1. Giới thiệu
Thank you for choosing the ANSMANN FL1600R 20W Cordless LED Work Light. This manual provides important information regarding the safe operation, setup, maintenance, and troubleshooting of your new work light. Please read these instructions carefully before use and retain them for future reference.
The ANSMANN FL1600R is designed for various craft activities, offering a balance of performance and mobility. Its compact design, battery operation, and high light output ensure comfortable and efficient work.
2. Hướng dẫn an toàn
Luôn tuân thủ các biện pháp phòng ngừa an toàn sau đây để tránh thương tích hoặc hư hỏng sản phẩm:
- Không nên nhìn trực tiếp vào nguồn sáng LED khi nó đang hoạt động, vì điều này có thể gây hại cho mắt.
- Để thiết bị tránh xa tầm tay trẻ em.
- Do not open or modify the device. Repairs should only be performed by qualified personnel.
- Use only the original power supply unit provided with the device for charging.
- Ensure the work light is placed on a stable surface to prevent it from tipping over.
- Không vận hành thiết bị nếu thấy thiết bị bị hư hỏng rõ ràng.
- The work light is IP54 rated for protection against dust and splashing water. Do not immerse it in water.
- Operate the device within the specified temperature range of -20 °C to 50 °C.
3. Nội dung gói hàng
Vui lòng kiểm tra gói hàng để biết các mục sau:
- 1x ANSMANN FL1600R 20W Cordless LED Work Light (approx. 1440 g)
- 1x Power Supply Unit (12 V/1000 mA – European plug)
- 1x Hướng dẫn sử dụng
4. Sản phẩm hếtview
The ANSMANN FL1600R features a robust design with a blue frame and a black light housing. It includes an integrated stand for flexible positioning and a handle for portability.
Hình 1: Mặt trước view of the ANSMANN FL1600R 20W Cordless LED Work Light, highlighting its blue frame and black LED housing.
5. Thiết lập
The ANSMANN FL1600R is designed for immediate use. No complex assembly is required.
- Tháo hộp: Carefully remove the work light and all accessories from the packaging.
- Vị trí: Place the work light on a stable, flat surface using its integrated adjustable stand. The stand allows for flexible angling of the light.
- Gắn kết tùy chọn: The work light features an integrated tripod mount for use with compatible tripods (sold separately). It can also be mounted using a wall-mount bracket (see Figure 2).
Figure 2: Illustration of mounting options, including a tripod stand and wall-mount bracket (accessories sold separately).
6. Hướng dẫn vận hành
The work light offers three illumination levels for various needs.
- Bật/Tắt nguồn: Locate the power button, typically on the back or side of the light housing. Press once to turn on the light.
- Điều chỉnh độ sáng: Subsequent presses of the power button will cycle through the brightness levels:
- Độ sáng 25%: Approximately 400 lumens, providing up to 10 hours of illumination.
- Độ sáng 50%: Approximately 800 lumens, providing up to 6 hours of illumination.
- Độ sáng 100%: Approximately 1600 lumens, providing up to 3 hours of illumination.
- Tắt nguồn: After cycling through all brightness levels, pressing the button again will turn off the work light.
Figure 3: Icons illustrating the key features: 20W power, 1600 lumens output, rechargeable battery, and three dimming levels.
Figure 4: The work light in a typical workshop application, demonstrating its portability and utility.
7. Sạc pin
The ANSMANN FL1600R is equipped with a rechargeable Lithium-ion battery.
- Kết nối bộ sạc: Plug the provided power supply unit into the charging port on the work light. Then, connect the power supply to a suitable wall outlet.
- Đèn báo sạc: The work light typically has an indicator light that shows the charging status. Refer to the specific indicator behavior in the product's quick start guide if available.
- Thời gian sạc: A full charge for the 32.6 Wh battery takes approximately 4 to 5 hours.
- Hoạt động trong khi sạc: Nếu lamp is switched on while charging, its brightness will be reduced to 50% to prioritize charging efficiency and prevent overheating.
8. Bảo trì
Proper maintenance ensures the longevity and optimal performance of your work light.
- Vệ sinh: Clean the exterior of the work light with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port is free of dust and debris.
- Kho: When not in use for extended periods, store the work light in a cool, dry place. It is recommended to charge the battery every 3-6 months to maintain its health.
- Chăm sóc pin: The integrated Lithium-ion battery is not user-replaceable. Do not attempt to open the battery compartment.
KHAI THÁC. Xử lý sự cố
If you encounter issues with your ANSMANN FL1600R, refer to the following common problems and solutions:
| Vấn đề | Nguyên nhân có thể | Giải pháp |
|---|---|---|
| Đèn không bật. | Pin đã hết. | Sạc pin bằng nguồn điện được cung cấp. |
| Ánh sáng yếu hoặc nhấp nháy. | Sạc pin yếu. | Sạc lại pin. |
| Quá trình sạc không bắt đầu. | Power supply not properly connected or faulty. | Ensure the power supply is securely connected to both the light and the wall outlet. Try a different outlet. Verify the power supply is not damaged. |
| Brightness reduced during charging. | Hoạt động bình thường. | This is an intended feature to protect the battery and charging circuit. Full brightness resumes once charging is complete and the charger is disconnected. |
If the problem persists after attempting these solutions, please contact ANSMANN customer support.
10. Thông số kỹ thuật
| Tính năng | Đặc điểm kỹ thuật |
|---|---|
| Số hiệu mẫu | 1600-0275 |
| Thương hiệu | ANSSMANN |
| Quyền lực | 20 Watt |
| Thông lượng sáng | 1600 lumen (tối đa) |
| Illumination Levels | 25% (400 lm, 10h), 50% (800 lm, 6h), 100% (1600 lm, 3h) |
| Nhiệt độ màu | 5000 Kelvin (Ánh sáng ban ngày trắng) |
| Chỉ số hoàn màu (CRI) | > 80 |
| Loại pin | 4x Lithium-ion (included), 32.6 Wh |
| Thời gian sạc | 4-5 giờ |
| Đầu vào Voltage | 12 Volts (via power supply) |
| Xếp hạng bảo vệ | IP54 (Chống bụi và nước bắn) |
| Nhiệt độ hoạt động | -20 °C đến 50 °C |
| Kích thước (D x R x C) | 8.5 x 28.5 x 27.5cm |
| Cân nặng | 1.48 kg (1485 g) |
| Vật liệu | Kim loại |
| Tuổi thọ trung bình | 50,000 giờ |
| Nhãn năng lượng | F (as per EU Energy Label) |
Figure 5: Key features of the work light, including 5000K daylight white, CRI > 80, temperature resistance, and IP54 rating.
Figure 6: EU Energy Label for the product, indicating an energy efficiency class of F. For more details, refer to the Cơ sở dữ liệu EPREL.
11. Bảo hành và Hỗ trợ
ANSMANN provides a Bảo hành 10 năm của nhà sản xuất for this product, excluding the battery. The battery is subject to standard warranty terms for rechargeable batteries.
For warranty claims, technical support, or spare parts availability, please contact your retailer or ANSMANN customer service directly. Availability of spare parts is guaranteed for 1 year.
Vui lòng chuẩn bị sẵn số hiệu sản phẩm (1600-0275) và bằng chứng mua hàng khi liên hệ với bộ phận hỗ trợ.
12. Thông tin môi trường
Do not dispose of the device or its battery with household waste. Electronic devices and batteries must be collected separately and recycled in an environmentally sound manner. Please use the return and collection systems available in your country for disposal.
