.2: Wireless solution range and connectivity diagram.

3.3 điều khiển từ xa Viewcài đặt

ĐẾN view your camera feeds remotely, you need to connect the NVR to the internet and configure the mobile application or PC software.

  1. Kết nối Internet NVR: Ensure the NVR is connected to your router via an Ethernet cable.
  2. Tải ứng dụng: Download the free Tonton security app from your smartphone's app store (iOS or Android).
  3. Thêm thiết bị: Open the app, create an account, and follow the on-screen instructions to add your NVR. This typically involves scanning a QR code displayed on the NVR's monitor interface.
  4. PC/Mac Software: Dành cho máy tính để bàn viewing, install the dedicated software from the Tonton support webđịa điểm.

4. Hướng dẫn vận hành

4.1 Chế độ ghi

The NVR comes with a pre-installed 1TB hard drive for automatic recording. You can configure the recording mode via the NVR's on-screen menu:

  • Full-time Recording: Continuous recording 24/7.
  • Schedule Time Recording: Đặt thời gian cụ thể để ghi âm.
  • Ghi lại phát hiện chuyển động: Recording starts only when motion is detected.
Image comparing H.265+ and H.264 compression efficiency with a 24/7 clock icon, indicating storage optimization.

Figure 4.1: H.265+ compression for efficient storage.

4.2 Motion Detection and Email Alerts

The NVR supports motion detection and can send email alerts when motion is detected.

  1. Configure Motion Detection: Access the NVR's menu to define motion detection zones and sensitivity for each camera.
  2. Set Up Email Alerts: In the NVR's network settings, configure your email server details to enable email notifications. Any detected motion will trigger an email alert to your specified address.

4.3 Phát lại và sao lưu

Bạn có thể táiview ghi lại thức ăntage directly from the NVR or remotely via the app/software.

  • Phát lại cục bộ: Use the NVR's interface to search for recordings by time or event.
  • Phát lại từ xa: Access recorded videos through the mobile app or PC software.
  • Sao lưu USB: Connect a USB flash drive to the NVR's USB port to back up important video files.

5. Bảo trì

Việc bảo trì thường xuyên đảm bảo hiệu suất tối ưu và tuổi thọ của hệ thống an ninh của bạn.

  • Thiết bị sạch: Periodically wipe the NVR and camera lenses with a soft, dry cloth. Avoid abrasive cleaners.
  • Cập nhật chương trình cơ sở: Check the Tonton official website for any available firmware updates for your NVR and cameras. Follow instructions carefully for updates.
  • Quản lý ổ cứng: The 1TB HDD will overwrite older footage when full. Regularly back up critical recordings.
  • Kiểm tra nguồn điện: Hãy đảm bảo tất cả các bộ chuyển đổi nguồn được kết nối chắc chắn và không bị hư hỏng.

KHAI THÁC. Xử lý sự cố

Phần này giải quyết những vấn đề phổ biến mà bạn có thể gặp phải.

  • Không hiển thị video:
    • Check NVR power connection.
    • Verify monitor connection (HDMI/VGA) and input source.
    • Hãy đảm bảo camera đã được bật nguồn.
  • Camera không kết nối được:
    • Ensure cameras are within range of the NVR's wireless signal.
    • Check camera power.
    • If using an extension antenna, ensure it is properly installed.
    Diagram showing a security camera connected to an extension antenna for improved wireless signal.

    Figure 6.1: Wireless extension antenna setup.

  • Xa ViewKhông hoạt động:
    • Confirm NVR is connected to the internet via Ethernet.
    • Kiểm tra kết nối internet của bộ định tuyến.
    • Ensure the app/software is updated and the NVR is correctly added.
  • Không có ghi chú:
    • Verify the 1TB hard drive is detected and functioning.
    • Kiểm tra lịch ghi hình và cài đặt phát hiện chuyển động.

If issues persist, please contact Tonton technical support.

7. Thông số kỹ thuật

Thương hiệuTonton
Người mẫu8CH NVR Recorder (B082HC5GPC)
Công nghệ kết nốiHDMI, USB, VGA, Wireless
Độ phân giải quay videoSupports up to 4K 8MP/5MP/4MP/3MP/2MP 1080p
Tính năng đặc biệtKhông dây
Số lượng kênh8 (NVR supports up to 16 channels)
Dung lượng lưu trữ bộ nhớỔ cứng HDD 1TB (đã được cài đặt sẵn)
Màu sắcĐen
Nguồn điệnĐiện có dây
Thiết bị tương thíchCameras, Desktop, Smartphones, Tablets
Công nghệ ánh sáng yếuTầm nhìn ban đêm
Tổng số cổng USB2
Đầu vào videoHDMI, USB, VGA
Nhà sản xuấtTonton security
Mã số UPC740385275593
ASINB082HC5GPC
Ngày đầu tiên có sẵnNgày 8 tháng 2019 năm XNUMX

8. Bảo hành và Hỗ trợ

Your Tonton Security Camera System comes with a Bảo hành 1 năm kể từ ngày mua.

For technical assistance, troubleshooting, or warranty claims, please contact Tonton Technical Support. Refer to the contact information provided on the Tonton official webtrang web hoặc tài liệu mua hàng của bạn.

Tài liệu liên quan - 8CH NVR Recorder B082HC5GPC

Trướcview Hướng dẫn sử dụng NVR mini không dây của Tonton
Sách hướng dẫn sử dụng này cung cấp hướng dẫn toàn diện về cách thiết lập, cấu hình và vận hành hệ thống NVR mini không dây Tonton. Nội dung bao gồm mô tả giao diện, cài đặt ổ cứng, kết nối hệ thống, trình hướng dẫn thiết lập ban đầu, cấu hình mạng, cài đặt ngày/giờ, quản lý bộ nhớ, thiết lập mật khẩu, tích hợp ứng dụng, điều hướng menu, cài đặt ghi hình, phát hiện thông minh, phát lại video, sao lưu video, thêm camera IP và mở rộng phạm vi phủ sóng không dây.
Trướcview Tonton High Sensitive Weatherproof Preamp Microphone Audio Pickup Device Quick Set Up Guide
Quick setup guide for the Tonton High Sensitive Weatherproof Preamp Microphone Audio Pickup Device, detailing connections for TV/Monitor, DVR, and power supply.
Trướcview Hướng dẫn sử dụng camera IP/mạng
Hướng dẫn thiết lập và sử dụng Camera IP/Mạng, bao gồm kết nối, cài đặt phần mềm, cài đặt Wi-Fi, quản lý báo động và ghi hình trên thẻ SD.
Trướcview Thông số kỹ thuật đầu ghi hình mạng nhỏ gọn 3xLOGIC VIGIL NVR-1U-8CH:
Thông số kỹ thuật của 3xLOGIC VIGIL NVR-1U-8CH, một đầu ghi hình mạng nhỏ gọn 1U với cổng báo động và bộ chuyển mạch PoE 8 kênh tích hợp. Các tính năng bao gồm RAM 8GB, SSD 256GB, dung lượng lưu trữ lên đến 18TB, hệ điều hành Linux hoặc Windows và 8 giấy phép camera IP.
Trướcview MEGAVISION 8CH PoE NVR MV-NVR-0833H1-8P-B2: Hệ thống giám sát video chuyên nghiệp
Thông số kỹ thuật chi tiết và tính năng của MEGAVISION MV-NVR-0833H1-8P-B2, một đầu ghi hình mạng (NVR) 8 kênh cấp nguồn qua Ethernet hỗ trợ độ phân giải lên đến 16MP, khả năng phân tích video nâng cao và khả năng giám sát mạnh mẽ cho nhiều môi trường khác nhau.